DOI QR코드

DOI QR Code

Energy harvesting and power management of wireless sensors for structural control applications in civil engineering

  • 투고 : 2011.06.10
  • 심사 : 2012.07.28
  • 발행 : 2012.09.25

초록

The authors' research efforts recently led to the development of a customized wireless control unit which receives the real-time feedbacks from the sensors, and elaborates the consequent control signal to drive the actuator(s). The controller is wireless in performing the data transmission task, i.e., it receives the signals from the sensors without the need of installing any analogue cable connection between them, but it is powered by wire. The actuator also needs to be powered by wire. In this framework, the design of a power management unit is of interest only for the wireless sensor stations, and it should be adaptable to different kind of sensor requirements in terms of voltage and power consumption. In the present paper, the power management efficiency is optimized by taking into consideration three different kinds of accelerometers, a load cell, and a non-contact laser displacement sensor. The required voltages are assumed to be provided by a power harvesting solution where the energy is stored into a capacitor.

키워드

참고문헌

  1. Battaini, M. (1999), "Controlled structural systems: design and reliability", Struct. Health Monit., 6(1), 11-52.
  2. Casciati, F. and Rossi, R. (2004), Fuzzy chip controllers and wireless links in smart structures, in Advances in Smart Technologies in Structural Engineering, Jadwisin, Poland, Springer Verlag.
  3. Casciati, F. and Rossi, R. (2007), "A power harvester for wireless sensing applications", Struct. Health Monit., 14(4), 649-659. https://doi.org/10.1002/stc.179
  4. Casciati, S. (2008), "Stiffness identification and damage localization via differential evolution algorithms", Struct. Health Monit., 15(3), 436-449. https://doi.org/10.1002/stc.236
  5. Casciati, S. (2010), "Statistical approach to a SHM benchmark problem", Smart Struct. Syst., 6(1), 17-27. https://doi.org/10.12989/sss.2010.6.1.017
  6. Casciati, S. (2010), "Response surface models to detect and localize distributed cracks in a complex continuum", J. Eng. Mech.- ASCE, 136(9), 1131-1142. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000148
  7. Casciati, S. and Al-Saleh, R. (2010), "Dynamic behavior of a masonry civic belfry under operational conditions", Acta Mech., 215(1-4), 211-224. https://doi.org/10.1007/s00707-010-0343-4
  8. Casciati, S. and Osman, A. (2005), "Damage assessment and retrofit study for the luxor memnon colossi", Struct. Health Monit., 12(2), 139-156. https://doi.org/10.1002/stc.53
  9. Casciati, S. and Faravelli, L. (2010), "Vulnerability assessment for medieval civic towers", Struct. Infrastruct. E., 6(1-2), 193-203. https://doi.org/10.1080/15732470802664290
  10. Casciati, S. and Chen, Z.C. (2011), "A multi-channel wireless connection system for structural health monitoring applications", Struct. Health Monit., 18(5), 588-600. https://doi.org/10.1002/stc.403
  11. Casciati S. and Chen, Z.C. (2012), "An active mass damper system for structural control using real-time wireless sensors", Struct. Health Monit., early view, DOI: 10.1002/stc.1485.
  12. Lynch, J.P. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib., 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  13. Lynch, J.P., Wang, Y., Swartz, R.A., Lu, K.C. and Loh, C.H. (2008), "Implementation of a closed-loop structural control system using wireless sensor networks", Struct. Health Monit., 15(4), 518-539. https://doi.org/10.1002/stc.214
  14. Messervey, T.B., Frangopol, D.M. and Casciati, S. (2011), "Application of the statistics of extremes to the reliability assessment and performance prediction of monitored highway bridges", Struct. Infrastruct. E., 7(1), 87-99. https://doi.org/10.1080/15732471003588619
  15. Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer Jr., B.F., Agha, G. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. https://doi.org/10.12989/sss.2010.6.5_6.423
  16. Spencer Jr., B.F. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng. - ASCE, 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845)

피인용 문헌

  1. Harvesting energy from vibrations of the underlying structure vol.19, pp.15, 2013, https://doi.org/10.1177/1077546313501537
  2. An algorithm based on two-step Kalman filter for intelligent structural damage detection vol.22, pp.4, 2015, https://doi.org/10.1002/stc.1712
  3. Structural damage detection using wireless passive sensing platform based on RFID technology vol.23, pp.8, 2016, https://doi.org/10.1002/stc.1826
  4. Structural Health Monitoring in Incrementally Launched Steel Bridges: Patch Loading Phenomena Modeling vol.58, 2015, https://doi.org/10.1016/j.autcon.2015.07.001
  5. Toward a paradigm for civil structural control vol.14, pp.5, 2014, https://doi.org/10.12989/sss.2014.14.5.981
  6. Wireless structural control using multi-step TDMA communication patterning bandwidth allocation vol.24, pp.12, 2017, https://doi.org/10.1002/stc.2025
  7. Collecting data from a sensor network in a single-board computer vol.628, 2015, https://doi.org/10.1088/1742-6596/628/1/012113
  8. Wireless structural control using stochastic bandwidth allocation and dynamic state estimation with measurement fusion vol.25, pp.2, 2018, https://doi.org/10.1002/stc.2104
  9. A cost effective wireless structural health monitoring network for buildings in earthquake zones vol.23, pp.10, 2014, https://doi.org/10.1088/0964-1726/23/10/105010
  10. Real-time monitoring system for local storage and data transmission by remote control vol.112, 2017, https://doi.org/10.1016/j.advengsoft.2017.06.010
  11. Vibration monitoring of a footbridge with a wireless sensor network vol.19, pp.15, 2013, https://doi.org/10.1177/1077546313501929
  12. A low-noise, real-time, wireless data acquisition system for structural monitoring applications vol.21, pp.7, 2014, https://doi.org/10.1002/stc.1636
  13. Energy-Efficient Heterogeneous Wireless Sensor Deployment with Multiple Objectives for Structural Health Monitoring vol.16, pp.12, 2016, https://doi.org/10.3390/s16111865
  14. Local positioning systems versus structural monitoring: a review vol.21, pp.9, 2014, https://doi.org/10.1002/stc.1643
  15. Energy-aware wireless sensor placement in structural health monitoring using hybrid discrete firefly algorithm vol.22, pp.4, 2015, https://doi.org/10.1002/stc.1707
  16. In-Situ Validation of a Wireless Data Acquisition System by Monitoring a Pedestrian Bridge vol.18, pp.1, 2015, https://doi.org/10.1260/1369-4332.18.1.97
  17. Broadband electromagnetic power harvester from vibrations via frequency conversion by impact oscillations vol.105, pp.11, 2014, https://doi.org/10.1063/1.4895927
  18. Robust control of seismically excited cable stayed bridges with MR dampers vol.26, pp.3, 2017, https://doi.org/10.1088/1361-665X/aa5bd4
  19. Synergy of monitoring and security vol.17, pp.5, 2016, https://doi.org/10.12989/sss.2016.17.5.743
  20. An electromagnetic vibration absorber with harvesting and tuning capabilities vol.22, pp.11, 2015, https://doi.org/10.1002/stc.1748
  21. Wideband and 2D vibration energy harvester using multiple magnetoelectric transducers vol.16, pp.4, 2015, https://doi.org/10.12989/sss.2015.16.4.579
  22. Energy efficiency strategy for a general real-time wireless sensor platform vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.617
  23. A European Association for the Control of Structures joint perspective. Recent studies in civil structural control across Europe vol.21, pp.12, 2014, https://doi.org/10.1002/stc.1652
  24. Intelligent Monitoring of Multistory Buildings under Unknown Earthquake Excitation by a Wireless Sensor Network vol.8, pp.12, 2012, https://doi.org/10.1155/2012/914638
  25. A methodology for sustainable monitoring of micro locations at remote, hard-to-access and unsafe places vol.15, pp.5, 2015, https://doi.org/10.12989/sss.2015.15.5.1363
  26. Nonlinear data-driven computational models for response prediction and change detection vol.22, pp.2, 2015, https://doi.org/10.1002/stc.1673
  27. An energy harvesting and damage sensing solution based on postbuckling response of nonuniform cross-section beams vol.25, pp.1, 2018, https://doi.org/10.1002/stc.2052
  28. Pedestrian Timber Bridges: Experimental Investigation and Modelling vol.569-570, pp.1662-9795, 2013, https://doi.org/10.4028/www.scientific.net/KEM.569-570.319
  29. Optimization of sensor placement for structural health monitoring: a review pp.1741-3168, 2019, https://doi.org/10.1177/1475921719825601
  30. Self-powered hybrid electromagnetic damper for cable vibration mitigation vol.20, pp.3, 2017, https://doi.org/10.12989/sss.2017.20.3.285
  31. Optimal Wireless Sensor Placement in Structural Health Monitoring Emphasizing Information Effectiveness and Network Performance vol.34, pp.2, 2021, https://doi.org/10.1061/(asce)as.1943-5525.0001226
  32. Pareto-Based Bi-Objective Optimization Method of Sensor Placement in Structural Health Monitoring vol.11, pp.11, 2012, https://doi.org/10.3390/buildings11110549
  33. Geometrical Investigation of Piezoelectric Patches for Broadband Energy Harvesting in Non-Deterministic Composite Plates
 vol.14, pp.23, 2012, https://doi.org/10.3390/ma14237370
  34. Indoor light energy harvesting using infrared LED vol.101, pp.15, 2012, https://doi.org/10.1080/03067319.2020.1711890