Abstract
Until recently, most of GCS(Ground Control Software) has been required to visualize attitude, position, status of vehicle and to transmit control and mission commands for a single UAV(Unmanned Aerial Vehicle). However, the GCS needs to expand its functions to handle more complex situations. Simultaneous operation of multiple UAVs is emerging as a new practice. Hence, we set up requirements for operation of multiple UAVs and suggest the architecture of GCS that satisfy the requirements. In this study, we analyze the upper requirements and define the total structure of GCS at first. Then we design the inner structure for requirements in detail. Finally, we verify the functions of GCS on PILS(Processor In the Loop Simulation) System.
현재까지 대부분의 지상통제 소프트웨어는 단일 무인 항공기에 대한 자세, 위치, 상태의 수신 및 가시화와 항공기의 운용을 위한 조종 명령 및 임무 전송의 기능만 갖추고 있었다. 하지만 단일 무인기의 운용에서 다중 무인기의 운용으로 사용자의 요구가 확장됨에 따라 지상통제 소프트웨어도 다중 무인기의 운용을 위한 기능의 확장이 요구되고 있다. 본 연구에서는 다중 무인항공기의 운용을 위한 요구사항을 제시하고 이를 만족시키기 위한 지상통제 소프트웨어의 구조를 제안하였다. 우선, 제시된 상위 요구 성능을 분석하여 그에 따른 전체 구조를 정의하고, 이를 다시 세부 요구사항으로 설정하여 세부구조를 설계하였다. 마지막으로 PILS 환경에서 구성된 지상통제 소프트웨어의 기능을 검증하였다.