참고문헌
- E. J. Vinarcik: High integrity die casting processes, John Wiley & Sons, (2003) 7
- L. Wang, P. Turnley and G. Savage: J. Mater. Proc. Tech., "Gas content in high pressure die castings", 211 (2011) 1510-1515 https://doi.org/10.1016/j.jmatprotec.2011.03.024
- S. Otarawanna, H. I. Laukli, C. M. Gourlay and A. K. Dahle: Metal. Mater. Trans. A, "Feeding Mechanisms in High-Pressure Die Castings", 41A (2010) 1836-1846
- L. H. Wang: Inter. J. of Cast Metals Research, "Mathematical modelling of air evacuation in die casting process via CAST via and other venting devices", 20 (2007) 191-197 https://doi.org/10.1179/136404607X255061
- X. P. Niu, B. H. Hua, I. Pinwilla and H. Li: J. Mater. Proc. Tech, "Vacuum assisted high pressure die casting of aluminium alloys", 105 (2000) 119-127 https://doi.org/10.1016/S0924-0136(00)00545-8
- N. Iwamoto, Y. Kinoshita and S. Kodama: Trans. of Japan. Die Casting Congress, "The stable die cast product quality production system by controlling the gas pressure in a die cavity" JD96 (1996) 137-143
- K. Y. Kim: J. KFS, "Effect of evacuation variables on pressure change in the die cavity" 20 (2000) 181-187
- S. Kobayashi: Designing and manufacturing of die for die casting, The Nikkan Kogyo Shimbun, Ltd, (1993) 50
- S. Takeda and K.Sakamoto: Research Report 57 of JFS, "Relation between cross sectional area of gas vent and gas pressure in die cavity", (1990) 37-45
- M. Imran, R. Dhaliwal and S. H. Masood: Mater. Sci. Forum, "Thermal analysis of a bi-metallic chill vent for high pressure die casting", 654-656 (2010) 791-794
피인용 문헌
- Mould design for clutch housing parts using a casting simulation of high pressure die casting vol.17, pp.11, 2016, https://doi.org/10.1007/s12541-016-0178-6