Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Seismic Performance Evaluation of Reinforced Concrete Columns by Applying Steel Fiber-Reinforced Mortar at Plastic Hinge Region

소성힌지부 강섬유 혼입 모르타르 적용 철근콘크리트 기둥의 내진성능평가

  • Received : 2011.09.22
  • Accepted : 2012.05.02
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a reinforced concrete composite column method in order to improve seismic performance of reinforced concrete column specimens by selectively applying steel fiber-reinforced mortars at the column plastic hinge region. In order to evaluate seismic improvement of the newly developed column method, a series of cyclic load test of column specimens under a constant axial load was investigated by manufacturing three specimens, two reinforced concrete composite columns by applying steel fiber-reinforced mortars at the column plastic hinge region and one conventional reinforced concrete column. Both concrete and steel fiber-reinforced mortar was cast-in placed type. From cyclic load test, it was found that the newly developed steel fiber-reinforced columns showed improved seismic performances than conventional reinforced concrete column in controlling bending and shear cracks as well as improving seismic lateral load-carrying capacities and lateral deformation capacities.

이 연구에서는, 철근콘크리트 기둥 실험체를 대상으로 기둥의 휨 위험 단면부에 국부적으로 강섬유 시멘트모르타르를 적용함으로서 기존 철근콘크리트 기둥에 비해 내진성능이 우수한 강섬유 모르타르 적용 철근콘크리트 복합기둥공법에 관해 제시하였다. 제시된 적용공법의 성능검증을 위하여 기존 철근콘크리트 기둥 1개 및 소성힌지구간에 국부적으로 강섬유 모르타르를 적용한 복합기둥 실험체 2개를 제작하여 일정 축하중 하에서 횡방향 반복하중을 받는 재하시험을 수행하였다. 콘크리트 및 강섬유 모르타르는 모두 현장타설되었다. 재하시험 결과 기존 철근콘크리트 기둥 실험체와 비교하여 강섬유 모르타르 적용 철근콘크리트 복합기둥 실험체의 경우 휨 및 전단 균열의 제어에 우수할 뿐만 아니라 기둥의 횡하중 내력 및 횡방향 변형 능력 향상에서도 우수한 것으로 평가되었다.

Keywords

References

  1. Kanda, T. and Li, V. C., "Interface Property and Apparent Strength of a High Strength Hydrophilic Fiber in Cement Matrix," Journal of Materials in Civil Engineering, Vol. 10, No. 1, 1998, pp. 5-13. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(5)
  2. 방진욱, 김정수, 이방연, 장영일, 김윤용, "하이브리드 섬유로 보강된 고강도 경량 시멘트 복합체의 개발," 한국복합재료학회 논문집, 23권, 4호, 2010, pp. 35-43.
  3. Priestley, M. J. N., Seible, F., and Calvi, G. M., Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, 1996, 686 pp.
  4. Cho, C. G., Kwon, M., and Spacone, E., "Analytical Model of Concrete-Filled Fiber-Reinforced Polymer Tubes based on Multiaxial Constitutive Laws," ASCE Journal of Structural Engineering, Vol. 131, No. 9, 2005, pp. 1426-1433. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:9(1426)
  5. 조창근, "FRP 콘크리트 복합구조 부재시스템의 휨 및 전 단거동예측," 대한건축학회 구조계 논문집, 20권, 8호, 2004, pp. 35-42.
  6. 정인규, 조창근, 박순응, "변위기반 설계법에 의한 RC 기둥의 Steel Jacket 보강 내진성능개선 설계법," 한국공간구조학회 논문집, 10권, 4호, 2010, pp. 49-57.
  7. ACI Committee 544, "Design Consideration for Steel Fiber Reinforced Concrete," Structural Journal, Vol. 85, No. 5, 1988, pp. 563-580.
  8. Swamy, R. N. and Bahia, H. M., "Effectiveness of Steel Fibers as Shear Reinforcement," Concrete International: Design and Construction, Vol. 7, No. 3, 1985, pp. 35-40.
  9. Li, V. C., "From Micromechanics to Structural Engineering- The Design of Cementitious Composites for Civil Engineering Applications," Journal of Structural Mechanics and Earthquake, Vol. 10, No. 2, 1993, pp. 37-48.
  10. Cho, C. G., Ha, G. J., and Kim, Y. Y., "Nonlinear Model of Reinforced Concrete Frames Retrofitted by In-Filled HPFRCC Walls," Structural Engineering and Mechanics, Vol. 30, No. 2, 2008, pp. 211-223. https://doi.org/10.12989/sem.2008.30.2.211
  11. 조창근, 김윤용, "섬유보강 고인성시멘트복합체패널의 2축 전단 비선형 모델," 한국전산구조공학회 논문집, 22 권, 6호, 2009, pp. 597-605.
  12. 조창근, 한병찬, 이정한, 김윤용, "압출성형 ECC 패널을 이용하여 제작된 복합바닥슬래브의 휨 거동," 콘크리트 학회 논문집, 22권, 5호, 2010, pp. 695-702. https://doi.org/10.4334/JKCI.2010.22.5.695
  13. Tang, J., Hu, C., Yang, K., and Yan, Y., "Seismic Behavior and Shear Strength of Framed Joint Using Steel-Fiber Reinforced Concrete," Journal of Structural Engineering, ASCE, Vol. 118, No. 2, 1992, pp. 341-358. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(341)
  14. Liu, C., "Seismic Behaviour of Beam-Column Joint Subassemblies Reinforced Concrete with Steel Fibers," Master's Thesis, University of Canterbury, New Zealand, 2006, 195 pp.
  15. ASTM C1018, Standard Test Methods for Flexural Toughness and First Crack Strength of Fiber Reinforced Concrete, ASTM, Vol. 4.02, 1997, pp. 634-637.

Cited by

  1. Experimental Study on Tension-Hardening and Softening Characteristics in Reinforced Mortar with CSA Expansion Agent vol.18, pp.1, 2014, https://doi.org/10.11112/jksmi.2014.18.1.101
  2. Evaluation of Mechanical Properties and Crack Resistant Performance in Concrete with Steel Fiber Reinforcement and CSA Expansive Admixture vol.18, pp.1, 2014, https://doi.org/10.11112/jksmi.2014.18.1.075
  3. Evaluation of Crack Resistant Performance in Cement Mortar with Steel Fiber and CSA Expansion Admixture vol.18, pp.3, 2014, https://doi.org/10.11112/jksmi.2014.18.3.125
  4. Applicability Evaluation and Development of High Strength Spacer with Plastic Fiber and Slag Cement vol.18, pp.4, 2014, https://doi.org/10.11112/jksmi.2014.18.4.092