DOI QR코드

DOI QR Code

초음파현미경을 이용한 오스테나이트 스테인레스강의 재료특성 평가

Evaluation of Material Properties in Austenite Stainless Steel Sheet with Scanning Acoustic Microscopy

  • 박태성 (서울과학기술대학교 기계공학과) ;
  • ;
  • 박익근 (서울과학기술대학교 기계공학과) ;
  • 김경석 (조선대학교 기계설계공학과) ;
  • 투고 : 2011.03.24
  • 심사 : 2011.12.23
  • 발행 : 2012.04.15

초록

Austenite stainless steel 304 has properties of high resistance to corrosion and temperature changes. Therefore, this material is widely used in various of industries. However, when the material is subjected to heating and cooling cycles the forming accuracy, for example, the right angle associated with a sharp bend such as corner is lost. This phenomenon is caused by the reversion of the deformation-induced martensite into austenite when the temperature in increased. This result in misfit of a structure or an assembly, and an increase in residual stress. Hence, it is important to understand this process. In this study, to evaluate the mechanical behavior of the deformation-induced martensite and reversed austenite, a scanning acoustic spectroscope including the capability of obtaining both phase and amplitude of the ultrasonic wave (i.e., the complex V(z) curve method) was used. Then, the velocities of the SAW propagating within the specimens made in different conditions were measured. The experimental differences of the SAW velocities obtained in this experiment were ranging from 2,750 m/s to 2,850 m/s, and the theoretical difference was 3.6% under the assumption that the SAW velocity was 2,800 m/s. The error became smaller as the martensite content was increased. Therefore, the SAW velocity may be a probe to estimate the marternsite content.

키워드

참고문헌

  1. Yoo, Y. T., Oh, Y. S., Ro, K. B., and Lim, K. G., 2003, "Comparison of Welding Characteristics of Austenitic 304 Stainless Steel and SM45C Using a Continuous Wave Nd:YAG Laser," Transaction of KSMTE, Vol. 12, No. 5, pp. 58-67.
  2. Mo, Y. W., Yoo, Y. T., Shin B. H., and Shin, H. H., 2005, "Welding Characteristics on Hear input Changing of Laser Dissimilar Metals Welding," Transaction of KSMTE, Vol. 15, No. 2, pp. 51-58.
  3. Kasuga, Y., 1996, "Change in Shape of a Cold Formed and Annealed Stainless Steel Sheet and Joining with use of this Change," J. of Materials Processing Technology, Vol. 60, No. 1, pp. 233-238. https://doi.org/10.1016/0924-0136(96)02335-7
  4. Atalar, A., Quate, C. F., and Wickramasinge, H. K., 1977, "Phase Imaging in Reflection with the Acoustic Microscope," Appl. Phys. Lett., Vol. 31, No. 12, pp. 791-793. https://doi.org/10.1063/1.89551
  5. Weglein, R. D., 1979, "A Model for Predicting Acoustic Materials Signatures," Appl. Phys. Lett., Vol 34, No. 3, pp. 179-181. https://doi.org/10.1063/1.90741
  6. Parmon, W., and Bertoni, H. L., 1979, "Ray Interpretation of the Material Signature in the Acoustic Microscope," Electron. Lett., Vol. 15, No. 21, pp. 684-686. https://doi.org/10.1049/el:19790486
  7. Atalar, A., 1978, "An Angular Spectrum Approach to Contrast in Reflection Acoustic Microscopy," J. Appl. Phys., Vol. 49, Issue 10, pp. 5130-5139. https://doi.org/10.1063/1.324460
  8. Kushibiki, J., Ueda, T., and Chubachi, N., 1987, "Determination of Elastic Constants by LFB Acoustic Microscope," IEEE Ultrasonics Symp. Proc., pp. 817-821.
  9. Nishida, M., and Endo, T., 1993, "Measurement of Elastic Moduli in Local Area by Scanning Acoustic Microscope," Proc. Experimental and Theoretical Mechanics, pp. 290-297.
  10. Okade, M., Mizuno, K., and Kawashima, K., 1995, "Measurement of Acoustoelasti Coefficients of Surface Wave with Scanning Acoustic Microscopy," Rev. Prog. Quant. Nondestr. Eval., Vol. 14, pp. 1883-1889.
  11. Okade, M., Hasebe, T., Kawai, T., and Kawashima, K., 1996, "New Digital Techniques for Precise Measurement of Surface Wave Velocity with Acoustic Microscope," Mater. Sci. Forum, Vol. 210-214, pp. 839-846.
  12. Obata, M., Shimada, H., and Mihara, T., 1990, "Stress Dependence of Leaky Surface Wave on PMMA by Line-Focus-Beam Acoustic Microscope," Exp. Mech., Vol. 30, No. 1, pp. 34-39. https://doi.org/10.1007/BF02322700
  13. Miyasaka, C., and Tittmann, B. R., 2005, "Acoustic Microscopy Applied to Ceramic Pressure Vessels and Associated Component," Transactions of the ASME, Vol. 127, pp. 214-219
  14. Miyasakam, C., Tittmannm, B. R., and Tanakam, S., 2002, "Characterization of Stress at a Ceramic/Metal Joined Interface by the V(z) Technique of Scanning Acoustic Microscopy," Pressure Vessel Technol, Vol. 124, No. 3, 336-342. https://doi.org/10.1115/1.1480824