References
- International Technology Roadmap for Semiconductors(ITRS) 2011 Ed. (Executive Summary), pp. 1-12 (2011)
- R. T. Howe, "Surface micromachining for microsensors and microactuators," J. Vac. Sci. Technol. B, Vol. 6, pp. 1809-1813 (1988) https://doi.org/10.1116/1.584158
- K. A. Shaw, Z. L. Zhang and N. C. MacDonald, "SCREAM 1: a single mask, single-crystal silicon, reactive ion etching process for microelectromechanical structures," Senc. Actuators A, Vol. 40, pp. 63-70 (1994) https://doi.org/10.1016/0924-4247(94)85031-3
- E. Bassous, "Fabrication of novel three-dimensional microstructures by anisotropic etching of (100) and (110) silicon," IEEE Trans. Electron Devices, Vol. ED-25, pp. 1178-1185 (1978)
- W. Bacher, W. Menz and l. Mohr, "The LIGA technique and its potential for microsystems-a survey," IEEE Trans. Electron, Vol. 42, pp. 431-441 (1995) https://doi.org/10.1109/41.464604
- E. W. Becker, W. Ehrfeld, P. Hagmann, A. Maner and D. Miinchmeyer, "Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography, galvanoforming, and plastic moulding (LIGA process)," Microelectron. Eng., Vol. 4, pp. 35-56 (1986) https://doi.org/10.1016/0167-9317(86)90004-3
- C. Chang, Y. F. Wang, Y. Kanamori, J. J. Shih, Y. Kawai, C. K. Lee, K. C. Wu and M. Esashi, "Etching submicrometer trenches by using the Bosch process and its application to the fabrication of antireflection structures," J. Micromech. Microeng., Vol. 15 pp. 580-585 (2005) https://doi.org/10.1088/0960-1317/15/3/020
- C. Ishiyama, J. Hata, S. Koyama, M. Sone and Y. Higo, "Development of evaluation method for delamination strength between micro-sized materials in MEMS devices," Mater. Res. Soc Symp. Proc., Boston, Massachusetts, USA, Vol. 977, pp. 228-233 (2006)
- C. Ishiyama, A. Shibata, M. Sone and Y. Higo, "Effect of Aspect ratio of micro-sized photoresist patterns on bond strength between a Si substrate with AFM fracture observation," Mater. Res. Soc Symp. Proc., Boston, Massachusetts, USA, Vol. 1139, pp. 71-76 (2009)
- C. Ishiyama, M. Sone and Y. Higo, "Development of new evaluation method for adhesive strength between microsized photoresist and Si substrate of MEMS devices," Key Engineering Materials, Vol. 345-346, pp. 1185-1188 (2007) https://doi.org/10.4028/www.scientific.net/KEM.345-346.1185
- C. Ishiyama, M. Sone and Y. Higo, "Effects of heat curing on adhesive strength between microsized SU-8 and Si substrate," Proc. of SPIE, Vol. 6533, pp. 65331F1-F8
- H. Lorenz, M. Despont, P. Vettiger and P. Renaud, "Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist," Microsyst. Technol., Vol. 4, pp. 143-146 (1998) https://doi.org/10.1007/s005420050118
- S. Bystrova, R. Luttge, and A. van den Berg, "Study of crack formation in high-aspect ratio SU-8 structures on silicon," Microelectro. Eng. Vol. 84, pp. 1113-1116 (2007) https://doi.org/10.1016/j.mee.2007.01.091