DOI QR코드

DOI QR Code

An inverse approach for the calculation of flexibility coefficient of open-side cracks in beam type structures

  • Fallah, N. (Civil Engineering Department, University of Guilan) ;
  • Mousavi, M. (Civil Engineering Department, University of Guilan)
  • Received : 2011.08.04
  • Accepted : 2012.01.03
  • Published : 2012.01.25

Abstract

An inverse approach is presented for calculating the flexibility coefficient of open-side cracks in the cross sectional of beams. The cracked cross section is treated as a massless rotational spring which connects two segments of the beam. Based on the Euler-Bernoulli beam theory, the differential equation governing the forced vibration of each segment of the beam is written. By using a mathematical manipulation the time dependent differential equations are transformed into the static substitutes. The crack characteristics are then introduced to the solution of the differential equations via the boundary conditions. By having the time history of transverse response of an arbitrary location along the beam, the flexibility coefficient of crack is calculated. The method is applied for some cracked beams with solid rectangular cross sections and the results obtained are compared with the available data in literature. The comparison indicates that the predictions of the proposed method are in good agreement with the reported data. The procedure is quite general so as to it can be applicable for both single-side crack and double-side crack analogously. Hence, it is also applied for some test beams with double-side cracks.

Keywords

References

  1. Ayatollahi, M.R., Hashemi R. and Rokhi H. (2010), "New formulation for vibration analysis of timoshenko beam with double-sided cracks", Struct. Eng. Mech., 34(4), 475-490. https://doi.org/10.12989/sem.2010.34.4.475
  2. Anderson, T.L. (1995), Fracture Mechanics: Fundamentals and Applications, CRC Press.
  3. Chen, W.H. and Wang, H.L. (1986), "Finite element analysis of axisymmetric cracked solid subjected to torsional loadings", Eng. Fract. Mech., 23, 705-717. https://doi.org/10.1016/0013-7944(86)90117-7
  4. Christides, S. and Barr, A.D.S. (1984), "One-dimensional theory of cracked Euler-Bernoulli beams", Int. J. Mech. Sci., 26, 639-648. https://doi.org/10.1016/0020-7403(84)90017-1
  5. Dimarogonas, A.D. (1996), "Vibration of cracked structures: a state of the art review", Eng. Fract. Mech., 55(5) 831-857.
  6. Friswell, M.I. and Penny, J.E.T. (2002), "Crack modeling for structural health monitoring", Struct. Hlth. Monit., 1(2), 139-148. https://doi.org/10.1177/1475921702001002002
  7. Gudmundson, P. (1983), "The dynamic behavior of slender structures with cross-sectional cracks", J. Mech. Phys. Solids, 31, 329-345. https://doi.org/10.1016/0022-5096(83)90003-0
  8. Jarczewska, K., Koszela, P., Sniady, P. and Korzec A. (2011), "Identification of the structure parameters using short-time non-stationary stochastic excitation", J. Sound Vib., 300, 3352-3367.
  9. Kirmsher, P.G. (1944), "The effect of discontinuities on the natural frequency of beams", Proc. Amer. Soc. Test. Mater., 44, 897-904.
  10. Krueger, R., Paris, I.L., O'Brien, T.K. and Minguet, P.J. (2002), "Comparison of 2D finite element modeling assumptions with results from 3D analysis for composite skin-stiffener debonding", Compos. Struct., 57, 161- 168. https://doi.org/10.1016/S0263-8223(02)00079-X
  11. Liebowitz, H., Vanderveldt, H. and Harris, D.W. (1967), "Carrying capacity of notched column", Int. J. Solids Struct., 3, 489-500. https://doi.org/10.1016/0020-7683(67)90003-0
  12. Liebowitz, H. and Claus, W.D. (1968), "Failure of notched columns", Eng. Fract. Mech., 1, 379-383. https://doi.org/10.1016/0013-7944(68)90010-6
  13. Langer, J. and Ruta P. (1995), "Dynamic identification of model's parameters of road and airfield pavements", Arch. Civil Eng., XLI(2), 115-136.
  14. Mahmoud, M.A. (2001), "Stress intensity factors for single and double edge cracks", Int. J. Fract., 111, 151- 161. https://doi.org/10.1023/A:1012288400397
  15. Narmashiri, K. and Jumaat, M.Z. (2011), "Reinforced steel I-beams: A comparison between 2D and 3D simulation", Simul. Model. Practice Theory, 19, 564-585. https://doi.org/10.1016/j.simpat.2010.08.012
  16. Okamura, H., Liu, H.W., Chu, C.S. and Liebowitz, H. (1969), "A cracked column under compression", Eng. Fract. Mech., 1, 547-564. https://doi.org/10.1016/0013-7944(69)90011-3
  17. Orhan, S. (2007), "Analysis of free and forced vibration of a cracked cantilever beam", NDT E. Int., 40, 443-450. https://doi.org/10.1016/j.ndteint.2007.01.010
  18. Rauch, A. (1985), "Shaft cracking supervision of heavy turbine rotors by FMM-method", Proceedings of the 3rd Modal Analysis Conference Union College New York, Orlando, U.S.A
  19. Rizos, P.F., Aspragatos, N. and Dimarogonas, A.D. (1990), "Identification of crack location and magnitude in a cantilever beam from the vibration modes", J. Sound Vib., 138, 381-388. https://doi.org/10.1016/0022-460X(90)90593-O
  20. Ruta, P. and Szyd o, A. (2005), "Drop-weight test based identification of elastic half-space model parameters", J. Sound Vib., 282, 411-427. https://doi.org/10.1016/j.jsv.2004.02.052
  21. Sieniawska, R., Sniady, P. and Zukowski, S. (2009), "Identification of the structure parameters applying a moving load", J. Sound Vib., 319, 355-365. https://doi.org/10.1016/j.jsv.2008.05.032
  22. Tada, H., Paris, P.C. and Irwin, G.R. (2000), The Stress Analysis of Cracks Handbook, ASME Press, New York, USA.
  23. Thomson, W.J. (1943), "Vibration of slender bars with discontinuities in stiffness", J. Appl. Mech., 17, 203-207.
  24. Zheng, D.Y. and Fan, S.C. (2003), "Vibration and stability of cracked hollow-sectional beams", J. Sound Vib., 267, 933-954. https://doi.org/10.1016/S0022-460X(02)01605-X

Cited by

  1. Effects of edge crack on the vibration characteristics of delaminated beams vol.53, pp.4, 2015, https://doi.org/10.12989/sem.2015.53.4.767
  2. An input–output damage detection method using static equivalent formulation of dynamic vibration vol.18, pp.2, 2018, https://doi.org/10.1016/j.acme.2017.01.007