References
- B. L. Mordike, and T. Ebert. "Magnesium Propertiesapplications- potentials", Mater Sci. Eng., Vol. A302, pp. 37-45, 2001. https://doi.org/10.1016/S0921-5093(00)01351-4
- R. Z. Valiev, and T. G. Langdon, "Principles of Equalchannel Angular Pressing as a Processing Tool for Grain Refinement", Progress in Materials Science, Vol. 51, No. 7, pp. 881-981, 2006. https://doi.org/10.1016/j.pmatsci.2006.02.003
- S. M. Masoudpanah, and R. Mahmudi "The Microstructure, Tensile, and Shear Deformation Behavior of an AZ31 Magnesium Alloy after Extrusion and Equal Channel Angular Pressing", Materials & Design, Vol. 31, No. 7, pp. 3512-3517, 2010. https://doi.org/10.1016/j.matdes.2010.02.018
- H. K. Kim, and W. J. Kim, "Microstructural Instability and Strength of an AZ31 Mg Alloy After Severe Plastic Deformation", Materials Science and Engineering A, Vol. 385, No. 1-2, pp. 300-308, 2004. https://doi.org/10.1016/S0921-5093(04)00882-2
- Y. Iwahashi, Z. Horita, M. Nemoto, and T. G. Langdon, "The Process of Grain Refinement in Equal-channel Angular Pressing", Acta Materialia, Vol. 46, No. 9, pp. 3317-3331, 1998. https://doi.org/10.1016/S1359-6454(97)00494-1
- W. J. Kim, S. I. Hong and Y. S. Kim, "Texture Development and its Effect on Mechanical Properties of an AZ61 Mg Alloy Fabricated by Equal Channel Angular Pressing", Acta Materialia, Vol. 51, No. 11, pp. 3293-3307, 2003. https://doi.org/10.1016/S1359-6454(03)00161-7
- A. Vinogradov, S. Nagasaki, V. Patlan, K. Kitagawa and M. Kawazoe, "Fatigue Properties of 5056 Al-Mg Alloy Produced by Equal-channel Angular Pressing", NanoStruct. Mater. Vol.11 No.7, pp. 925-934, 1999. https://doi.org/10.1016/S0965-9773(99)00392-X
- D. S. Dugdale, "Yielding of Steel Sheets Containing Slots", Journal of Mechanics and Physics of Solid, Vol. 8, pp. 100-104, 1960. https://doi.org/10.1016/0022-5096(60)90013-2