참고문헌
- Liu, X., Devor, R. E., Kapoor, S. G. and Ehmann, K. F., "The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science", Journal of Manufacturing Science and Engineering, Vol. 126, pp. 666-678, 2004.
- Dornfeld, D., Min, S. and Takeuchi, Y., "Recent Advances in Mechanical Micromachining", Annals of the CIRP, Vol. 55, pp. 745-768, 2006.
- Novakov, T. and Jacson, M. J., "Chatter problems in micro- and macrocutting operations, existing models, and influential parameters-a review", The International Journal of Advanced Manufacturing Technology, Vol. 47, pp. 597-620, 2010.
- Bissacco, G., Hansen, H. N. and Slunsky, J., "Modelling the cutting edge radius size effect for force prediction in micro milling", CIRP Annals - Manufacturing Technology, Vol. 57, pp. 113-116, 2008.
- Mian, A. J, Driver, N. and Mativenga, P.T., "Identification of factors that dominate size effect in micro-machining", International Journal of Machine Tools & Manufacture, Vol. 51, pp. 383-394, 2011.
- Lai, X., Li, H., Li, C., Lin, Z. and Ni, J., "Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 1-14, 2008.
- Yun, H. T., Heo, S., Lee, M. K., Min, B.-K. and Lee, S. J., "Ploughing detection in micromilling Processes using the cutting force signal", International Journal of Machine Tools & Manufacture, Vol. 51, pp. 377-382, 2011.
- Jin, X. and Altintas, Y., "Slip-line field model of micro-cutting process with round tool edge effect", Journal of Materials Processing Technology, Vol. 211, pp. 339-355, 2011.
- Altintas, Y. and Jin, X., "Mechanics of micro-milling with round edge tools", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 77-80, 2011.
- Lee, H. U., Cho, D.-W. and Ehmann, K. F., "A mechanistic model of cutting forces in micro- end-milling with cutting-condition-independent cutting force coefficients", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 031102, 2008.
- Park, S. S. and Malekian, M., "Mechanistic modeling and accurate measurement of micro end milling forces", CIRP Annals - Manufacturing Technology, Vol. 58, pp. 49-52, 2009.
- Malekian, M., Park, S. S. and Jun, M. B. G., "Modeling of dynamic micro-milling cutting forces", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 586-598, 2009.
- Salahshoor, M. and Ahmadian, H., "Continuous model for analytical prediction of chatter of milling", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 1136-1143, 2009.
- Mascardelli, B. A., Park, S. S. and Freiheit, T., "Substructure coupling of microend mills to aid in the suppression of chatter", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 011010, 2008.
- Pfefferkorna, F. E., Lei, S., Jeon, Y. and Haddad, G., "A metric for defining the energy efficiency of thermally assisted machining", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 357-365, 2009.
- Shelton, J. A. and Shin, Y. C., "Experimental Evaluation of Laser-Assisted Micromilling in a Slotting Configuration", Journal of Manufacturing Science and Engineering, Vol. 132, pp. 021008, 2010.
- Jeon, Y. and Pfefferkorn, F., "Effect of Laser Preheating the Workpiece on Micro end Milling of Metals", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 011004, 2008.
- Melkote, S., Kumar, M., Hashimoto, F. and Lahoti, G., materials", CIRP Annals - Manufacturing Technology, Vol. 58 pp. 45-48, 2009.
- Ding, H., Ibrahim, R., Cheng, K. and Chen, S. -J., "Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 1115-1118, 2010.
- Marcon, A., Melkote, S., Kalaitzidou, K. and DeBra, D., "An experimental evaluation of graphite nanoplatelet based lubricant in micro-milling", CIRP Annals - Manufacturing Technology, Vol. 59, pp. 141-144, 2010.
- Jun, M. B. G., Joshi, S. S., Devor, R. E. and Kapoor, S. G., "An experimental evaluation of an atomization-based cutting fluid application system for micromachining", Journal of Manufacturing Science and Engineering, Vol. 130, pp. 031118, 2008.
- Brecher, C., Utsch, P., Klar, R. and Wenzel, C., "Compact design for high precision machine tools", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 328-334, 2010.
- Huo, D., Cheng, K. and Wardle, F., "A holistic integrated dynamic design and modelling approach applied to the development of ultraprecision micro-milling machines", International Journal of Machine Tools & Manufacture, Vol. 50, pp. 335-343, 2010.
- Zaeh, M. and Siedl, D., "A new method for simulation of machining performance by integrating finite element and multi-body simulation for machine tools", CIRP Annals - Manufacturing Technology, Vol. 56, pp. 383-386, 2007.
- Aramcharoen, A., Mativenga, P. T., Yang, S., Cooke, K. E. and Teer, D. G., "Evaluation and selection of hard coatings for micro milling of hardened tool steel", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 1578-1584, 2008.
- Torres, C. D., Heaney, P. J., Sumant, A. V., Hamilton, M. A., Carpick, R. W. and Pfefferkorn, F. E., "Analyzing the performance of diamond-coated micro end mills", International Journal of Machine Tools & Manufacture, Vol. 49, pp. 599-612, 2009.
- Ozel, T., Thepsonthi, T., Ulutan, D. and Kaftanoglu, B., "Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 85-88, 2011
- Filiz, S., Xie, L., Weiss, L. E. and Ozdoganlar, O. B., "Micromilling of microbarbs for medical implants", International Journal of Machine Tools & Manufacture, Vol. 48, pp. 459-472, 2008.
- Nakamoto, K., Ishida, T., Kitamura, N. and Takeuchi, Y., "Fabrication of microinducer by 5-axis control ultraprecision micromilling", CIRP Annals - Manufacturing Technology, Vol. 60, pp. 407-410, 2011.