DOI QR코드

DOI QR Code

A State-of-the-Art Review on Debonding Failures of FRP Laminates Externally Adhered to Concrete

  • Kang, Thomas H.K. (Department of Architecture and Architectural Engineering, Seoul National University) ;
  • Howell, Joe (School of Civil Engineering and Environmental Science, University of Oklahoma) ;
  • Kim, Sang-Hee (Department of Architecture and Architectural Engineering, Seoul National University) ;
  • Lee, Dong-Joo (Department of Architecture and Architectural Engineering, Seoul National University)
  • 투고 : 2012.04.05
  • 심사 : 2012.05.31
  • 발행 : 2012.06.30

초록

There is significant concern in the engineering community regarding the safety and effectiveness of fiber-reinforced polymer (FRP) strengthening of RC structures because of the potential for brittle debonding failures. In this paper, previous research programs conducted by other researchers were reviewed in terms of the debonding failure of FRP laminates externally attached to concrete. This review article also discusses the influences on bond strength and failure modes as well as the existing experimental research and developed equations. Based on the review, several important conclusions were re-emphasized, including the finding that the bond transfer strength is proportional to the concrete compressive strength; that there is a certain bond development length that has to be exceeded; and that thinner adhesive layers in fact lower the chances of a concrete-adhesive interface failure. It is also found that there exist uncertainty and inaccuracy in the available models when compared with the experimental data and inconsistency among the models. This demonstrates the need for continuing research and compilation of data on the topic of FRP's bond strength.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. ACI Committee 440. (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R-08), July 2008. Farmington Hills, MI: American Concrete Institute.
  2. Arduini, M., & Nanni, A. (1997). Parametric study of beams with externally bonded FRP reinforcement. ACI Structural Journal, 94(5), 493-501.
  3. Arduini, M., Tommaso, A. D., & Nanni, A. (1997). Brittle failure in FRP plate and sheet bonded beams. ACI Structural Journal, 94(4), 363-370.
  4. Bakay, R., Sayed-Ahmed, E. Y., & Shrive, N. G. (2009). Interfacial debonding failure for reinforced concrete beams strengthened with carbon-fiber-reinforced polymer strips. Canadian Journal of Civil Engineering, 36, 103-121. https://doi.org/10.1139/L08-096
  5. Ben Ouezdou, M., Belarbi, A., & Bae, S.-W. (2009). Effective bond length of FRP sheets externally bonded to concrete. International Journal of Concrete Structures and Materials, 3(2), 127-131. https://doi.org/10.4334/IJCSM.2009.3.2.127
  6. Bizindavyi, L., & Neale, K. W. (1999). Transfer lengths and bond strengths for composites bonded to concrete. ASCE Journal of Composites for Construction, 3(4), 153-160. https://doi.org/10.1061/(ASCE)1090-0268(1999)3:4(153)
  7. Blaschko, M., Niedermeier, R., & Zilch, K. (1998). Bond failure modes of flexural members strengthened with FRP. In Proceedings of the Second International Conference on Composites in Infrastructure (Vol. 1, pp. 315-327), Tucson, Arizona, USA.
  8. Buyukozturk, O., Gunes, O., & Karaca, E. (2004). Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites. Construction and Building Materials, 18, 9-19. https://doi.org/10.1016/S0950-0618(03)00094-1
  9. Canadian Standards Association. (2002). Design and construction of building components with fiber-reinforced polymers, CSA S806-02. Rexdale, Ontario.
  10. Chajes, M. J., Finch, W. W, Jr, Januszke, T. F., & Thomson, T. A, Jr. (1996). Bond and force transfer of composite material plates bonded to concrete. ACI Structural Journal, 93(2), 208-217.
  11. Chaallal, O., Nollet, M.-J., & Perraton, D. (1998). Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic-plates: Design guidelines for shear and flexure. Canadian Journal of Civil Engineering, 25, 692-704. https://doi.org/10.1139/l98-008
  12. Chen, J. F., & Teng, J. G. (2001). Anchorage strength models for FRP and steel plates bonded to concrete. ASCE Journal of Structural Engineering, 127(7), 784-791. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(784)
  13. Chen, J. F., Yuan, H., & Teng, J. G. (2007). Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members. Engineering Structures, 29, 259-270. https://doi.org/10.1016/j.engstruct.2006.04.017
  14. CIDAR. (2006). Design guideline for RC structures retrofitted with FRP and metal plates: Beams and slabs. Draft 3, Submitted to Standards Australia, CIDAR/CBIR, Australia, 2006.
  15. El-Mihilmy, M. T., & Tedesco, J. W. (2001). Prediction of anchorage failure for reinforced concrete beams strengthened with fiber-reinforced polymer plates. ACI Structural Journal, 98(3), 301-314.
  16. Eurocode 8-3. (2004). Design of structures for earthquake resistance; part 3: Assessment and retrofitting of buildings. European Standard, EN 1998-3, Brussels, Belgium.
  17. FIB Task Group 9.3. (2001). Externally bonded FRP reinforcement for RC structures. Technical report, Fib bulletin 14, CEB-FIP, Lausanne, Switzerland.
  18. Harmon, T. G., Kim, Y. J., Kardos, J., Johnson, T., & Stark, A. (2003). Bond of surface-mounted fiber-reinforced polymer reinforcement for concrete structures. ACI Structural Journal, 100(5), 557-564.
  19. Hiroyuki, Y., & Wu, Z. (1997). Analysis of debonding fracture properties of cfs strengthened member subject to tension. In Proceedings of the third international symposium(FRPRCS-3), non-metallic (FRP) reinforcement for concrete structures (pp. 287-294). Sapporo, Japan: Japan Concrete Institute.
  20. Hosny, A. A., Sayed-Ahmed, Y., Abdelrahamm, A. A., & Alhlaby, N. A. (2006). Strengthening precast-prestressed hollow core slabs to resist negative moments using CFRP strips: An experimental investigation and a critical review of CSA 806-02. Canadian Journal of Civil Engineering, 33(8), 955-967. https://doi.org/10.1139/l06-040
  21. ISIS Canada. (2001). Strengthening reinforced concrete structures with externally-bonded fibre reinforced polymers (FRPs). ISIS Design Manual No. 4, Intelligent Sensing for Innovative Structures, Winnipeg, Canada.
  22. Italian Society Research Society. (2004). Instructions for the design, execution and control of strengthening measures through fibre-reinforced composites. CNR-DT 200/04. Rome, Italy.
  23. Japan Concrete Institute. (2003). International symposium on latest achievement of technology and research on retrofitting concrete structures. Proceedings and technical report on JCI Technical Committee, Sapporo, Japan, 2003 (in Japanese).
  24. Kanakubo, T., Furuta, T., & Fukuyama, H. (2003). Bond strength between fiber-reinforced polymer laminates and concrete. In Proceedings of 6th international RILEM symposium on non-metallic (FRP) reinforcement for concrete structures (FRPRCS-6) (pp. 134-143). Singapore: World Scientific.
  25. Khalifa, A., Gold, W. J., Nanni, A., & Aziz, A. (1998). Contribution of externally bonded FRP to shear capacity of RC flexural members. ASCE Journal of Composites for Construction, 2(4), 195-203. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(195)
  26. Maeda, T., Asano, Y., Sato, T., Ueda, T., & Kakuta, Y. (1997). A study on bond mechanism of carbon sheet. In Proceedings of the third international symposium (FRPRCS-3), nonmetallic (FRP) reinforcement for concrete structures (Vol. 1, pp. 279-286). Sapporo, Japan.
  27. Neubauer, U., & Rostasy, F. S. (1997). Design aspects of concrete structures strengthened with externally bonded CFRPplates. In Proceeding of the seventh international conference on structural faults and repair (Vol. 2, pp. 109-118). Scotland, Edinburgh: ECS.
  28. Plevris, N., Triantafillou, T. C., & Veneziano, D. (1995). Reliability of RC members strengthened with CFRP laminates. ASCE Journal of Structural Engineering, 121(7), 1037-1044. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:7(1037)
  29. Sato, Y., Kimura, K., & Kobatake, Y. (1997). Bond behavior between CFRP sheet and concrete (part 1). Journal of Structure and Construction Engineering of AIJ, 500, 75-82. (in Japanese).
  30. Sato, Y., Ueda, T., Kakuta, Y., & Tanaka, T. (1996). Shear reinforcing effect of carbon fibre sheet attached to side of reinforced concrete beams. In M. M. El-Badry (Ed.), Proceedings of 2nd international conference on advanced composite materials in bridges and structures (pp. 621-627). Montreal: Canadian Society for Civil Engineering.
  31. Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. II: Assessment of debonding strength models. Engineering Structures, 24, 397-417. https://doi.org/10.1016/S0141-0296(01)00106-7
  32. Taljsten, B. (1994). Plate bonding: Strengthening of existing concrete structures with epoxy bonded plates of steel or fibre reinforced plastics. Doctoral thesis, University of Technology, Sweden.
  33. Tanaka, T. (1996). Shear resisting mechanism of reinforced concrete beams with CFS as shear reinforcement. Graduation Thesis, Hokkaido University, Japan.
  34. Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2002). FRP strengthened RC structures. West Sussex: Wiley.
  35. Teng, J. G., Lu, X. Z., Ye, L. P., & Jiang, J. J. (2004). Recent research on intermediate crack induced debonding in FRPstrengthened RC beams. In Proceedings of the 4th international conference on advanced composite materials in bridges and structures. Calgary, Alberta, Canada.
  36. The Concrete Society. (2004). Design guidance for strengthening concrete structures using fibre composites materials (Technical report no. 55, 2nd edn.). Report of a Concrete Society Committee. Berkshire, UK: Concrete Society, CSTR- 55-UK.
  37. Van Gemert, D. (1980). Force transfer in epoxy-bonded steelconcrete joints. International Journal of Adhesion and Adhesives, 1, 67-72. https://doi.org/10.1016/0143-7496(80)90060-3
  38. Yang, D.-S., Hong, S.-N., & Park, S.-K. (2007). Experimental observation on bond slip behavior between concrete and CFRP Plate. International Journal of Concrete Structures and Materials, 1(1), 37-43. https://doi.org/10.4334/IJCSM.2007.1.1.037
  39. Yao, J., Teng, J. G., & Chen, J. F. (2005). Experimental study on FRP-to-concrete bonded joints. Composites: Part B, 36, 99-113. https://doi.org/10.1016/j.compositesb.2004.06.001
  40. Yuan, H., & Wu, Z. (1999). Interfacial fracture theory in structures strengthened with composite of continuous fiber. In Proceedings of symposium of China and Japan: Science and technology of 21st century (pp. 142-155) Tokyo, Japan.

피인용 문헌

  1. Seismic behavior evaluation of exterior beam-column joints with headed or hooked bars using nonlinear finite element analysis vol.7, pp.5, 2012, https://doi.org/10.12989/eas.2014.7.5.861
  2. Effect of Anchorage Number on Behavior of Reinforced Concrete Beams Strengthened with Glass Fiber Plates vol.9, pp.4, 2015, https://doi.org/10.1007/s40069-015-0116-5
  3. Experimental Study on Structural Degradation of CFRP Strengthened RC Beams Subjected to Weak Interfaces vol.10, pp.None, 2012, https://doi.org/10.2174/1874149501610010384
  4. Pull-out Strengths of GFRP-Concrete Bond Exposed to Applied Environmental Conditions vol.11, pp.1, 2012, https://doi.org/10.1007/s40069-016-0173-4
  5. Fatigue Assessment Model of Corroded RC Beams Strengthened with Prestressed CFRP Sheets vol.11, pp.2, 2012, https://doi.org/10.1007/s40069-017-0191-x
  6. Capacity estimation of FRP strengthened RC beam-column joints using hierarchy of strength assessment vol.16, pp.3, 2012, https://doi.org/10.1007/s10518-017-0251-2
  7. A review of test methods for studying the FRP-concrete interfacial bond behavior vol.169, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2018.02.163
  8. Experimental and numerical analyses of flexurally-strengthened concrete T-beams with stainless steel vol.172, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2018.06.077
  9. Flexural and Shear Strain Characteristics of Carbon Fiber Reinforced Polymer Composite Adhered to a Concrete Surface vol.11, pp.12, 2012, https://doi.org/10.3390/ma11122596
  10. Cracking Behavior of RC Beams Strengthened with Different Amounts and Layouts of CFRP vol.9, pp.5, 2012, https://doi.org/10.3390/app9051017
  11. Empirical FRP-Concrete Bond Strength Model for Externally Bonded Reinforcement on Grooves vol.23, pp.2, 2012, https://doi.org/10.1061/(asce)cc.1943-5614.0000924
  12. Experimental Evaluation of CFRP-Concrete Bond Behavior under High Loading Rates Using Particle Image Velocimetry Method vol.23, pp.3, 2012, https://doi.org/10.1061/(asce)cc.1943-5614.0000933
  13. Effect of the EBROG method on strip-to-concrete bond behavior vol.220, pp.None, 2019, https://doi.org/10.1016/j.conbuildmat.2019.06.065
  14. Plain Concrete Prisms Externally Strengthened by CFRP Bonded with Graphene Oxide-Modified Magnesium Phosphate Cement vol.32, pp.5, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0003134
  15. Strengthening RC Beams Using Stainless Steel Continuous Reinforcement Embedded at Ends vol.146, pp.5, 2012, https://doi.org/10.1061/(asce)st.1943-541x.0002606
  16. Closed-Form Solution Procedure for Simulating Debonding in FRP Strips Glued to a Generic Substrate Material vol.9, pp.4, 2021, https://doi.org/10.3390/fib9040022
  17. Bond Properties of Carbon Fiber Reinforced Polymer and Corrosion-Cracked Reinforced Concrete Interface: Experimental Test and Nonlinear Degenerate Interface Law vol.14, pp.18, 2012, https://doi.org/10.3390/ma14185333
  18. Low-Cycle Fatigue of FRP Strips Glued to a Quasi-Brittle Material vol.14, pp.24, 2012, https://doi.org/10.3390/ma14247753