DOI QR코드

DOI QR Code

Induction Motors Performance Study under Various Voltage Sags Using Simulation

  • Ojaghi, Mansour (Dept. of Electrical Engineering, University of Zanjan) ;
  • Faiz, Jawad (School of Electrical and Computer Engineering, University of Tehran) ;
  • Shahrouzi, Hamid (Dept. of Electrical Engineering, University of Zanjan) ;
  • Alimohammadi, Sahar (Department of Electrical Engineering, Zanjan Azad University)
  • Received : 2012.02.29
  • Accepted : 2012.08.01
  • Published : 2012.09.01

Abstract

The main aim of this paper is to study effects of different voltage sags and their intensity on the behavior of induction motors using a simulation approach. For this purpose, necessary simulation was done in Matlab - Simulink first. Then, to ensure-reasonable accuracy of the simulation, some results of the simulation were compared with the corresponding results measured in the laboratory. Then effects of intensity of symmetric voltage sag (three phase) and its starting point on the behavior of small and large induction motors was studied using simulation and subsequently, the effects of asymmetric voltage sags (single phase and two phase) has also been studied and finally the conclusion of the study was presented.

Keywords

References

  1. G. T. Heydt, Electric Power Quality, Scottsdale, AZ: Starts in a Circle, 1991.
  2. C. Sankaran, Power Quality, CRS PRESS, Washington, D.C., 2007.
  3. Lan K.p.Ross, Omniverter Inc, " Voltage Sags: an Explanation, Cause, Effects and Correction-Part1," November 2007.
  4. D. S. Dorr, M. B. Hughes, T. M. Gruzs, R. E. Jurewicz, and J. L. Mc-Claine, "Interpreting Recent Power Quality Surveys to Define the Electrical Environment," vol. 33, pp. 1480-1487, Nov./Dec. 1997. https://doi.org/10.1109/28.649959
  5. E. W. Gunther and H. Mehta, "A Survey of Distribution System Power Quality - Preliminary Results, ", vol. 10, pp. 322-329, Jan. 1995. https://doi.org/10.1109/61.368382
  6. L. Tang, J. Lamoree, M. McGranagham, and H. Mehta, "Distribution System Voltage Sags: Interaction with Motor and Drive Loads," in Chicago, IL, 1994
  7. G. S. Grewal, "Transient Motor Reacceleration Study in an Integrated Petrochemical Facility," IEEE Trans. Industry Applicat., vol. 35, pp. 968-977, July/Aug. 1999. https://doi.org/10.1109/28.777207
  8. M. H. J. Bollen, "The Influence of Motor Reacceleration on Voltage Sags," vol. 31, pp. 667-674, July/Aug. 1995. https://doi.org/10.1109/28.395271
  9. J. C. Gomez, "Behavior of Induction Motor Due to Voltage Sags and Short Interruptions," vol. 17, no. 2, pp.434-440, April 2002. https://doi.org/10.1109/61.997914
  10. P. C. Krause, Analysis of Electric Machinary, McGraw Hill,1991.