Advances in materials Research

  • 제1권2호
  • /
  • Pages.147-160
  • /
  • 2012
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical and metallurgical properties of diffusion bonded AA2024 Al and AZ31B Mg

  • Mahendran, G. (IFET College of Engineering) ;
  • Balasubramanian, V. (CEMAJOR, Annamalai University) ;
  • Senthilvelan, T. (Podicherry Engineering College)
  • 투고 : 2012.05.19
  • 심사 : 2012.06.21
  • 발행 : 2012.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, diffusion bonding was carried out between AZ31B magnesium and AA2024 aluminium in the temperature range of $405^{\circ}C$ to $475^{\circ}C$ for 15 min to 85 min and 5MPa to 20 MPa uniaxial loads was applied. Interface quality of the joints was assessed by microhardness and shear testing. Also, the bonding interfaces were analyzed by means of optical microscopy, scanning electron microscopy, energy dispersive spectrometer and XRD. The maximum bonding and shear strength was obtained at $440^{\circ}C$, 12 MPa and 70 min. The maximum hardness values were obtained from the area next to the interface in magnesium side of the joint. The hardness values were found to decrease with increasing distance from the interface in magnesium side while it remained constant in aluminium side. It was seen that the diffusion transition zone near the interface consists of various phases of $MgAl_2O_4$, $Mg_2SiO_4$ and $Al_2SiO_5$.

키워드

참고문헌

  1. Bakhtiaria, R., Ekramia, A. and Khanb, T.I. (2012), "The effect of TLP bonding temperature on microstructural and mechanical property of joints made using FSX-414 super alloy", Mater. Sci. Eng. A, 546(1), 291-300. https://doi.org/10.1016/j.msea.2012.03.073
  2. Huga, A., Dornc, C.K. and Abdoua, M. (2012), "Diffusion bonding beryllium to reduced activation ferritic martensitic steel: Development of processes and techniques", Fusion Eng. Des., dx.doi.org/10.1016/2012.04.010
  3. K., Ayd n, Y., Kaya and N., Kahraman (2012), "Experimental study of diffusion welding/bonding of titanium to copper", Mater. Design, 37, 356-368. https://doi.org/10.1016/j.matdes.2012.01.026
  4. Kenevisi, M.S. and Mousavi Khoie, S.M. (2012), "An investigation on microstructure and mechanical properties of Al 7075 to Ti-6Al-4V Transient Liquid Phase (TLP) bonded joint", Mater. Des, 38, 19-25. https://doi.org/10.1016/j.matdes.2012.01.046
  5. Kenevisi, M.S. and Mousavi Khoie, S.M. (2012), "A study on the effect of bonding time on the properties of Al7075 to Ti-6Al-4V diffusion bonded joint", Mater. Lett, 76(1), 144-146. https://doi.org/10.1016/j.matlet.2012.02.104
  6. Kundu, S., Roy, D., Chatterjee, S., Olson, D. and Mishra, B. (2012), "Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints", Mater. Design, 37, 560-568. https://doi.org/10.1016/j.matdes.2011.10.041
  7. Li, W.H. and Joelle Ong, S.W. (2012), "Cu diffusion in Ag-plated Cu leadframe packages", Microelectron. Reliab., 52(7), 1523-1527. https://doi.org/10.1016/j.microrel.2012.02.022
  8. Li, Z.F., Dong, J., Zeng, X.Q., Lu, C., Ding, W.J. and Ren, Z.M. (2007), "Influence of strong magnetic field on intermediate phase growth in Mg-Al diffusion couple", J. Alloy. Compd., 440(1-2), 132-136. https://doi.org/10.1016/j.jallcom.2006.09.032
  9. Masahashi, N., Semboshi, S., Konno, T.J. and Hanada, S. (2006), "Effect of pressure application on micro structure evolution in a composite of Fe-Al alloy and Cr Mo steel", J. Alloy. Compd., 413(1-2), 281-288. https://doi.org/10.1016/j.jallcom.2005.05.047
  10. P., Zhang, J., Zhao and B., Wenb (2012), "Retention and diffusion of H, He, O, C impurities in Be", J. Nucl. Mater., 423(1-3), 164-169. https://doi.org/10.1016/j.jnucmat.2012.01.027
  11. P., Liu, Y., Li, H., Geng and J., Wang (2006), "Investigation of interfacial structure of Mg/Al vacuum diffusion bonded joint", Vacuum, 80(5), 395-399. https://doi.org/10.1016/j.vacuum.2005.07.002
  12. Ravisankar, B., Krishnamoorthi, J., Ramakrishnan, S.S. and Angelo, P.C. (2009), "Diffusion bonding of SU 263", J. Mater. Process. Tech, 209(4), 2135-2144. https://doi.org/10.1016/j.jmatprotec.2008.05.015
  13. S., Ozcan, A., Ozcifci, S., Hiziroglu and H., Toker, (2012), "Effects of heat treatment and surface roughness on bonding strength", Constr. Build. Mater., 33, 7-13. https://doi.org/10.1016/j.conbuildmat.2012.01.008
  14. Tanaba, U.J., Sasaki, T. and Kishi, S. (2007), "Diffusion bonding of Ti/graphite and Ti/diamond by hot isostatic pressing method", 192-193, 453-458. https://doi.org/10.1016/j.jmatprotec.2007.04.014
  15. W.W., Basuki, O., Kraft and J., Aktaa (2012), "Optimization of solid-state diffusion bonding of Hastelloy C-22 for micro heat exchanger applications by coupling of experiments and simulations", Mater. Sci. Eng. A, 538, 340-348. https://doi.org/10.1016/j.msea.2012.01.056
  16. W., Deqing, S., Ziyuan and Q., Ruobin (2007) "Cladding of stainless steel on aluminium and carbon steel by inter layer diffusion bonding", Scripta Mater, 56(5), 369-372. https://doi.org/10.1016/j.scriptamat.2006.11.003
  17. W., Juan, L., Yajiang, L., Penga and G., Haoranb (2008), "Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding", J. Mater. Process. Tech., 205(1-3), 146-150. https://doi.org/10.1016/j.jmatprotec.2007.11.096
  18. Y., Li, P., Liu, J., Wang and H., Ma, (2008), "XRD and SEM analysis near the diffusion bonding interface of Mg/Al dissimilar Materials", Vacuum, 82(1), 15-19.
  19. Z., Jian, S., Qiang, L., Guoqiang, L., Meijuan and Z., Lianmeng, (2012), "Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer", Mater. Design, 39, 81-86. https://doi.org/10.1016/j.matdes.2012.02.032

피인용 문헌

  1. Mechanical properties of Al/Al2O3and Al/B4C composites vol.5, pp.4, 2016, https://doi.org/10.12989/amr.2016.5.4.263
  2. Diffusion Bonding of Al 6061 and Cu by Hot Isostatic Pressing vol.35, pp.1, 2012, https://doi.org/10.1007/s11595-020-2242-4