수돗물 병입수 중 염소소독부산물 및 aldehyde의 발생 특성

Characteristics of Chlorination Byproducts and Aldehyde Occurrence in Bottled Tap Water

  • 이연희 (국립환경과학원 상하수도연구과) ;
  • 박주현 (국립환경과학원 상하수도연구과) ;
  • 김현구 (토양지하수연구과) ;
  • 안경희 (국립환경과학원 상하수도연구과) ;
  • 김태승 (토양지하수연구과) ;
  • 김동훈 (한강유역환경청 측정분석과) ;
  • 권오상 (국립환경과학원 상하수도연구과)
  • Lee, Youn-Hee (Drinking Water & Sewerage Research Division) ;
  • Park, Ju-Hyun (Drinking Water & Sewerage Research Division) ;
  • Kim, Hyun-Koo (Soil & Groundwater Research Division, National Institute of Environmental Research) ;
  • Ahn, Kyung-Hee (Drinking Water & Sewerage Research Division) ;
  • Kim, Tae-Seung (Soil & Groundwater Research Division, National Institute of Environmental Research) ;
  • Kim, Dong-Hoon (Monitoring and Analysis Division, Han River Basin Environmental Office) ;
  • Kwon, Oh-Sang (Drinking Water & Sewerage Research Division)
  • 발행 : 2012.09.30

초록

Several drinking water treatment plants (DWTPs) produce the bottled tap waters (BTWs) as pilot production and provide them for noncommercial use. In 2008, acetaldehyde and chloral hydrate were detected in some BTWs and the public worry over the safety of the water. In this study, the BTWs produced from 7 DWTPs were tested for 13 chemicals including disinfection byproducts (DBPs). The level of four trihalomethanes (THMs) were increased up to 15 days. The average concentration of them was 0.0075 mg/L at the time of bottling and it was increased to 0.0214 mg/L after 15 days. The average acetaldehyde concentration was 0.0406 mg/L at the time of bottling but it was went up to 0.2251 mg/L after 11 days and then decreased. Although the initial concentrations of DBPs were below the drinking water standard, we also traced them at different storage conditions. Temperature affected the formations of THMs and acetaldehyde concentrations significantly. While the average concentration of THMs ranged from 0.0113 to 0.0182 mg/L at $25^{\circ}C$, it was increased to 0.0132 ~ 0.0256 mg/L at $50^{\circ}C$. In case of acetaldehyde, concentration ranged from 0.0901 to 0.2251 mg/L at $25^{\circ}C$, it was increased to 0.3394 ~ 1.0591 mg/L at $50^{\circ}C$. Throughout the tests with 7 BTWs samples, none of the chemicals was exceeded the drinking water standard of Korea. Therefore, it is recommended to avoid the exposure of BTWs to sunlight or high temperature during distribution and storage.

키워드

참고문헌

  1. 김성준, 김종민, 전용태, 박종은, 원찬희(2010). D 정수처리장에서 소독부산물 발생 및 종분포 특성, 수질보전 한국물환경학회, 26(3), pp. 406-412.
  2. 김현구, 김태승, 박주현, 이재웅, 정원화, 박상정, 이연희, 권혁, 안경희, 안혜실(2009). 병입 수돗물의 적정 관리방안 연구, NIER NO. 2009-113-1169, 국립환경과학원, pp. 1, 21, 42.
  3. 신초롱, 손진식, 정창호, 한지희(2007). 국내 정수장 유출수 소독부산물(THMs와 HAAs)의 상관관계 연구, 대한상하수도학회.한국물환경학회 2007년 공동추계학술발표회논문집, 대한상하수도학회.한국물환경학회, pp. 202-208.
  4. 이강진, 홍지은, 표희수, 박송자, 유제강, 이대운(2003). 음용원수의 염소소독에 의한 소독부산물 생성패턴에 관한 연구, Analytical Science & Technology, 16(3), pp. 249-260.
  5. 이준배, 박주현, 이연희, 서경애, 안경희, 안혜실, 최자윤, 정원화, 박상정, 오정환, 장석재, 박지연, 김근수, 김지혜, 권오상, 김태승, 한진석(2010). 먹는물 병입에 따른 안전성 확보방안 연구, NIER NO. 2010-44-1219, 국립환경과학원, pp. 1.
  6. 정의민(2008). 식품용 polyethylene terephthalate(PET)병으로부터 생수로 이행된 유기화합물의 분석, 석사학위논문, 강릉대학교, pp. 1.
  7. 최일환, 정유진(2008). 기존수처리 공정 및 고도정수처리 공정에서 NOM의 분자크기 분포변화, 한국물환경학회, 24(6), pp. 682-689.
  8. Amy, G. L., Sierka, R. A., Bedessem, J., Price, D., and Tan, L. (1992). Molecular Size Distributions of Dissolved Organic Matter, Journal of American Water Works Association, 84(6), pp. 67-75. https://doi.org/10.1002/j.1551-8833.1992.tb07377.x
  9. Casajuana, N. and Lacorte, S. (2003). Presence and Release of Phthalic Esters and Other Endocrine Disrupting Compounds in Drinking Water, Chromatographia, 57, pp. 649-655. https://doi.org/10.1007/BF02491744
  10. Dong, M., DiEdwardo, AH., and Zitomer, F. (1980). Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottles, Journal of Chromatographic Science, 18, pp. 242-246. https://doi.org/10.1093/chromsci/18.5.242
  11. Duflos, J., Leroy, C., Gervais, B., Dupas, G., Bourguignon, J., and Queguiner, G. (1993). Analysis of Residual Acetaldehyde and Formaldehyde in PET via HPLC, Analusis, 21, pp. 313-317.
  12. Elisabetta, C., C, Z., Ilaria, Z., Licia, G., Mauro, S., Vanda, B., Francesco, D., Silvano, M., and Donatella, F. (2010). Comparative Assessment of Genotoxicity of Mineral Water Packed in Polyethylene Terephthalate (PET) and Glass Bottles, Water Research, 44, pp. 1462-1470. https://doi.org/10.1016/j.watres.2009.10.030
  13. Ewender, J., Franz, R., Mauer, A., and Welle, F. (2003). Determination of the Migration of Acetaldehyde from PET Bottles into Noncarbonated and Carbonated Mineral Water, Deutsche Lebensmittel-Rundschau, 99, pp. 215-221.
  14. Gibbons, J. and Laha, S. (1999). Water Purification Systems: A Comparative Analysis based on the Occurrence of Disinfection By-Products, Environmental Pollution, 106, pp. 425-428. https://doi.org/10.1016/S0269-7491(99)00097-4
  15. Hoekstra, E. G., De-Leer, E. W. B., and Brinkman, U. A. T. (1998). Natural Formation of Chloroform and Brominated Trihalomethanes in Soil, Environmental Science Technology, 32, pp. 3724-3729. https://doi.org/10.1021/es980127c
  16. IARC (2009). http://www.iarc.fr/.
  17. Kilduff, J. E., Karanfil, T., Chin, Y. P., and Weber, W. J. Jr. (1996). Adsorption of Natural Organic Polyelectrolytes by Activated Carbon: A Size-Exclusion Chromatography Study, Environmental Science & Technology, 30, pp. 1336-1343. https://doi.org/10.1021/es950547r
  18. Kohler, M. and Wolfensberger, M. (2003). Migration of Organic Components from Poly Ethylene Terephthalate (PET) Bottles to Water, Report 429670. EMPA, Swiss Federal Laboratories for Materials Testing and Research, pp. 6-9.
  19. Linssen, J., Reitsma, H., and Cozijnsen, J. (1995). Static Headspace Gas Chromatography of Acetaldehyde in Aqueous Foods and Polyethylene Terephthalate, Zeitschrift fur Lebensmitteluntersuchung und-Forschung, 201, pp. 253-255. https://doi.org/10.1007/BF01192998
  20. Montuori, P., Jover, E., Morgantini, M., Bayona, J. M., and Triassi, M. (2008). Assessing Human Exposure to Phthalic Acid and Phthalate Esters from Mineral Water stored in Polyethylene Terephthalate and Glass Bottles, Food Additives and Contaminants, 25(4), pp. 511-518. https://doi.org/10.1080/02652030701551800
  21. Mutsuga, M., Kawamura, Y., Sugita-Konishi, Y., Hara-Kudo, Y., Takatori, K. and Tanamoto, K. (2006). Migration of Formaldehyde and Acetaldehyde into Mineral Water in Polyethylene Terephthalate (PET) Bottles, Food Additives and Contaminants, 23(2), pp. 212-218. https://doi.org/10.1080/02652030500398361
  22. Nawrocki, J., Dabrowska, A., and Borcz, A. (2002). Investigation of Carbonyl Compounds in Bottled Waters from Poland, Water Research, 36(19), pp. 4893-4901. https://doi.org/10.1016/S0043-1354(02)00201-4
  23. Page, B. C., Conacher, H. B., Salminen, J., Nixon, G. R., Riedel, G., Mori, B., Gagnon, J., and Brousseau, Y. (1993). Survey of Bottled Drinking Water Sold in Canada. Part 2. Selected Volatile Organic Compounds, Journal of AOAC INTERNATIONAL, 76(1), pp. 26-31.
  24. Sugaya, N., Nakagawa, T., Sakurai, K., Morita, M., and Onodera, S. (2001). Analysis of Aldehydes in Water by Head Space-GC/MS, Journal of Health Science, 47, pp. 21-27. https://doi.org/10.1248/jhs.47.21
  25. Villain, F., Coudane, J., and Vert, M. (1995). Thermal Degradation of Polyethylene Terephthalate: Study of Polymer Stabilization, Polymer Degradation and Stability, 49, pp. 393-397. https://doi.org/10.1016/0141-3910(95)00121-2