DOI QR코드

DOI QR Code

극저온 추진제 상층부에서의 열전달계수 예측

Estimation of Heat Transfer Coefficient at the Upper Layer of Cryogenic Propellant

  • 권오성 (한국항공우주연구원 발사체추진제어팀) ;
  • 김병훈 (한국항공우주연구원 발사체추진제어팀) ;
  • 길경섭 (한국항공우주연구원 발사체추진제어팀) ;
  • 고영성 (충남대학교 항공우주공학과)
  • 투고 : 2011.11.28
  • 심사 : 2012.04.11
  • 발행 : 2012.06.01

초록

추진제탱크 내의 극저온 추진제는 발사체의 비행 과정동안 주변으로부터 에너지를 흡수하여 온도가 상승한다. 비행 종료 시점에 있어 터보펌프 입구 요구조건 이상으로 온도가 상승된 추진제는 사용할 수 없는 잔류추진제로 남게 된다. 본 논문에서는 극저온 추진제 상층부의 온도변화를 살펴보기 위하여 추진제 표면 근처에서의 열전달계수를 구해보고자 하였다. 추진제 상층부의 열전달을 전도로 단순화하여 열전달계수를 예측하는 방법을 제시하였다. 이를 통해 얻어진 추진제 상층부의 온도를 시험데이터와 비교하여 열전달계수 예측 방법의 적용 가능성을 확인하였다.

The temperature of cryogenic propellant in the propellant tank increases during flight due to heat input from surroundings. The propellant which temperature rises up over the required condition of turbo-pump remains as unusable propellant at the end of flight. In this paper the estimation method of the heat transfer coefficient at the upper layer of cryogenic propellant was presented. The heat transfer mode at the propellant upper layer was considered as conduction. Temperature distributions near propellant surface obtained from heat transfer coefficient were compared with test data to show the possibility of this method.

키워드

참고문헌

  1. Ring E., Rocket Propellant and Pressurization Systems, Prentice-Hall, Inc., Englewood Cliffs, N. J., 1964
  2. 조남경, 한상엽, 김영목, "액체로켓 추진기관에서의 극저온 추진제 탑재량 및 잔류량 예측기법," 한국추진공학회 추계학술대회논문집, 2005, pp.191-195
  3. 조남경, 정용갑, 김영목, 정상권, "추진제 탱크내의 액체산소 온도상승에 대한 해석적 고찰," 한국추진공학회지, 제9권, 제3호, 2005, pp.25-37
  4. 조남경, 정용갑, 한상엽, 김영목, 유진, "터보펌프 방식 액체추진기관에서의 액체산소 공급온도 예측에 대한 연구," 한국항공우주학회 추계학술발표회 논문집(I), 2005, pp.433-438
  5. William A. Olsen, "Experimental and Analytical Investigation of Interfacial Heat and Mass Transfer in a Pressurized Tank Containing Liquid Hydrogen," NASA TN D-3219, 1966
  6. N. K. Cho, O. S. Kwon, Y. M. Kim and S. K. Jeong, "Investigation of Helium Injection Cooling to Liquid Oxygen Propellant Chamber," Cryogenics, Vol. 46, Iss. 2-3, 2006, pp.132-142 https://doi.org/10.1016/j.cryogenics.2005.11.002
  7. M. E. Nein and J. F. Thompson, "Experimental and Analytical Studies of Cryogenic Propellant Tank Pressurant Requirements," NASA TN D-3177, 1966
  8. 권오성, 조남경, 조인현, "추진제탱크 얼리지 해석을 위한 기본모델," 항공우주기술, 제9권, 제1호, 2010, pp.125-132
  9. Epstein M. and Anderson R. E., "An Equation for the Prediction of Cryogenic Pressurant Requirements for Axisymmetric Propellant Tanks," Advances in Cryogenic Engineering, Vol. 13, 1968, pp.207-214
  10. William H. Roudebush, "An Analysis of the Problem of Tank Pressurization during Outflow," NASA TN D-2585, 1965
  11. A. F. Mills, Basic Heat and Mass Transfer, Richard D. Irwin, Inc., 1995
  12. 권오성, 김병훈, 조인현, 고영성, "가압가스온도에 따른 극저온 추진제탱크 가압가스 요구량," 한국항공우주학회지, 제38권, 제12호, 2010, pp.1202-1208

피인용 문헌

  1. Analysis on the Filling Mode of Propellant Supply System for the Korea Space Launch Vehicle vol.20, pp.4, 2016, https://doi.org/10.6108/KSPE.2016.20.4.050