DOI QR코드

DOI QR Code

A Design of MMIC Mixer for I/Q Demodulator of Non-contact Near Field Microwave Probing System

비접촉 마이크로웨이브 프루브 시스템의 I/Q Demodulator를 위한 MMIC Mixer의 설계

  • 류근관 (국립한밭대학교 전자.제어공학과) ;
  • 김성찬 (국립한밭대학교 전자.제어공학과)
  • Received : 2012.03.27
  • Accepted : 2012.04.25
  • Published : 2012.05.31

Abstract

A MMIC (Monolithic Microwave Integrated Circuit) mixer chip using the Schottky diode of an GaAs p-HEMT process has been developed for the I/Q demodulator of non-contact near field microwave probing system. A single balanced mixer type is adopted to achieve simple structure of the I/Q demodulator. A quadrature hybrid coupler and a quarter wavelength transmission line for 180 degree hybrid are realized with lumped elements of MIM capacitor and spiral inductor to reduce the mixer chip size. According to the on-wafer measurement, this MMIC mixer covers RF and LO frequencies of 1650MHz to 2050MHz with flat conversion loss. The MMIC mixer with miniature size of $2.5mm{\times}1.7mm$ demonstrates conversion loss below 12dB for both variations of RF and LO frequencies, LO-to-IF isolation above 43dB and RF-to-IF isolation above 23dB, respectively.

본 논문에서는 비접촉 마이크로웨이브 프루브 시스템의 I/Q demodulator를 위한 MMIC (Monolithic Microwave Integrated Circuit) mixer chip을 GaAs p-HEMT 공정의 Schottky 다이오드를 이용하여 설계 및 제작하였다. 프루브 시스템의 I/Q demodulator 구조를 단순화하기 위해 single balanced 구조의 mixer를 채택하였다. Single balanced mixer에서 $90^{\circ}$hybrid coupler와 ${\lambda}/4$ 전송선로를 이용하여 $180^{\circ}$hybrid를 설계하였으며 이를 MIM 커패시터와 spiral 인덕터를 이용하여 구현함으로써 mixer chip의 크기를 줄일 수 있었다. On-wafer 측정 결과, 본 논문의 MMIC mixer는 1650MHz ~ 2050MHz의 RF 및 LO 주파수 대역을 포함하고 있으며, 응용 주파수 대역 내에서 RF 및 LO의 변화에 대해 약 12dB 이하의 평탄한 변환손실(conversion loss) 특성을 나타내었다. 또한, MMIC mixer chip은 $2.5mm{\times}1.7mm$의 초소형 크기를 가지며 LO-IF 및 RF-IF의 격리도는 각각 43dB 및 23dB 이상의 특성을 나타내었다.

Keywords

References

  1. Jonathan D. Chisum, Mabel Ramirez, and Zoya Popovic, "Planar Circuits for Non-contact Near Field Microwave Probing," Proceedings of the 39th European Microwave Conference, pp. 802-805, September 2009.
  2. C.H. Lin, H.Z. Liu, C.K. Chu, H.K. Huang, C.C. Liu, C.H. Chang, C.L. Wu, C.S. Chang, and U.H. Wang, "A pHEMT Diode Single-balanced Mixer for K/K-band Application," Microwave and Optical Technology Letters, vol. 49, no. 11, pp. 2692-2694, November 2007. https://doi.org/10.1002/mop.22884
  3. V. Napijaro and V. Cozjocaro, "24GHz LTCC I/Q Mixer using Packaged HEMTs," Proceedings of the 3rd European Microwave Integrated Circuits Conference, pp. 454-458, October 2008.
  4. M. Sudow, K. Andersson, P.A. Nilsson, and N. Rorsman, "A Highly Linear Double Balanced Schottky Diode S-band Mixer," IEEE Microwave and Wireless Components Letters, vol. 16, no. 6, pp. 336-338, June 2006. https://doi.org/10.1109/LMWC.2006.875625
  5. Rowan Gilmore and Les Besser, Practical RF Circuit Design for Modern Wireless Systems, Artech House, Norwood MA, 2003.
  6. Stephen A. Mass, Microwave Mixer, Artech House, Norwood MA, 1992.
  7. TriQuint Design Guide, 2008.
  8. Y. Zhou and Y. Chen, "Lumped-element Equivalent Circuit Models for Distributed Microwave Directional Couplers," ICMMT 2008 Proceedings, 2008.