DOI QR코드

DOI QR Code

The high-rate brittle microplane concrete model: Part II: application to projectile perforation of concrete slabs

  • Frank, Andreas O. (U.S. Army Engineer Research and Development Center Explosive Effects Branch, ATTN) ;
  • Adley, Mark D. (U.S. Army Engineer Research and Development Center Explosive Effects Branch, ATTN) ;
  • Danielson, Kent T. (U.S. Army Engineer Research and Development Center Explosive Effects Branch, ATTN) ;
  • McDevitt, Henry S. Jr. (U.S. Army Engineer Research and Development Center Explosive Effects Branch, ATTN)
  • 투고 : 2010.07.03
  • 심사 : 2011.06.14
  • 발행 : 2012.04.25

초록

In this paper, we examine the behavior of the High-Rate Brittle Microplane (HRBM) concrete model based on a series of penetration experiments. These experiments were conducted with three different slab thicknesses (127, 216 and 254 mm) that provided a significant challenge for the numerical simulations. The 127 mm slab provided little resistance, the 216 mm slab provided nominal resistance and the 254 mm slab approached the perforation limit thickness of the projectile. These experiments provide a good baseline for evaluating material models since they have been shown to be extremely challenging; in fact, we have not encountered many material models that can provide quantitatively predictive results in terms of both projectile exit velocity and material damage. In a companion paper, we described the HRBM material model and its fit to various quasi-static material property data for WES-5000 concrete. In this paper, we show that, when adequately fit to these quasi-static data, the HRBM model does not have significant predictive capabilities, even though the quasi-static material fit may be exceptional. This was attributed to the rate-dependent response of the material. After various rate effects were introduced into the HRBM model, the quantitative predictive nature of the calculations dramatically increased. Unfortunately, not much rate-dependent material property data are in the literature; hence, accurate incorporation of rate effects into material models is difficult. Nonetheless, it seems that rate effects may be critical in obtaining an accurate response for concrete during projectile perforation events.

키워드

참고문헌

  1. Adley, M.D., Frank, A.O. and Danielson, K.T. (2010), "The high-rate brittle microplane concrete model: Part I: bounding curves and quasi-static fit to material property data", Comput. Concrete.
  2. Adley, M.D., Frank, A.O., Danielson, K.T., Akers, S.A. and O'Daniel, J.L. (2010), "The virtual penetration laboratory: new developments for projectile penetration in concrete", Comput. Concrete, 7(2), 87-102. https://doi.org/10.12989/cac.2010.7.2.087
  3. Akers, S.A., Adley, M.D. and Cargile, J.D. (1995), "Comparison of constitutive models for geologic materials used in penetration and ground shock calculations", Proceedings of the 7th International Symposium on the Interaction of Conventional Munitions with Protective Structures, Mannheim FRG.
  4. Bazant, Z.P., Caner, F.C., Carol, I., Adley, M.D. and Akers, S.A. (2000), "Microplane model M4 for concrete, I: formulation with work-conjugate deviatoric stress", J. Eng. Mech.-ASCE, 126(9), 944-953. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:9(944)
  5. Caner, F.C. and Bazant, Z.P. (2000), "Microplane model M4 for concrete. II: algorithm and calibration", J. Eng. Mech.-ASCE, 126(9), 954-961. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:9(954)
  6. Cargile, J.D. (1999), "Development of a constitutive model for numerical simulations of projectile penetration into brittle geomaterials", Technical Report SL-99-11, U.S. Army Engineer Research and Development Center, Vicksburg, MS.
  7. Danielson, K.T., Adley, M.D. and O'Daniel, J.L. (2010), "Numerical procedures for extreme impulsive loading on high strength concrete structures", Comput. Concrete, 7(2), 159-167. https://doi.org/10.12989/cac.2010.7.2.159
  8. Di Toro, G.D., Goldbsy, D.L. and Tullis, T.E. (2004), "Friction falls towards zero in quartz rock as slip velocity approaches seismic rates", Nature, 427(6973), 436-439. https://doi.org/10.1038/nature02249
  9. Frank, A.O. (2011), "An elastic-plastic material model for concrete under high-rate impulsive loads: modeling, implementation, and testing of the high-rate-brittle (HRB) concrete model", GSL-ERDC Tech. Report, draft.
  10. Frank, A.O. and Adley, M.D. (2007), "On the importance of a three-invariant model for simulating the perforation of concrete slabs", Proceedings of the 78th Shock and Vibration Symposium, Philadelphia, PA, 4-8.
  11. Frew, D.J. (2001), "Dynamic response of brittle materials from penetration and split hopkinson pressure bar experiments", Technical Report ERDC/GSL TR-01-6, U.S. Army Engineer Research and Development Center, Vicksburg, MS.
  12. Frew, D.J., Cargile, J.D. and Ehrgott, J.Q. (1993), "WES geodynamics and projectile penetration research facilities", Proceedings of the Symposium on Advances in Numerical Simulation Techniques for Penetration and Perforation of Solids, 1993 ASME Winter Annual Meeting, New Orleans, LA.
  13. Johnson, G.R., Beissel, S.R., Gerlach, C.A., Stryk, R.A. and Holmquis, T.J. (2008), "User instructions for the 2009 beta version of the EPIC code", Southwest Research Institute, San Antonio, TX.
  14. Kabir, M.E., Song, B., Martin, B.E. and Chen, W. (2010), "Compressive behavior of fine sand", Sandia National Laboratories Technical Report SAND2010-2289, Sandia National Laboratories, Albuquerque, NM.
  15. Littlefield, D., Walls, K.C. and Danielson, K.T. (2010), "Integration of the microplane constitutive model into the EPIC code", Comput. Concrete, 7(2), 145-158. https://doi.org/10.12989/cac.2010.7.2.145
  16. Luk, V.K., Fossum, A.F., Craft, D.C., Fortier, A.E., Cargile, J.D., Averett, J.G. and Williams, E.M. (2007), "Dynamic characterization and penetration analysis of fine aggregate cementitious material", Proceedings of the 12th International Symposium on Interaction of the Effects of Munitions with Structures, New Orleans, LA.
  17. Niemeijer, A.R. and Spiers, C.J. (2007), "A microphysical model for strong velocity weakening in phyllosilicatebearing fault gouges", J. Geophys. Res., 112(10), 1-12.
  18. Roth, J.M., Slawson, T.R. and Flores, O.G. (2010), "Flexural and tensile properties of a glass fiber-reinforced ultra-high-strength concrete: an experimental, micromechanical and numerical study", Comput. Concrete, 7(2), 169-190. https://doi.org/10.12989/cac.2010.7.2.169
  19. Schuler, H., Mayrhofer, C. and Thoma, K. (2003), "Experimental determination of damage parameter and implementation into a new damage law", Proceedings of the 11th International Symposium on Interaction of the Effects of Munitions with Structures, Mannheim, GE.
  20. Williams, E.M., Graham, S.S., Akers, S.A., Reed, P.A. and Rushing, T.S. (2010), "Constitutive property behavior of an ultra-high-performance concrete with and without steel fibers", Comput. Concrete, 7(2), 191-202. https://doi.org/10.12989/cac.2010.7.2.191

피인용 문헌

  1. 3D finite element simulations of high velocity projectile impact vol.72, 2015, https://doi.org/10.1016/j.ijsolstr.2015.07.010
  2. Impact comminution of solids due to local kinetic energy of high shear strain rate: I. Continuum theory and turbulence analogy vol.64, 2014, https://doi.org/10.1016/j.jmps.2013.11.008
  3. Impact comminution of solids due to local kinetic energy of high shear strain rate: II–Microplane model and verification vol.64, 2014, https://doi.org/10.1016/j.jmps.2013.11.009
  4. 3D finite element simulations of high velocity projectile impact vol.94, 2015, https://doi.org/10.1051/epjconf/20159404029
  5. Strain-rate-dependent microplane model for high-rate comminution of concrete under impact based on kinetic energy release theory vol.471, pp.2182, 2015, https://doi.org/10.1098/rspa.2015.0535
  6. Viscous energy dissipation of kinetic energy of particles comminuted by high-rate shearing in projectile penetration, with potential ramification to gas shale vol.193, pp.1, 2015, https://doi.org/10.1007/s10704-015-0019-0
  7. Impact Comminution of Solids Due to Progressive Crack Growth Driven by Kinetic Energy of High-Rate Shear vol.82, pp.3, 2012, https://doi.org/10.1115/1.4029636
  8. Effect of high-rate dynamic comminution on penetration of projectiles of various velocities and impact angles into concrete vol.216, pp.2, 2019, https://doi.org/10.1007/s10704-019-00354-0