DOI QR코드

DOI QR Code

Modeling of nonlinear response of R/C shear deficient t-beam subjected to cyclic loading

  • Hawileh, R.A. (Department of Civil Engineering, American University of Sharjah) ;
  • Abdalla, J.A. (Department of Civil Engineering, American University of Sharjah) ;
  • Tanarslan, M.H. (Department of Civil Engineering, Dokuz Eylul University)
  • 투고 : 2011.09.30
  • 심사 : 2012.05.08
  • 발행 : 2012.10.25

초록

This paper presents a finite element (FE) model for predicting the nonlinear response and behavior of a reinforced concrete T-beam deficient in shear under cyclic loading. Cracking loads, failure loads, response hysteresis envelopes and crack patterns were used as bench mark for comparison between experimental and FE results. A parametric study was carried out to predict the optimum combination of the open and close crack shear transfer coefficients (${\beta}_t$ and ${\beta}_c$) of the constitutive material model for concrete. It is concluded that when both shear transfer coefficients are equal to 0.2 the FE results gave the best correlation with the experimental results. The results were also verified on a rectangular shear deficient beam (R-beam) tested under cyclic loading and it is concluded that the variation of section geometry has no effect on the optimum choice of the values of shear transfer coefficients of 0.2. In addition, a parametric study based on the variation of concrete compressive strength, was carried out on the T-beam and it is observed that the variation of concrete compressive strength has little effect on the deflection. Further conclusions and observations were also drawn.

키워드

참고문헌

  1. Al-Taan, S.A. and Ezzadeen, N.A. (1995), "Flexural analysis of reinforced fibrous concrete members using the FE method", Comput. Struct., 56(6), 1065-1072. https://doi.org/10.1016/0045-7949(95)93124-8
  2. American Concrete Institute (ACI) (2005), ACI 318-05 Building code requirements for structural concrete and commentary, Farmington Hills, Michigan.
  3. ANSYS Version 11.0 (2007), Finite element computer code, ANSYS, Inc. Canonsburg, Pa. USA.
  4. ANSYS Workbench Version 11.0 (2007), ANSYS workbench documentation, ANSYS Inc. Canonsburg, Pa. USA ANSYS.
  5. ASCE Task Committee on Concrete and Masonry Structures (1982), State of the art report on finite element analysis of reinforced concrete, New York.
  6. Bangash, M.Y.H. (1989), "Concrete and concrete structures: numerical modeling and application", Elsevier Science Publishers Ltd., London, UK.
  7. Bhatt, P. and Kader, M.A. (1998), "Prediction of shear strength of reinforced concrete beams by nonlinear Finiteelement analysis", Comput. Struct., 68(1-3), 139-155. https://doi.org/10.1016/S0045-7949(98)00034-0
  8. Cela, J. (1998), "Analysis of reinforced concrete structures subjected to dynamic loads with a viscoplastic Drucker-Prager model", Appl. Math. Model, 22(7), 495-515. https://doi.org/10.1016/S0307-904X(98)10050-1
  9. Chen, D. (2006), "Computational framework for durability assessment of reinforced concrete structures under Coupled deterioration processes", PhD Thesis, Vanderbilt University, USA.
  10. Cotsovos, D.M., Zeris, C.A. and Abbas, A.A. (2009), "Finite element modelling of structural concrete", Proceedings of COMPDYN 2009, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Special Interest Conference M. Papadrakakis, M. Kojic, V. Papadopoulos (eds.), Rhodes, Greece, 22-24.
  11. Desayi, P. and Krishnan, S. (1964), "Equation for the stress-strain curve of concrete", J. Am. Conc. Inst., 61(3), 345-350.
  12. Fanning, P. (2001), "Nonlinear models of reinforced and post-tensioned concrete beams", Electronic J. Struct. Eng., 2, 111-119.
  13. Hawileh, R., Tanarslan, M., Naser, M. and Abdalla, J.A. (2011), "Experimental and numerical investigation on the performance of shear deficient RC beams strengthened with NSM GFRP reinforcement under cyclic loading", 3rd ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2011, Corfu, Greece.
  14. Hawileh, R., Abdalla, J., Tanarslan, M. and Naser, M. (2010), "Modeling of nonlinear cyclic response of sheardeficient RC T-beams strengthened with side bonded CFRP fabric strips", Comput. Concrete, 8(2), 193-206. https://doi.org/10.12989/cac.2011.8.2.193
  15. Hawileh, R.A., A. Rahman, A. and Tabatabai, H. (2010), "Nonlinear finite element analysis and modeling of a precast hybrid beam-column connection subjected to cyclic loads", Appl. Math. Model, 34(9), 2562-2583. https://doi.org/10.1016/j.apm.2009.11.020
  16. Hawileh, R.A., Abdalla, J.A. and Tanarslan, M.H. (2009), "Finite element analysis of a shear deficient reinforced concrete beam subjected to dynamic loading", Proceedings of 2nd South-East European Conference on Computational Mechanics (SEECCM 2009), an IACM-ECCOMAS Special Interest Conference M. Papadrakakis, M. Kojic, V. Papadopoulos (eds.), Rhodes, Greece.
  17. Hu, H.T. and Schnobrich, W.C. (1990), "Nonlinear analysis of cracked reinforced concrete", ACI Struct. J., 87(2), 99-207.
  18. Huang, Y., Kang, T.H.K., Ramseyer, C. and Rha, C. (2010), "Background to multi-scale modelling of unbonded post-tensioned concrete structures", Int. J. Theor. Appl. Muti. Mech., 1(3), 219-230.
  19. Kachlakev, D.I. (2002), "Finite element analysis and model validation of shear deficient reinforced concrete beams strengthened with GFRP laminates", Proceedings of the Third International Conference on Composites in Infrastructure, Paper 002, San Francisco, California, USA.
  20. Kim, W., Piyawat, K., Ramseyer, C. and Kang, T.H.K. (2010), "Experimental and numerical simulations of prestressed self-consolidating-concrete structures subject to nonlinear deformations", Int. J. Theor. Appl. Muti. Mech., 1(4), 319-338.
  21. Kotsovos, M.D. and Pavlovic, M.N. (1986), "Non-linear finite element modeling of concrete structures: basic analysis, phenomenological insight, and design implications", Eng. Comput., 3(3), 243-250. https://doi.org/10.1108/eb023663
  22. Kwak, H.G. and Filippou, F. (1990), Finite element analysis of reinforced concrete structures under monotonis loads, Report No. UCB/SEMM-90/14.
  23. Kwak, H.G. and Filippou, F. (1997), "Nonlinear FE analysis of R/C structures under monotonic loads", Comput. Struct., 65(1), 1-16. https://doi.org/10.1016/S0045-7949(96)00299-4
  24. Masti, K., Maghsoudi, A.A. and Rahgozar, R. (2008), "Nonlinear models and experimental investigation of lifetime history of HSC flexural beams", Am. J. Appl. Sci., 5(3), 248-262. https://doi.org/10.3844/ajassp.2008.248.262
  25. Naser, M., Hawileh, R., Abdalla, J.A. and Al-Tamimi, A. (2011), "Bond behavior of CFRP cured laminates: experimental and numerical investigation", J. Eng. Mater.-T ASME, 134(2), 021002.1-021002.9.
  26. Nilson, A.H. (1968), "Nonlinear analysis of reinforced concrete by the finite element method", J. Am. Concrete Inst., 65(9), 757-766.
  27. Obidat, T.T., Heyden, S. and Dahlblom, O. (2010), "The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM", Compos. Struct., 65(6), 1391-1398.
  28. Park, H. and Kim, J. (2005), "Hybrid plasticity model for reinforced concrete in cyclic shear", Eng. Struct., 27(1), 35-48. https://doi.org/10.1016/j.engstruct.2004.08.013
  29. Tanarslan, H.M. and Altin, S. (2010), "Behavior of RC T-section beams strengthened with CFRP strips subjected to cyclic load", Mater. Struct., 43(4), 529-542. https://doi.org/10.1617/s11527-009-9509-8
  30. Willam, K.J. and Warnke, E.D. (1975), "Constitutive model for the triaxial behavior of concrete", Proceedings, International Association for Bridge and Structural Engineering, 19, ISMES, Bergamo, Italy, 174.
  31. Zeinkiewicz, O.Z., Taylor, R.L. and Zhu, J.Z. (2005), The finite element method: its basis and fundamentals, Butterworth-Heinemann, Oxford, 6th edition.

피인용 문헌

  1. Effect of Longitudinal Carbon Fiber-Reinforced Polymer Plates on Shear Strength of Reinforced Concrete Beams vol.113, pp.3, 2016, https://doi.org/10.14359/51688475
  2. Research on pretensioned modular frame test and simulations vol.151, 2017, https://doi.org/10.1016/j.engstruct.2017.08.019
  3. An anticipated shear design method for reinforced concrete beams strengthened with anchoraged carbon fiber-reinforced polymer by using neural network vol.24, pp.1, 2015, https://doi.org/10.1002/tal.1152
  4. Nonlinear finite element modeling of reinforced concrete haunched beams designed to develop a shear failure vol.105, 2015, https://doi.org/10.1016/j.engstruct.2015.09.023
  5. Nonlinear behavior of shear deficient RC beams strengthened with near surface mounted glass fiber reinforcement under cyclic loading vol.61, 2014, https://doi.org/10.1016/j.matdes.2014.04.064
  6. Modeling the shear strength of concrete beams reinforced with CFRP bars under unsymmetrical loading pp.1537-6532, 2018, https://doi.org/10.1080/15376494.2018.1432803
  7. Numerical study on mechanical and adhesive splices for ribbed GFRP plates used in concrete beams vol.174, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.07.085
  8. Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.309