References
- B. Y. Hur, Y. S. Um and S. Y. Kim : Trends in Metals & Materials Engineering, "Development of Fabrication Technology for Al Foam with Lightweight -Strength", 17 (2004) 37-46
- B. Y. Hur, S. H. Park and A. Hiroshi : Mater. Sci. Forum, "Viscosity and Surface Tension of Al and Effects of Additional Element", 439 (2003) 51-56
- John Banhart: Int. J. Vehicle Des. Manufacture, "Charaterisation and application of cellular metals and metal foams", 37 (2005) 114 https://doi.org/10.1504/IJVD.2005.006640
-
D-H. Yang, B. Y. Hur and S-R. Yang: J. Alloys Compd, "Study on fabrication and foaming mechanism of Mg foam using
$CaCO_3$ as blowing agent", 461 (2008) 221-227 https://doi.org/10.1016/j.jallcom.2007.07.098 - Younghwan Song, Soo Han Park, Sang Youl Kim, Changhwan Seo and Boyoung Hur: Solid State Phenom, "A Study on Mg-Al Alloy Foams by Melt Foaming Method", 125 (2007) 1841-1844
- P. Sevilla, C. Aparicio, J. A. Planell and F. J. Gil: J Alloy Comp, "Comparison of the mechanical properties between tantalum and nickel-titanium foams implant materials for bone ingrowth applications", 439 (2007), 67-73 https://doi.org/10.1016/j.jallcom.2006.08.069
- W. Y Jang: Int J Solid Struct, "On the microstructure of open-cell foams and its effect on elastic properties", 45(7,8) (2008) 1845-1875 https://doi.org/10.1016/j.ijsolstr.2007.10.008
- A. J. and A. K: Metals 2011, "The Manufacture and Characterisation of Aluminium Foams Made by Investment Casting Using Dissolvable Spherical Sodium Chloride Bead Preforms", 1 (2011) 49-64 https://doi.org/10.3390/met1010049
- M. G and C. Hintz: Proceeding of material week 2000 conf., "Determination of Parameters for Infiltrated Metallic Foam Composites" (2000) 781.
- I. N. O.: Mater Sci Forum, "Composite production by pressure infiltration", 589 (2008) 137-142
- J. E. Niesse, M. C. Flemings and H. F. Taylor: Trans. AFS "Application of Theory in Understanding Fluidity of Metals," 67 (1959) 685-697
- M. C. Flemings: in Proceedings of the 30th International Foundry Congress, "Fluidity of Metals-Techniques for Producing Ultra Thin Section Castings", (1963) 61-81
- I. Jeon and T. Asahina: Acta Mater, "The effect of structural defects on the compressive behavior of closed-cell Al foam", 53 (2005) 3415-3423 https://doi.org/10.1016/j.actamat.2005.04.010
- J. Campbell: Castings, Butterworth-Heinemann, Oxford, Boston, (1993) 288
- M. X. Xu: Master thesis(in Chinese), "Preparation and compression property of foamed magnesium alloy", Taiyuan University of Technology in china (2009) 6.
- Mukai T, Kanahashi H and Miyoshi T: Scripta Mater, "Experimental study of energy absorption in a closed-celled aluminum foam under dynamic loading", 40 (1999) 921-927 https://doi.org/10.1016/S1359-6462(99)00038-X
- Sirong Yu: Eng Mater Des, "Compressive property and energy absorption characteristic of open-cell ZA22 foams", 30 (2009) 87-90
Cited by
- Effect of fluidity on the manufacturing of open cell magnesium alloy foams vol.4, pp.1, 2016, https://doi.org/10.1016/j.jma.2015.11.007
- Current Status and Recent Developments in Porous Magnesium Fabrication 2017, https://doi.org/10.1002/adem.201700562