한국의류학회지 (Journal of the Korean Society of Clothing and Textiles)

  • 제36권4호
  • /
  • Pages.443-455
  • /
  • 2012
  • /
  • 1225-1151(pISSN)
  • /
  • 2234-0793(eISSN)
한국의류학회 (The Korean Society of Clothing and Textiles)
권호 표지
DOI QR코드

DOI QR Code

여성용 바지 패턴 설계를 위한 3차원 밀착 패턴 여유량 부가와 레플리카 조합 방법

Methods of Merging a 3D Replica and Ease Distribution for Woman's Pant Patterns

  • Wu, Yanjun (Dept. of Clothing & Textiles, Chungnam National University) ;
  • Hong, Kyung-Hi (Dept. of Clothing & Textiles, Chungnam National University)
  • 투고 : 2012.01.16
  • 심사 : 2012.03.29
  • 발행 : 2012.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

키워드

참고문헌

  1. Choi, J. Y. (2011). Engineering design of 3D tight-fit garment using skin surface mapping based on the skin deformation of lower body. Unpublished master's thesis, Chungnam University, Daejeon.
  2. Jeong, Y. H., & Hong, K. H. (2010). Development of 2D pattern for cycling pants using 3D data of human movement and stretch fabric. Korean Journal of Human Ecology, 19(3), 555-563. https://doi.org/10.5934/KJHE.2010.19.3.555
  3. Kam, W. Y. (2005). A study of pattern development for women's low-waisted slacks design. Unpublished master's thesis, University of Ulsan, Ulsan.
  4. Kang, S. H., & Suh, M. A. (2002). 의복의 입체구성 [Practical clothing construction]. Seoul: Kyomunsa.
  5. Kang, W. B. (2004). A study of block pattern utilized by women's apparel manufacturers-Centering on slacks pattern for women in their 20s-30s-. Unpublished master's thesis, Yonsei University, Seoul.
  6. Kim, S. Y., Lee, Y. J., & Park, H. J. (2008). Basic pattern development of haptic gloves from 3D data. Journal of the Korean Society of Clothing and Textiles, 32(8), 1226-1232. https://doi.org/10.5850/JKSCT.2008.32.8.1226
  7. Kim, S. Y. (2009). Establishing quantitative evaluation standards for slacks fit. Unpublished doctoral dissertation, Seoul National University, Seoul.
  8. Kim, Y. K. (2006). A study of the visual effects and functional effect by variations in location of the waist line of slacks. Unpublished master's thesis, Kyungsung University, Busan.
  9. Lee, H. R. (2004). Development of a fitted bodice pattern using 3D replicas of women's upper body. Unpublished master's thesis, Chungnam National University, Daejeon.
  10. Nagazawa, S. (1999). 의복과 체형 [Clothing and body shape]. Seoul: Yehaksa.
  11. Nam, Y. J. (2005, November 26). 3차원 형상 자료를 이용한 2차원 평면 pattern 제도법 개발 [2D pattern development using 3D scan data]. Ministry of Commerce, Industry and Energy. Retrived October 20, 2011, from http://sizekorea.kats.go.kr
  12. Rim, W. J. (1995). 의복구성학 [Clothing construction]. Seoul: Kyomunsa.
  13. Shin, D. O., Ryu, S. N., & Park, K. S. (2006). The design of slacks pattern for women in early twenties. The Research Journal of the Costume Culture, 14(5), 699-714.
  14. Sohn, B. H. (2008). Development of men slacks pattern using 3D scan data. Journal of the Korean Home Economics Association, 46(9), 137-146.
  15. Yang, S. H. (2008). A study on the pattern of slacks according to the hip form of middle-aged women. Unpublished master's thesis, Konkuk University, Seoul.
  16. Yoon, M. K. (2008). A study on the pattern design for mass customization according to the study of women's pants using 3D body scan data. Unpublished doctoral dissertation, Seoul National University, Seoul.
  17. Yu, H. S. (2008). A study on designing pattern of new industrial slacks for women-Focused on domestic brands targeted at women in their 20s'-. Unpublished master's thesis, Sungshin Women's University, Seoul.

피인용 문헌

  1. Development of 3D patterns for functional outdoor pants based on skin length deformation during movement vol.29, pp.2, 2017, https://doi.org/10.1108/IJCST-08-2016-0090
  2. Methods to determine the size of pant patterns with curved design lines and their three dimensional construction using 3D virtual fitting vol.20, pp.4, 2016, https://doi.org/10.12940/jfb.2016.20.4.153
  3. Identification of the Relationship between Surface Variations of Lower Body Parts by Movement Using 3D Scan Data : A Focus on Women Aged 20 to 24 Years vol.67, pp.3, 2017, https://doi.org/10.7233/jksc.2017.67.3.081
  4. Analysis of Neck Fit-zone according to Body Type for Females in Their 60s vol.20, pp.4, 2018, https://doi.org/10.5805/SFTI.2018.20.4.429