References
- Mahbubur, R. M. D., Heikkala, J., Lappalainen, K., and Karjalainen, J. A., 1997, "Positioning Accuracy Improvement in Five-axis Milling by Post Processing," Int. J. Mach. T. & Manuf., Vol. 37, No. 2, pp. 223-236. https://doi.org/10.1016/0890-6955(95)00091-7
- Lamikiz, A., Lopez, L. N., Ocerin, O., Diez, D., and Maidagan, E., 2008, "The Denavit and Hartenberg Approach Applied to Evaluate the Consequences in the Tool Tip Position of Geometrical Errors in Five-Axis Milling Centres," Int. J. Adv. Manuf. Tech., Vol. 37, No. 1-2, pp. 122-139. https://doi.org/10.1007/s00170-007-0956-5
- Tsutsumi, M., and Saito, A., 2003, "Identification and Compensation of Systematic Deviations Particular to 5-axis Machining Centers," Int. J. Mach. T. & Manuf., Vol. 43, No. 8, pp. 771-780. https://doi.org/10.1016/S0890-6955(03)00053-1
- Lee, D. M., Zhu, Z. K., Lee, K. I., and Yang, S. H., 2011, "Identification and Measurement of Geometric Errors for a Five-axis Machine Tool with a Tilting Head using a Double Ball-bar," Int. J. Prec. Eng. & Manuf., Vol. 12, No. 2, pp. 337-343. https://doi.org/10.1007/s12541-011-0044-5
- Kiridena, V. S. B., and Ferreira, P. M., 1994, "Kinematic Modeling of Quasistatic Errors of Three-axis Machining Centers," Int. J. Mach. T. & Manuf., Vol. 34, No. 1, pp. 85-100. https://doi.org/10.1016/0890-6955(94)90042-6
- Kiridena, V. S. B., and Ferreira, P. M., 1994, "Parameter Estimation and Model Verification of First Order Quasistatic Error Model for Three-axis Machining Centers," Int. J. Mach. T. & Manuf., Vol. 34, No. 1, pp. 101-125. https://doi.org/10.1016/0890-6955(94)90043-4
- Ramesh, R., Mannan, M. A., and Poo, A. N., 2000, "Error Compensation in Machine Tools - A Review Part I: Geometric, Cutting-force Induced and Fixturedependent Errors," Int. J. Mach. T. & Manuf., Vol. 40, No. 9, pp. 1235-1256. https://doi.org/10.1016/S0890-6955(00)00009-2
- Yang, S. H., Yuan, J., and Ni, J., 1996, "Accuracy Enhancement of a Horizontal Machining Center by Real-time Error Compensation," J. Manuf. Sys., Vol. 12, No. 2, pp. 113-124.
- Lee, J. H., Liu, Y., and Yang, S. H., 2006, "Accuracy Improvement of Miniaturized Machine Tool: Geometric Error Modeling and Compensation," Int. J. Mac. T. & Manuf., Vol. 46, No. 12-13, pp. 1508-1516. https://doi.org/10.1016/j.ijmachtools.2005.09.004
- Yang, S. H., Kim, K. H., Park, Y. K., and Lee, S. G., 2004, "Error Analysis and Compensation for the Volumetric Errors of a Vertical Machining Centre using Hemispherical helix ball bar test," Int. J. Adv. Manuf. Tech., Vol. 23, No. 7-8, pp. 495-500. https://doi.org/10.1007/s00170-003-1662-6
- Lee, S. H., Seo, T. I., Cho, M. W., 2001, "On-machine Measurement Error Compensation using Ball-bar System," Trans. Korean. Soc. Mac. T. Eng., Vol. 10, No. 2, pp. 56-63.
- Okafor, A. C., and Ertekin, Y. M., 2000, "Derivation of Machine Tool Error Models and Error Compensation Procedure for Three Axes Vertical Machining Center using Rigid Body Kinematics," Int. J. Mach. T. & Manuf., Vol. 40, No. 8, pp. 1199-1213. https://doi.org/10.1016/S0890-6955(99)00105-4
- ISO, 1996, Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-load of Finishing Conditions, ISO 230-1:1996, International Organization for Standardization, Geneva.
- Suh, S. H., Lee, E. S., and Jung, S. Y., 1998, "Error Modeling and Measurement for the Rotary Table of Five-axis Machine Tools," Int. J. Adv. Manuf. Tech., Vol. 14, No. 9, pp. 656-663. https://doi.org/10.1007/BF01192286
- Zargarbashi, S. H. H., and Mayer, J. R. R., 2006, "Assessment of Machine Tool Trunnion Axis Motion Error, using Magnetic Double Ball Bar," Int. J. Mach. T. & Manuf., Vol. 46, No. 14, pp. 1823-1834. https://doi.org/10.1016/j.ijmachtools.2005.11.010
- Hong, C., Ibaraki, S., and Matsubara, A., 2011, "Influence of Position-dependent Geometric Errors of Rotary Axes on a Machining Test of Cone Frustum by Five-axis Machine Tools," Prec. Eng., Vol. 35, No. 1, pp. 1-11. https://doi.org/10.1016/j.precisioneng.2010.09.004
- ISO, 1996, Test Code for Machine Tools - Part 7: Geometric Accuracy of Axes of Rotation, ISO 230-7: 1996, International Organization for Standardization, Geneva.
- ISO, 1996, Test Code for Machine Tools - Part 2: Determination of Accuracy and Repeatability of Positioning Numerically Controlled Axes, ISO 230-2: 2006, International Organization for Standardization, Geneva.
- Lee, K. I., Lee, D. M., and Yang, S. H., 2012, "Parametric Modeling and Estimation of Geometric Errors for a Rotary Axis using Double Ball-Bar," Int. J. Adv. Manuf. Tech., DOI: 10.1007/s00170-011-3834-0. (in press)
Cited by
- The Research on Development and Performance of the Rotary bar Cutting tool vol.21, pp.6, 2012, https://doi.org/10.7735/ksmte.2012.21.6.926
- Estimation and Evaluation of Volumetric Position Errors for Multi-axis Machine Tools vol.23, pp.1, 2014, https://doi.org/10.7735/ksmte.2014.23.1.001