참고문헌
- Kampus, Z., 1999, "Analysis of Factors Influencing Accuracy in the Drawing of Round Rods," Journal of Materials Processing Technology, Vol. 87, pp. 90-96. https://doi.org/10.1016/S0924-0136(98)00336-7
- Akiyama, M., Taniyama, A., Neishi, Y. and Hamada, T., 2004, "Dimensional Change in High Carbon Steel Wire Owing to Heavy Reduction by Tandem Cold Drawing," Material Science and Technology, Vol. 20, pp. 903-908 https://doi.org/10.1179/026708304225019632
- Lee, Y. S., Lee, J. H., Kwon, Y. N. and Ishikawa, T., 2004, "Analysis of the Elastic Characteristics at Die and Workpiece to Improve the Dimensional Accuracy for Cold Forged Part," Journal of Materials Processing Technology, Vol. 153-154, pp. 1081-1088. https://doi.org/10.1016/j.jmatprotec.2004.04.291
- Ishikawa, T., Yukawa, N., Yoshida, Y., Kim, H. and Tozawa, Y., 2000, "Prediction of Dimensional Difference of Product from Tool in Cold Backward Etrusion," CRIP Annals-Manufacturing Technology, Vol. 49, pp. 169-172. https://doi.org/10.1016/S0007-8506(07)62921-7
- Luksza, J., Majta, J., Burdek, M. and Ruminski, M., 1998, "Modelling and Measurements of Mechanical Behavior in Multi-Pass Drawing Process," Journal of Materials Processing Technology, Vol. 80-81, pp. 398-405. https://doi.org/10.1016/S0924-0136(98)00119-8
- Camacho, A. M., Domingo, R., Rubio, E. and Gonza Vlez, C., 2005, "Analysis of the Influence of Back-Full in Drawing Process by the Finite Element Method," Journal of Materials Processing Technology, Vol. 164-165, pp. 1167-1174. https://doi.org/10.1016/j.jmatprotec.2005.02.130
- Dixit, U. S. and Dixit, P. M., 1995, "An Analysis of the Steady-State Wire Drawing of Strain-Hardening Materials," Journal of Materials Processing Technology, Vol. 47, pp. 201-229. https://doi.org/10.1016/0924-0136(95)85000-7
- Castro, A. L. R., Campos, H. B. and Cetlin, P. R., 1996, "Influence of Die Semi-Angle on Mechanical Properties of Single and Multiple Pass Drawn Copper," Journal of Materials Processing Technology, Vol. 60, pp. 179-182. https://doi.org/10.1016/0924-0136(96)02325-4
- Norasethasopon, S. and Yoshida, K., 2006, "Influences of Inclusion Shape and Size in Drawing of Copper Shaped-Wire," Journal of Materials Processing Technology, Vol. 172, pp. 400-406. https://doi.org/10.1016/j.jmatprotec.2005.09.020
- Chen, D. C. and Huang, J. Y., 2007, "Design of Brass Alloy Drawing Process Using Taguchi Method," Materials Science and Engineering: A, Vol. 464, pp. 135-140. https://doi.org/10.1016/j.msea.2007.01.139
- Vega, G., Haddi, A. and Imad, A., 2007, "Modelisation Numerique de Mise en Forme par Trefilage," 18e ( Congres Francais de Mecanique, Grenoble, pp. 27-31.
- Vega, G., Haddi, A. and Imad, A., 2009, "Temperature Effects on Wire-Drawing Process: Experimental Investigation," International Journal of Material Forming, Vol. 2, Suppl 1: pp. 229-232. https://doi.org/10.1007/s12289-009-0468-y
- Rigaut, J. M., Oudin, J., Bricout, J. P., Cabezon, J. and Ravalard, Y., 1998, "A New Friction Test Procedure for the Improvement of Drawing and Similar Processes," Journal of Materials Processing Technology, Vol. 21, pp. 3-28.
- Obi, A. I. and Oyinlola, A. K., 1996, "Frictional Characteristics of Fatty-Based Oils in Wire Drawing," Wear, Vol. 194, pp. 30-37. https://doi.org/10.1016/0043-1648(95)06664-0
- Evans, W. and Avitzur, B., 1968, "Measurement of Friction in Drawing, Extrusion and Rolling," Journal of Lubrication Technology, pp.72-89.
- Kim, B. M., Kim, T. H. and Choi. J. C., 1997, "Prediction of Die Wear in the Wire-Drawing Process," Journal of Materials Processing Technology, Vol. 65, pp. 11-17. https://doi.org/10.1016/S0924-0136(96)02235-2
- Gillstrom, P. and Jarl, M., 2007, "Wear of Die After Drawing of Pickled or Reverse Bent Wire Rod," Wear, Vol. 262, pp. 858-867. https://doi.org/10.1016/j.wear.2006.08.016
- Hollinger, S., Depraetere, E. and Giroux, O., 2003, "Wear Mechanism of Tungsten Carbide Dies During Wet Drawing of Steel Tyre Cords," Wear, Vol. 255, pp. 1291-1299. https://doi.org/10.1016/S0043-1648(03)00168-6
- Moon, C. and Kim, N., "Analysis of the Wire Drawing Process with Friction and Thermal Conditions Obtained by Inverse Engineering," Journal of Mechanical Science and Technology, (submitted).
- Kang, G. J., Kim, J. and Kang, B. S., 2008, "Numerical and Experimental Evaluation for Elastic Deformation of a Cold Forging Tool and Workpiece for a Sleeve Cam of an Automobile Start Motor," Journal of Engineering Manufacture, Vol. 222, pp. 217-224. https://doi.org/10.1243/09544054JEM929
피인용 문헌
- Dimensional Change in Drawn Wire Product in the Two Cross-Roll Straightening Process vol.37, pp.3, 2013, https://doi.org/10.3795/KSME-A.2013.37.3.295