DOI QR코드

DOI QR Code

Statistical methods of investigation on the compressive strength of high-performance steel fiber reinforced concrete

  • Ramadoss, P. (Department of Civil Engineering, Pondicherry Engineering College) ;
  • Nagamani, K. (Structural Engineering Division, Department of Civil Engineering, Anna University)
  • 투고 : 2010.02.22
  • 심사 : 2011.06.24
  • 발행 : 2012.02.28

초록

The contribution of steel fibers on the 28-day compressive strength of high-performance steel fiber reinforced concrete was investigated, is presented. An extensive experimentation was carried out over water-cementitious materials (w/cm) ratios ranging from 0.25 to 0.40, with silica fume-cementitious materials ratios from 0.05 to 0.15, and fiber volume fractions ($V_f$= 0.0, 0.5, 1.0 and 1.5%) with the aspect ratios of 80 and 53. Based on the test results of 44 concrete mixes, mathematical model was developed using statistical methods to quantify the effect of fiber content on compressive strength of HPSFRC in terms of fiber reinforcing index. The expression, being developed with strength ratios and not with absolute values of strengths, is independent of specimen parameters and is applicable to wide range of w/cm ratios, and used in the mix design of steel fiber reinforced concrete. The estimated strengths are within ${\pm}3.2%$ of the actual values. The model was tested for the strength results of 14 mixes having fiber aspect ratio of 53. On examining the validity of the proposed model, there exists a good correlation between the predicted values and the experimental values of different researchers. Equation is also proposed for the size effect of the concrete specimens.

키워드

참고문헌

  1. ACI 211.4R-93 (1999-Part1), Guide for selecting proportions for High strength concrete with Portland cement and Fly ash, ACI Manual of concrete practice, Farmington Hills.
  2. ACI Committee 544 (1996), State-of-the-art report on fiber reinforced concrete, ACI 544.1R-96, ACI Manual of concrete practice, Farmington Hills.
  3. ACI Committee 544-1988 (2006), Measurement of properties of fiber reinforced concrete, ACI Manual of concrete practice, Farmington Hills.
  4. ACI Committee 544.3R-93 (2006), Guide for specifying, mixing, placing and finishing steel fiber reinforced concrete, ACI Manual of concrete practice, Farmington Hills.
  5. ASTM C39-1992, Standard test method for compressive strength of fiber reinforced concrete, Annual book of ASTM standards, American society for testing and materials, USA
  6. Attcin, P.C. (1998), High performance concrete, 1st Edition, E&FN, SPON, London, 1998.
  7. Balaguru, N. and Shah, S.P. (1992), Fiber reinforced concrete composites, McGraw Hill International Edition, New York, 1992.
  8. Barros, J.A.O. and Figueiras, J.A. (1999), "Flexural behavior of SFRC: Testing and modeling", ASCE, J. Mater. Civil. Eng., 11(4), 331-339. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(331)
  9. Bhanja, S. and Sengupta, B. (2002), "Investigation on the compressive strength of silica fume concrete using statistical methods", Cement Concrete Res., 32(9), 391-1394.
  10. Bharathkumar, B.H. and Narayanan, R. (2001), "Mix proportioning of high-performance concrete", Cement Concrete Comp., 23(1), 71-80. https://doi.org/10.1016/S0958-9465(00)00071-8
  11. Bhattacharya, G.K. and Johnson, R.A. (1977), Statistical concepts and methods, Wiley, New York.
  12. Cook, R.D. and Weishberk, S. (1982), Residuals and influence in regression, Chapman & Hall, London.
  13. Duval, R. and Kadri, E.H. (1998), "Influence of silica fume on workability and compressive strength of high performance concrete", Cement Concrete Res., 29, 533-548.
  14. Ezeldin, A.S. and Balaguru, P.N. (1992), "Normal and high strength fiber reinforced concrete under compression", ASCE, J. Mater. Civil Eng., 4(4), 415-429. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  15. Fanella, D.A. and Naaman, A.E. (1985), "Stress-strain properties of fiber reinforced mortar in compression", ACI J., 82(4), 475-583.
  16. Hooton, R.D. (1993), "Influence of silica fume replacement of cement on physical properties and resistance sulfate attack, freezing and thawing, and alkali-silica reactivity", ACI Mater. J., 90(2), 143-151.
  17. Iravani (1993), "Mechanical properties of high performance concrete", ACI Mater. J., 93(5), 416-425.
  18. IS: 516-1979, Indian standard methods of tests for strength of concrete, BIS 2002 Bureau of Indian Standards, New Delhi, India
  19. Mansur, M.A., Chin, M.S. and Wee, Y.H. (1999), "Stress-strain relationship of high strength fiber concrete in compression", ASCE, J. Mater. Civil Eng., 13(1), 21-29.
  20. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curve for steel fiber reinforced concrete in compression", Cement Concrete Comp., 21(5/6), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  21. Ramadoss, P. and Nagamani, K. (2006), "Investigations on the tensile strength of high-performance fiber reinforced concrete using statistical methods", Comput. Concrete, Int. J., 3(6), 389-400. https://doi.org/10.12989/cac.2006.3.6.389
  22. Ramadoss, P. and Nagamani, K. (2008), "Stress-strain curves for high-performance fiber reinforced concrete under compression", J. Civil Eng. Res. Pract., 5(1), 1-14.
  23. Ramadoss, P. and Nagamani, K. (2008), "Tensile strength and durability characteristics of high-performance fiber reinforced concrete", Arab. J. Sci. Eng., 33(2B), 307-319.
  24. Song, H.W. and Hwang, S. (2004), "Mechanical properties of high strength reinforced concrete", Constr. Build. Mater., 18, 669-673. https://doi.org/10.1016/j.conbuildmat.2004.04.027
  25. Spiegel, M.R. and Stephens, L.J. (2000), Theory and problems of statistics (3rd edition), Tata McGraw-Hill publishing Co. Ltd., New Delhi.
  26. Trottier, J. and Banthia, N. (1994), "Toughness characteristics of steel-fiber reinforced concrete", ASCE, J. Mater. Civil Eng., 6(2), 264-289. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:2(264)
  27. Wafa, F.F. and Ashour, S.A. (1992), "Mechanical properties of high-strength fiber reinforced concrete", ACI Mater. J., 89(5), 445-455.
  28. Zang, G., Liu, B., Bai, G. and Liu, J. (2009), "Experimental study on the seismic behavior of high strength reinforced concrete frame columns with high axial compression ratios", Struct. Eng. Mech., Int. J., 33(5).

피인용 문헌

  1. Performance of HSC columns under severe cyclic loading vol.13, pp.2, 2015, https://doi.org/10.1007/s10518-014-9617-x
  2. Simulation of Experimental Parameters of RC Beams by Employing the Polynomial Regression Method vol.52, pp.3, 2016, https://doi.org/10.1007/s11029-016-9590-3
  3. Numerical and statistical analysis about displacements in reinforced concrete beams using damage mechanics vol.10, pp.3, 2012, https://doi.org/10.12989/cac.2012.10.3.307
  4. An evolutionary system for the prediction of high performance concrete strength based on semantic genetic programming vol.19, pp.6, 2017, https://doi.org/10.12989/cac.2017.19.6.651
  5. Effect of hybrid fibers on flexural performance of reinforced SCC symmetric inclination beams vol.22, pp.2, 2012, https://doi.org/10.12989/cac.2018.22.2.209
  6. Estimating the compressive strength of HPFRC containing metallic fibers using statistical methods and ANNs vol.10, pp.6, 2012, https://doi.org/10.12989/acc.2020.10.6.479