한국입자에어로졸학회지 (Particle and aerosol research)

  • 제8권1호
  • /
  • Pages.37-43
  • /
  • 2012
  • /
  • 1738-8716(pISSN)
  • /
  • 2287-8130(eISSN)
한국입자에어로졸학회 (Korean Association for Particle and Aerosol Research)
권호 표지

용액 내 스파크 방전을 이용한 나노입자 제조 및 특성 평가

Formation of Nanoparticles by Spark Discharge in Liquid

  • 최후미 (성균관대학교 나노과학기술협동학부) ;
  • 김장아 (성균관대학교 나노과학기술협동학부) ;
  • 정승교 (서울대학교 기계항공공학부) ;
  • 윤주호 (서울대학교 전기공학부) ;
  • 김태성 (성균관대학교 나노과학기술협동학부)
  • Choi, Hoomi (SKKU Advanced Institute of Nanotechnology(SAINT), Sungkyunkwan University) ;
  • Kim, Jangah (SKKU Advanced Institute of Nanotechnology(SAINT), Sungkyunkwan University) ;
  • Jung, Seungkyo (School of Mechanical and Aerospace Engineering) ;
  • Yoon, Juho (Department of Electrical Engineering) ;
  • Kim, Taesung (SKKU Advanced Institute of Nanotechnology(SAINT), Sungkyunkwan University)
  • 발행 : 2012.03.31
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, we designed a 'spark in liquid' system. The spark discharge between two electrodes were used to generate particles by using sufficient temperature to evaporate a part of electrodes. The power supply system provides a continuous spark discharge by discharging of the capacitor to ionize the electrodes in liquid. The DC spark discharge system operates with 1-10 kV voltage. Processed copper and graphite rods were used to both electrodes with 1-3 mm diameter. There are several variables which can control the particle size and concentration such as gap distance between electrodes, applied voltage, operating liquid temperature, electrode type and liquid type. So we controlled these variables to confirm the change of particle size distribution and concentration of particles contained in liquid as wt%. 'spark in liquid' system is expected to apply nanoink by control of concentration with analysis of characteristics.

키워드

참고문헌

  1. Kim, H. S., Dhage, S. R., Shim, D. E., Hahn, H. T.(2009). Intense pulsed light sintering of copper nanoink for printed electronics, Appled Physics A, 97, 791-798. https://doi.org/10.1007/s00339-009-5360-6
  2. Tabrizi, N. S., Ullmann, M., & et al.(2009). Generation of nanoparticles by spark discharge, J. Nanoparticle Research, 11(2), 315-332. https://doi.org/10.1007/s11051-008-9407-y
  3. Kim, J. T., & Chang, J. S.(2005). Generation of metal oxide aerosol particles by a pulsed spark discharge technique, J. Electrostatics, 63, 911-916. https://doi.org/10.1016/j.elstat.2005.03.066
  4. Harvath, H., & Gangl. M.(2003). A low-voltage spark generator for production of carbon particles, J. Aerosol Science, 34, 1581-1588. https://doi.org/10.1016/S0021-8502(03)00193-9
  5. Byeon, J. H., Park, J. H., & Hwang, J. H.(2008). Spark generation of monometallic and bimetallic aerosol nanoparticles, J. Aerosol Science, 39, 888-896. https://doi.org/10.1016/j.jaerosci.2008.05.006
  6. Lee, B., Kim, Y., Yang, S., Jeong, I., Moon, J.(2008). A low-cure-temperature copper nano ink for highly conductive printed electrodes, Current Applied Physics, 9, e157-e160.
  7. Greer, J. R., Street, R. A.(2007). Thermal cure effects on electrical performance of nanoparticle silver inks, Acta Materiallia, 55, 6345-6349. https://doi.org/10.1016/j.actamat.2007.07.040