한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제21권2호
  • /
  • Pages.191-195
  • /
  • 2012
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

고투과율 광학유리(SF57HHT) 초정밀절삭의 실험적 연구

An Experimental Study of Ultra-precision Turning of High Transmittance Optical Glass(SF57HHT)

  • 김민재 (전남대학교 대학원 광공학협동과정) ;
  • 이준기 (전남대학교 대학원 신소재공학과) ;
  • 황연 (한국광기술원 초정밀광학연구센터) ;
  • 김혜정 (한국광기술원 초정밀광학연구센터) ;
  • 김정호 (한국광기술원 초정밀광학연구센터)
  • 투고 : 2011.10.21
  • 심사 : 2011.12.12
  • 발행 : 2012.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Heavy flint optical glass(SF57HHT) is new material that has extremely high transmittance. Due to brittleness and high hardness, optical glass is one of the most difficult to materials for ultra-precision turning. According to the hypothesis of ductile machining, all materials, regardless of their hardness and brittleness, will undergo transition from brittle to ductile machining region below critical undefromed chip thickness. In this study, cutting test was carried out to evaluate cutting performance of heavy flint glass using ultra-precision machine with single crystal diamond bite. The machined workpiece surface topography, tool wear and surface roughness were examined using AFM and SEM. The experimental results indicate that the machining mode become the brittle mode to ductile mode, when the maximum undeformed chip thinkness is large than critical value. Tool wear mainly occurs on the flank face and its wear mechanism is dominated by abrasion. This study demonstrates the feasibility of SF57HHT by diamond turning.

키워드

참고문헌

  1. Komanduri, R., Lucca, D. A., and Tani, Y., 1997, "Technological Advances in Fine Abrasive Processes," Keyonte paper. Annals of CIRP, Vol. 46, No. 2, pp. 545-596. https://doi.org/10.1016/S0007-8506(07)60880-4
  2. Venkatesh, V. C., Inasaki, I., Toenshof, H. K., Nakagawa, T., and Marinescu, I. D., 1995, "Observations on Polishing and Ultra-Precsion Machining of Semi-Conductor Materials," Keynote pater. Annals of CIRP, Vol. 44, No. 2, pp. 611-618. https://doi.org/10.1016/S0007-8506(07)60508-3
  3. Gee, A. E., Spragg, R. C., Puttick, K. E., and Rudman, M. R., 1991, "Single-Point Diamond Form-Finishing of Glass and Other Macroscopically Btittle Materials," SPIE, Vol. 1573, pp. 39-48.
  4. Fang, F. Z., and Venkatesh, V. C., 1998, "Diamond Cutting of Silicon with Nanometric Finish," Annals of CIRP, Vol. 47, No. 1, pp. 45-49. https://doi.org/10.1016/S0007-8506(07)62782-6
  5. Shimada, S., Inamura, T., Takezawa, N., Ohmori, H., Sata, T., and Ikawa, N., 1995, "Brittle-Dctile Transition Phenomena in Microindentation and Micromachninig," Annals of CIRP, Vol. 44, No. 2, pp. 523-526. https://doi.org/10.1016/S0007-8506(07)62377-4
  6. Lucca, D. A., Brinksmeier, E., and Goch, G., 1998, "Process in Assessing Surface and Subsurface Integrity," Annals of CIRP, Vol. 47, No. 2, pp. 669-694. https://doi.org/10.1016/S0007-8506(07)63248-X
  7. Blackley, W. S., and Scattergood, R. O., 1991, "Ductile Regime Model for Diamond Turning of Brittle Materials," Precis Eng, Vol. 13, No. 2, pp. 95-102. https://doi.org/10.1016/0141-6359(91)90500-I
  8. Jared, B. H., and Dow, T. A., 1997, "Chip Dynamics in Diamond Turning," Proc. ASPE, Vol. 16, pp. 230-233.
  9. Schinker, M. G., and Doll, W., 1987, "Turning of Optical Glass at Room Temperature," SPIE, Vol. 802, pp. 70-80.
  10. Fang, F. Z., and Chen, L., 2000, "Ultra-Precision Cutting of ZKN7 Glass," Annals of CIRP, Vol. 49, No. 1, pp. 17-20. https://doi.org/10.1016/S0007-8506(07)62887-X
  11. Puttick, K. E., Rudman, M. R., Smith, K. J., and Franks, A. L., 1989, "Single-Point Diamond Machining of Glass," Proc. R. Soc. Lond A., Vol. 426, pp. 19-30. https://doi.org/10.1098/rspa.1989.0116
  12. Brehm, R., Van Dun, K., Teuunissen, J. C. G., and Hasima, J., 1979, "Transparent Single-Point Turning of Optical Glass," Precis Eng., Vol. 1, No. 3, pp. 207-213. https://doi.org/10.1016/0141-6359(79)90101-6
  13. Moriwaki, T., Shamoto, E., and Inoue, K., 1992, "Ultra-precision Ductile Cutting of Glass by Applying Ultrasonic Vibration," Annals of CIRP, Vol. 41, No. 1, pp. 141-144. https://doi.org/10.1016/S0007-8506(07)61171-8
  14. Schinker, M. G., 1991, "Subsurface Damage Mechanisms at High-Speed Ductile Machining of Optical Glass," Precis Eng., Vol. 13, No. 3, pp. 208-218. https://doi.org/10.1016/0141-6359(91)90100-W
  15. Chiu, W., Endres, W. J., and Thouless, M. D., 2000, "An Experimental Study of Orthogonal Machining of Glass," Mach. Sci. Technol., Vol. 4, No. 2, pp. 253-275. https://doi.org/10.1080/10940340008945709
  16. Kim, M. J., Lee, J. K., Yeong, Y. G., Lee, H. S., Hwang, Y., Kim, H. J., and Kim, J. H., 2011, "An Experimental Study of Ultra-Precision Turning Optical Glass(BK7)," Journal of the KSMTE, Vol. 20, No. 4, pp. 382-385.
  17. Liu, K., 2002, Ductile Cutting for Rapid Prototyping of Tungsten Carbide Tool, A Thesis for a Doctorate, National University of Singapore, Singapore.
  18. Takeuchi, Y., Sawada, K., and Sata, T., 1996, "Ultra-Precision 3-D Micromachining of Glass," Annals of CIRP, Vol. 45, No. 1, pp. 401-404. https://doi.org/10.1016/S0007-8506(07)63090-X