DOI QR코드

DOI QR Code

Modeling of fiber pullout behaviors of stiff fiber reinforced cementitious composites

  • Chang, Xu (College of Civil Engineering, Henan Polytechnic University) ;
  • Chen, Ya-Juan (College of Civil Engineering, Henan Polytechnic University) ;
  • Lin, Hai-Xiao (College of Civil Engineering, Henan Polytechnic University) ;
  • Zhang, Yong-Bin (The State Key Lab of Coastal and Offshore Engineering, Dalian University of Technology)
  • 투고 : 2009.11.16
  • 심사 : 2011.06.21
  • 발행 : 2012.03.25

초록

This paper presents numerical studies of stiff fiber pullout behaviors of fiber reinforced cementitious composites based on a progressive damage model. The ongoing debonding process is simulated. Interfacial stress distribution for different load levels is analyzed. A parametric study, including bond strength and the homogeneity index on the pullout behaviors is carried out. The numerical results indicate that the bond stress decreases gradually from loaded end to embedded end along fiber-cement interface. The debonding initially starts from loaded end and propagates to embedded end as load increasing. The embedded length and bond strength affect the load-loaded end displacement curves significantly. The numerical results have a general agreement with the experimental investigation.

키워드

참고문헌

  1. Amnon Katz and Victor C. Li (1995), "Bond properties of carbon fibers in cementitious matrix", J. Mater. Civil Eng., 7(2), 125-128. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:2(125)
  2. Freund, L.B. (1992), "The axial force needed to slide a circular fiber along a hole in an elastic material and mplications for fiber pull-out", Eur. J. Mech., A.-Solid, 1, 1-19.
  3. Geubelle, P.H. and Baylor, J. (1998), "Impact-induced delamination of laminated composites: a 2D simulation", Compos. Part B.-Eng., 29(5), 589-602. https://doi.org/10.1016/S1359-8368(98)00013-4
  4. Hutchinson, J.W. and Jensen, H.M. (1990), "Models of fiber debonding and pullout in brittle composites with friction", Mech. Mater., 9(2), 139-163. https://doi.org/10.1016/0167-6636(90)90037-G
  5. Katz, A and Li, V.C. (1994), "Inclination angle effect of carbon fibers in cementitious composites", J. Eng. Mech.-ASCE, 121(12), 1340-1348.
  6. Li, V.C. (2002), "Large volume high performance applications of fibers in civil engineering", J. Appl. Polym. Sci., 83(3), 660-686. https://doi.org/10.1002/app.2263
  7. Li, V.C. and Leung, C.K.Y. (1988), "Ceramics for construction", Constr. Build. Mater., 2(2), 59-68. https://doi.org/10.1016/0950-0618(88)90017-7
  8. Li, V.C. and Lim, H.S. (1988), "Modeling surface deformations at complex strike-slip plate boundaries", J. Geophys. Res., 93(7), 7943-7954. https://doi.org/10.1029/JB093iB07p07943
  9. Needleman, A. (1987), "A continuum model for void nucleation by inclusion debonding", J. Appl Mech., 54(3), 525-531. https://doi.org/10.1115/1.3173064
  10. Ong, K., Basheerkhan, M. and Paramasivam, P. (1999), "Resistance of fiber concrete slabs to low velocity projectile impact, Cement Concrete Comp., 21(5), 391-401. https://doi.org/10.1016/S0958-9465(99)00024-4
  11. Pearce, C.J., Thavalingam, A., Liao, Z. and Bicanic, N. (2000), "Computational aspects of the discontinuous deformation analysis framework for modeling concrete fracture", Eng. Fract. Mech., 65(2), 283-298. https://doi.org/10.1016/S0013-7944(99)00121-6
  12. Ramadoss, P. and Nagamani, K. (2006) "Investigations on the tensile strength of high-performance fiber reinforced concrete using statistical methods", Comput. Concrete, 3(6), 389-400. https://doi.org/10.12989/cac.2006.3.6.389
  13. Ramadoss, P. and Nagamani, K. (2008), "A new strength model for the high-performance fiber reinforced concrete", Comput. Concrete, 5(1), 21-36. https://doi.org/10.12989/cac.2008.5.1.021
  14. Ramadoss, P. and Nagamani, K. (2009), "Behavior of high-strength fiber reinforced concrete plates under inplane and transverse loads", Struct. Eng. Mech. J., 31(4), 371-382. https://doi.org/10.12989/sem.2009.31.4.371
  15. Schryer, H.L. and Peffer, A. (2000), "Fiber pullout based on a one-dimensional model of decohesion", Mech. Mater., 32(12), 821-836. https://doi.org/10.1016/S0167-6636(00)00049-1
  16. Tang, C.A. (1997), "Numerical simulation of progressive rock failure and associated seismicity", Int. J. Rock. Mech Min., 34(2), 249-261. https://doi.org/10.1016/S0148-9062(96)00039-3
  17. Tang, C.A., Liang, Z.Z., Zhang, Y.B. and Chang, X. (2008), "Fracture spacing in layered materials: a new explanation based on two-dimensional failure process modeling", Am. J. Sci., 308(1), 49-72. https://doi.org/10.2475/01.2008.02
  18. Tvergaard, V. (1990), "Effect of fiber debonding in a whisker reinforced metal", Mater. Sci. Eng., 125(2), 203-213. https://doi.org/10.1016/0921-5093(90)90170-8
  19. Yang, Q.S., Qin, Q.H. and Peng, X.R. (2003), "Size effects in fiber pullout test", Compos. Struct., 61(3), 193-198. https://doi.org/10.1016/S0263-8223(03)00066-7
  20. Zhang, J. and Li, Victor C. (2002), "Effect of inclination angle on fiber rupture load in fiber reinforced cementitious composites", Compos. Sci. Technol., 62(6), 775-781. https://doi.org/10.1016/S0266-3538(02)00045-3

피인용 문헌

  1. Implementation of bond-slip effects on behaviour of slabs in structures vol.16, pp.2, 2015, https://doi.org/10.12989/cac.2015.16.2.311
  2. Mechanical performances of steel fiber reinforced high strength concrete disc under cyclic loading vol.146, 2017, https://doi.org/10.1016/j.conbuildmat.2017.04.090