DOI QR코드

DOI QR Code

Practical estimation of veering effects on high-rise structures: a database-assisted design approach

  • Yeo, DongHun (National Institute of Standards and Technology)
  • Received : 2010.12.29
  • Accepted : 2011.10.12
  • Published : 2012.09.25

Abstract

Atmospheric boundary layer winds experience two types of effects due to friction at the ground surface. One effect is the increase of the wind speeds with height above the surface. The second effect, called the Ekman layer effect, entails veering - the change of the wind speed direction as a function of height above the surface. In this study a practical procedure is developed within a database-assisted design (DAD) framework that accounts approximately for veering effects on tall building design. The procedure was applied in a case study of a 60-story reinforced concrete building, which also considered the dependence of veering effects on the orientation of the building. Comparisons are presented between response estimates that do not account for veering, and account for veering conservatively. For the case studied in this paper veering effects were found to be small.

Keywords

References

  1. ACI (2008), Building code requirements for structural concrete (ACI 318-08) and commentary, American Concrete Institute, Farmington Hills, MI.
  2. ASCE (2005), Minimum design loads for buildings and other structures, American Society of Civil Engineers, Reston, VA.
  3. Batts, M.E., Russell, L.R. and Simiu, E. (1980), "Hurricane wind speeds in the United States", J. Struct. Division-ASCE, 106(10), 2001-2016.
  4. Dyrbye, C. and Hansen, S.O. (1997), Wind loads on structures, John Wiley & Sons.
  5. Holmes, J.D. (2007), Wind loading of structures, Spon Press, New York.
  6. Howroyd, G.C. and Slawson, P.R. (1975), "The characteristics of a laboratory produced turbulent Ekman layer", Bound-Lay Meteorol., 8(2), 201-219. https://doi.org/10.1007/BF00241337
  7. Isyumov, N., Fediw, A.A., Colaco, J. and Banavalkar, P.V. (1992), "Performance of a tall building under wind action", J. Wind Eng. Ind. Aerod., 42(1)-(3), 1053-1064. https://doi.org/10.1016/0167-6105(92)90112-N
  8. Kareem, A., Kijewski, T. and Tamura, Y. (1999), "Mitigation of motions of tall buildings with specific examples of recent applications", Wind Struct., 2(3), 201-251. https://doi.org/10.12989/was.1999.2.3.201
  9. PCA (2008), PCA notes on 318-08 building code requirements for structural concrete with design applications, Portland Cement Association, Skokie, IL.
  10. Powell, M.D. (2005), personal communication.
  11. Powell, M.D., Vickery, P.J. and Reinhold, T.A. (2003), "Reduced drag coefficient for high wind speeds in tropical cyclones", Nature, 422(6929), 279-283. https://doi.org/10.1038/nature01481
  12. Schlichting, H. (1960), Boundary layer theory, McGraw-Hill, New York.
  13. Simiu, E. and Miyata, T. (2006), Design of buildings and bridges for wind: a practical guide for ASCE-7 Standard users and designers of special structures, John Wiley & Sons, Hoboken, NJ.
  14. Simiu, E. and Scanlan, R.H. (1996), Wind effects on structures, John Wiley & Sons.
  15. Teshigawara, M. (2001), Structural design principles (chapter 6), Imperial College Press, London.
  16. Thuillier, R.H. and Lappe, U.O. (1964), "Wind and temperature profile characteristics from observations on a 1400 ft tower", J. Appl. Meteorol., 3(3), 299-306. https://doi.org/10.1175/1520-0450(1964)003<0299:WATPCF>2.0.CO;2
  17. Venanzi, I. (2005), Analysis of the torsional response of wind-excited high-rise building, Ph.D. Dissertation, Università degli Studi di Perugia, Perugia.
  18. Yeo, D. (2010), Database-assisted design of high-rise reinforced concrete structures for wind: Concepts, software, and application, NIST Technical Note 1665, National Institute of Standards and Technology, Gaithersburg, MD.

Cited by

  1. Numerical study on self-sustainable atmospheric boundary layer considering wind veering based on steady k-ε model vol.30, pp.1, 2012, https://doi.org/10.12989/was.2020.30.1.069
  2. Investigation of Marine Wind Veer Characteristics Using Wind Lidar Measurements vol.11, pp.11, 2012, https://doi.org/10.3390/atmos11111178
  3. Numerical simulation of wind veering effects on square-section super high-rise buildings under various wind directions vol.44, pp.None, 2021, https://doi.org/10.1016/j.jobe.2021.102954
  4. Large eddy simulation of the atmospheric boundary layer to investigate the Coriolis effect on wind and turbulence characteristics over different terrains vol.220, pp.None, 2022, https://doi.org/10.1016/j.jweia.2021.104845
  5. Numerical simulation of wind veering effects on aeroelastic responses of thousand-meter-scale super high-rise buildings vol.46, pp.None, 2012, https://doi.org/10.1016/j.jobe.2021.103790