DOI QR코드

DOI QR Code

Numerical crack modelling of tied concrete columns under compression

  • Bosco, C. (Dipartimento di Ingegneria Strutturale e Geotecnica, Politecnico di Torino) ;
  • Invernizzi, S. (Dipartimento di Ingegneria Strutturale e Geotecnica, Politecnico di Torino)
  • 투고 : 2010.09.14
  • 심사 : 2012.03.19
  • 발행 : 2012.12.25

초록

In the present paper the problem of monotonically compressed concrete columns is studied numerically, accounting for transverse steel reinforcement and concrete cracking. The positive confinement effect of the ties on the core concrete is modeled explicitly and studied in the case of distributed or concentrated vertical load. The main aim is to investigate the influence of transverse reinforcement steel characteristics on the column load carrying capacity and ductility, in order to provide an evaluation about some standards requirements about the class and ductility of steel to be used for ties. The obtained results show that the influence of transverse reinforcement steel class of ductility is negligible both on the column load carrying capacity and on its ductility. Also the dissipated energy is basically unchanged. In view of these evidences, some standards requirements about the steel class of ductility to be used for ties appear to be rather questionable.

키워드

참고문헌

  1. Adeghe, L.N. and Collins, M.P. (1986), A finite element model for studying reinforced concrete detailing problems, Department of civil engineering, University of Toronto, 86-12.
  2. CEB-FIP (1993), Model code 1990, CEB Bulletin No. 213-214, Lausanne.
  3. CEN (2004), Eurocode 2: Design of concrete structures, Brussels, Ref. No. EN 1992-1-1:2004: E.
  4. Gao, H.Y., Guo, X.L. and Hu, X.F. (2011), "Crack identification based on Kriging surrogate model", Struct. Eng. Mech., 41(1), 25-41. https://doi.org/10.12989/sem.2012.41.1.025
  5. Guyon, Y. (1953), Prestressed concrete, John Wiley and Sons, New York.
  6. Hong, K.N., Han, S.H. and Yi, S.T. (2006), "High-strength concrete columns confined by low-volumetric-ratio lateral ties", Eng. Struct., 28(9), 1346-1353. https://doi.org/10.1016/j.engstruct.2006.01.010
  7. Hwang, S.K. and Yun, H.D. (2004), "Effects of transverse reinforcement on flexural behaviour of high-strength concrete columns", Eng. Struct., 26(1), 1-12. https://doi.org/10.1016/j.engstruct.2003.08.004
  8. Karantzikis, M., Papanicolaou, C.G., Antonopoulos, C.P. and Triantafillou. T.C. (2005), "Experimental investigation of nonconventional confinement for concrete using FRP", J. Compos. Constr., 9(6), 480-487. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:6(480)
  9. Khayat, K.H., Paultre, P. and Tremblay, S. (2001), "Structural performance and in-place properties of selfconsolidating concrete used for casting highly reinforced columns", ACI Mater. J., 102(4), 560-568.
  10. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Observed stress-strain behavior of confined concrete", J. Struct. Eng.-ASCE, 114(8), 1827-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827)
  11. Mirzabozorg, H., Kianoush, R. and Jalalzadeh, B. (2009), "Damage mechanics approach and modeling nonuniform cracking within finite elements for safety evaluation of concrete dams in 3D space", Struct. Eng. Mech., 33(1), 31-46. https://doi.org/10.12989/sem.2009.33.1.031
  12. Pandey, U.K. and Gurmail S. Benipal (2011), "Bilinear elastodynamical models of cracked concrete beams", Struct. Eng. Mech., 39(4), 465-498. https://doi.org/10.12989/sem.2011.39.4.465
  13. Philip, P. (2009), "A quasistatic crack propagation model allowing for cohesive forces and crack reversibility", Interact. Multiscale Mech., 2(1), 31-44. https://doi.org/10.12989/imm.2009.2.1.031
  14. Sheikh, S.A. and Uzumeri, S.M. (1980), "Strength and ductility of tied concrete columns", J. Struct. Div.-ASCE, 106(5), 1079-1102.
  15. Tesar, M. (1932), "Determination experimentale des tensions dans les extremites des pieces prismatiques munies d'une semi-articulation", Abh IVBHI.
  16. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI J., 83(22), 219-231.
  17. Vecchio, F.J. and Collins, M.P. (1993), "Compression response of cracked reinforced concrete", J. Struct. Eng.-ASCE, 119(12), 3590-3610. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3590)
  18. Yettram, A.L. (1969), "Anchorage zone stresses in axially post-tensioned members of uniform rectangular section", Mag. Concrete Res., 21(67), 103-112. https://doi.org/10.1680/macr.1969.21.67.103