DOI QR코드

DOI QR Code

A split spectrum processing of noise-contaminated wave signals for damage identification

  • Miao, X.T. (State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University) ;
  • Ye, Lin (Laboratory of Smart Materials and Structures (LSMS), Centre for Advanced Materials Technology (CAMT), School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney) ;
  • Li, F.C. (State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University) ;
  • Sun, X.W. (State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University) ;
  • Peng, H.K. (Shanghai Institute of Satellite Engineering) ;
  • Lu, Ye (Laboratory of Smart Materials and Structures (LSMS), Centre for Advanced Materials Technology (CAMT), School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney) ;
  • Meng, Guang (State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University)
  • 투고 : 2011.05.25
  • 심사 : 2012.07.22
  • 발행 : 2012.09.25

초록

A split spectrum processing (SSP) method is proposed to accurately determine the time-of-flight (ToF) of damage-scattered waves by comparing the instantaneous amplitude variation degree (IAVD) of a wave signal captured from a damage case with that from the benchmark. The fundamental symmetrical ($S_0$) mode in aluminum plates without and with a notch is assessed. The efficiency of the proposed SSP method and Hilbert transform in determining the ToF of damage-scattered $S_0$ mode is evaluated for damage identification when the wave signals are severely contaminated by noise. Broadband noise can overwhelm damage-scattered wave signals in the time domain, and the Hilbert transform is only competent for determining the ToF of damage-scattered $S_0$ mode in a noise-free condition. However, the calibrated IAVD of the captured wave signal is minimally affected by noise, and the proposed SSP method is capable of determining the ToF of damage-scattered $S_0$ mode accurately even though the captured wave signal is severely contaminated by broadband noise, leading to the successful identification of damage (within an error on the order of the damage size) using a triangulation algorithm.

키워드

참고문헌

  1. Benammar, A., Drai, R. and Guessoum, A. (2008), "Detection of delamination defects in CFRP materials using ultrasonic signal processing", Ultrasonics, 48(8), 731-738. https://doi.org/10.1016/j.ultras.2008.04.005
  2. Bosch, I. and Vergara, L. (2008), "Normalized split-spectrum: a detection approach", Ultrasonics, 48(1), 56-65. https://doi.org/10.1016/j.ultras.2007.09.003
  3. Bosch, I. and Vergara, L. (2005), "New insights and extensions of split-spectrum algorithms from an optimum distributed detection perspective", Proceedings of the IEEE Ultrasonics Symposium, Polytechnic University of Valencia, September.
  4. Diamanti, K., Soutis, C. and Hodgkinson, J.M. (2005), "Lamb waves for the non-destructive inspection of monolithic and sandwich composite beams", Compos. Part A - Appl S., 36(2), 189-195. https://doi.org/10.1016/j.compositesa.2004.06.013
  5. Ericsson, L. and Stepinski, T. (1992), "Cut spectrum processing: a novel signal processing algorithm for ultrasonic flaw detection", NDT & E. Int., 25(2), 59-64. https://doi.org/10.1016/0963-8695(92)90495-3
  6. Giurgiutiu, V. (2005), "Tuned lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring", J. Intell. Mater. Syst. Struct., 16(4), 291-305. https://doi.org/10.1177/1045389X05050106
  7. Ip, K.H., Tse, P.W. and Tam, H.Y. (2004), "Extraction of patch-induced Lamb waves using a wavelet transform", Smart Mater. Struct., 13(4), 861-872. https://doi.org/10.1088/0964-1726/13/4/024
  8. Karpur, P. and Canelones, O.J. (1992), "Split spectrum processing: A new filtering approach for improved signalto- noise ratio enhancement of ultrasonic signals", Ultrasonics, 30(6), 351-357. https://doi.org/10.1016/0041-624X(92)90090-9
  9. Kessler, S.S., Spearing, S.M. and Soutis, C. (2002), "Damage detection in composite materials using Lamb wave methods", Smart Mater. Struct., 11(2), 269-278. https://doi.org/10.1088/0964-1726/11/2/310
  10. Li, F., Meng, G., Kageyama, K., Su, Z. and Ye, L. (2009), "Optimal mother Wavelet selection for lamb wave analyses", J. Intell. Mater. Syst. Struct., 20(10), 1147-1161. https://doi.org/10.1177/1045389X09102562
  11. Lu, Y., Ye, L., Wang, D., Zhou, L. and Cheng, L. (2010), "Piezo-activated guided wave propagation and interaction with damage in tubular structures", Smart. Struct. Syst., 6(7), 835-849. https://doi.org/10.12989/sss.2010.6.7.835
  12. Lu, Y., Ye, L., Wang, D, Wang, X. and Su, Z. (2010), "Conjunctive and compromised data fusion schemes for identification of multiple notches in an aluminium plate using lamb wave signals", IEEE T. Ultrason. Ferr., 57(9), 2005-2016. https://doi.org/10.1109/TUFFC.2010.1648
  13. Michaels, J.E. (2008), "Detection, localization and characterization of damage in plates with an in situ array of spatially distributed ultrasonic sensors", Smart Mater. Struct., 17(3), 035035. https://doi.org/10.1088/0964-1726/17/3/035035
  14. Pardo, E., San Emeterio, J.L., Rodriguez, M.A. and Ramos, A. (2006), "Noise reduction in ultrasonic NDT using undecimated wavelet transforms", Ultrasonics, 44(1), 1063-1067. https://doi.org/10.1016/j.ultras.2006.05.101
  15. Quek, S.T., Tua, P.S. and Wang, Q. (2003), "Detecting anomalies in beams and plate based on the Hilbert-Huang transform of real signals", Smart Mater. Struct., 12(3), 447-460. https://doi.org/10.1088/0964-1726/12/3/316
  16. Su, Z., Yang, C., Pan, N., Ye, L. and Zhou, L.M. (2007), "Assessment of delamination in composite beams using shear horizontal (SH) wave mode", Compos. Sci. Technol., 67(2), 244-251. https://doi.org/10.1016/j.compscitech.2006.08.019
  17. Su, Z. and Ye, L. (2009). Identification of Damage Using Lamb Waves: From Fundamentals to Applications, Springer-Verlag Berlin, Heidelberg.
  18. Su, Z., Ye, L. and Bu, X. (2002), "A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers", Compos. Struct., 57(1-4), 465-471. https://doi.org/10.1016/S0263-8223(02)00115-0
  19. Wang, L. and Yuan, F.G. (2007), "Active damage localization technique based on energy propagation of Lamb waves", Smart. Struct. Syst., 3(2), 201-217. https://doi.org/10.12989/sss.2007.3.2.201
  20. Wang, L. and Yuan, F.G. (2007), "Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments", Compos. Sci. Technol., 67(7-8), 1370-1384. https://doi.org/10.1016/j.compscitech.2006.09.023

피인용 문헌

  1. Non-contact damage monitoring technique for FRP laminates using guided waves vol.17, pp.5, 2016, https://doi.org/10.12989/sss.2016.17.5.795
  2. Split-spectrum processing technique for SNR enhancement of ultrasonic guided wave vol.83, 2018, https://doi.org/10.1016/j.ultras.2017.08.002
  3. A damage localization method based on the singular value decomposition (SVD) for plates vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.621
  4. Bayesian uncertainty quantification for guided-wave-based multidamage localization in plate-like structures using Gibbs sampling vol.20, pp.6, 2012, https://doi.org/10.1177/1475921720979352