DOI QR코드

DOI QR Code

Seismic safety assessment of eynel highway steel bridge using ambient vibration measurements

  • 투고 : 2012.02.29
  • 심사 : 2012.06.21
  • 발행 : 2012.08.25

초록

In this paper, it is aimed to determine the seismic behaviour of highway bridges by nondestructive testing using ambient vibration measurements. Eynel Highway Bridge which has arch type structural system with a total length of 216 m and located in the Ayvaclk county of Samsun, Turkey is selected as an application. The bridge connects the villages which are separated with Suat U$\breve{g}$urlu Dam Lake. A three dimensional finite element model is first established for a highway bridge using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three orthogonal directions. The ambient vibration measurements are carried out on the bridge deck under natural excitation such as traffic, human walking and wind loads using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification techniques are employed namely, Enhanced Frequency Domain Decomposition technique in the frequency domain and Stochastic Subspace Identification technique in time domain. Analytical and experimental dynamic characteristic are compared with each other and finite element model of the bridge is updated by changing of boundary conditions to reduce the differences between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of highway bridges. After finite element model updating, maximum differences between the natural frequencies are reduced averagely from 23% to 3%. The updated finite element model reflects the dynamic characteristics of the bridge better, and it can be used to predict the dynamic response under complex external forces. It is also helpful for further damage identification and health condition monitoring. Analytical model of the bridge before and after model updating is analyzed using 1992 Erzincan earthquake record to determine the seismic behaviour. It can be seen from the analysis results that displacements increase by the height of bridge columns and along to middle point of the deck and main arches. Bending moments have an increasing trend along to first and last 50 m and have a decreasing trend long to the middle of the main arches.

키워드

참고문헌

  1. Allemang, R.J. (2003), "The modal assurance criterion: twenty years of use and abuse", J. Sound Vib., 37(8), 14- 23.
  2. Altunl lk, A.C., Bayraktar, A., Sevim, B. and Ate , S. (2011), "Ambient vibration based seismic evaluation of isolated gulburnu highway bridge", Soil Dyn. Earthq. Eng., 31(11), 1496-1510. https://doi.org/10.1016/j.soildyn.2011.05.020
  3. Altunl lk, A.C., Bayraktar, A., Sevim, B. and Ozdemir, H. (2011), "Experimental and analytical system identification of eynel arch type steel highway bridge", J. Constr. Steel Res., 67(12), 1912-1921. https://doi.org/10.1016/j.jcsr.2011.06.008
  4. Altunl lk, A.C., Bayraktar, A., Sevim, B., Kartal, M.E. and Adanur, S. (2010), "Finite element model updating of an arch type steel laboratory bridge model using semi-rigid connection", Steel Compos. Struct., 10(6), 543- 563.
  5. Bayraktar, A., Altunl lk, A.C., Sevim, B. and Turker, T. (2010), "Earthquake behaviour of komurhan highway bridge using validated finite element model", J. Test. Eval., 38(4), 467-481.
  6. Bayraktar, A., Sevim, B. and Altunl lk, A.C. (2011), "Finite element model updating effects on nonlinear seismic response of arch dam-reservoir-foundation systems", Finite Elemen. Anal. Des., 47(2), 85-97. https://doi.org/10.1016/j.finel.2010.09.005
  7. Bendat, J.S. and Piersol, A.G. (2004), Random data: analysis and measurement procedures, John Wiley and Sons, USA.
  8. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference, San Antonio, USA.
  9. Ewins, D.J. (1984), Modal testing: theory and practice, Letchworth, Hertfordshire, England: Research Studies Press, New York.
  10. Feng, M.Q., Kim, D.K., Yi, J.H. and Chen, Y. (2004), "Baseline models for bridge performance monitoring", J. Eng. Mech.- ASCE, 130(5), 562-569. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(562)
  11. GDH. (2011), General directorate of highways, Ankara, Turkey.
  12. Heylen, W., Stefan, L. and Sas, P. (2007), Modal analysis theory and testing, Katholieke Universiteit Leuven, Faculty of Engineering, Department of Mechanical Engineering, Leuven, Belgium.
  13. Jacobsen, N.J., Andersen, P. and Brincker, R. (2006), "Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in operational modal analysis", Proceedings of the ISMA2006: International Conference on Noise & Vibration Engineering, Leuven, Belgium.
  14. Jaishi, B. and Ren, W.X. (2005), "Structural finite element model updating using ambient vibration test results", J. Struct. Eng. - ASCE, 131(4), 617-628. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(617)
  15. Juang, J.N. (1994), Applied system identification, Englewood Cliffs (NJ): Prentice-Hall Inc.
  16. Kwasniewski, L., Wekezer, J., Roufa, G., Hongyi, L., Ducher, J. and Malachowski, J. (2006), "Experimental evaluation of dynamic effects for a selected highway bridge", J. Perform. Constr. Fac., 20(3), 253-260. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:3(253)
  17. Liu, C., DeWolf, J.T. and Kim, J.H. (2009), "Development of a baseline for structural health monitoring for a curved post-tensioned concrete box girder bridge", Eng. Struct., 31(12), 3107-3115. https://doi.org/10.1016/j.engstruct.2009.08.022
  18. OMA. (2006), Operational modal analysis. release 4.0, Structural Vibration Solutions A/S; Denmark.
  19. Paz, M. and Leigh, W. (2001), Integrated matrix analysis of structures, Theory and Computation, Kluwer Academic Publishers, Boston, London.
  20. PEER. (2011), Pacific earthquake engineering research centre, http://peer.berkeley.edu/smcat/Peeters, B. (2000), System identification and damage detection in civil engineering, PhD Thesis, K.U, Leuven, Belgium.
  21. Peeters, B. and De Roeck, G. (1999), "Reference based stochastic subspace identification in civil engineering", Proceedings of the 2nd International Conference on Identification in Engineering Systems, Swansea, UK.
  22. Picozzi, M., Milkereit, C., Zulfikar, C., Fleming, K., Ditommaso, R., Erdik, M., Zschau, J., Fischer, J., Pafak, E., Ozel, O. and Apaydyn, N. (2010), "Wireless technologies for the monitoring of strategic civil infrastructures: an ambient vibration tests on the fatih sultan mehmet suspension bridge in istanbul, Turkey", Bull. Earthq, Eng., 8(3), 671-691. https://doi.org/10.1007/s10518-009-9132-7
  23. Prokon. (2011), Prokon engineering and consultancy Inc., Ankara, Turkey.
  24. PULSE. (2006), Labshop, Version 11.2.2. Bruel and Kjaer, Sound and Vibration Measurement A/S; Denmark.
  25. Rainieri, C., Fabbrocino, G., Cosenza, E. and Manfredi, G. (2007), "Implementation of OMA procedures using labview: theory and application", Proceedings of the 2nd International Operational Modal Analysis Conference, 30 April-2 May, Copenhagen, Denmark, 1-13.
  26. Ren, W.X., Zhao, T. and Harik, I.E. (2004), "Experimental and analytical modal analysis of steel arch bridge", J. Struct. Eng. - ASCE, 130(7), 1022-1031. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:7(1022)
  27. Roeck, G.D., Peeters, B. and Ren, W.X. (2000), "Benchmark study on system identification through ambient vibration measurements", Proceedings of the 18th International Modal Analysis Conference, San Antonio, USA, 1106-1112.
  28. SAP2000. (2008), Integrated finite element analysis and design of structures, Computers and Structures Inc., Berkeley, California, USA.
  29. Setra. (2006), Footbridges Assessment of Vibrational Behaviour of Footbridges under Pedestrian Loading, Technical Guide Published by the Setra, French Association of Civil Engineering, France.
  30. Van Overschee, P. and De Moor, B. (1996), Subspace identification for linear systems: theory, implementation and applications, Kluwer Academic Publishers, Dordrecht, Netherlands.
  31. Whelan, M.J., Gangone, M.V., Janoyan, K.D. and Jha, R. (2009), "Real-time wireless vibration monitoring for operational modal analysis of an integral abutment highway bridge", Eng. Struct., 31(10), 2224-2235. https://doi.org/10.1016/j.engstruct.2009.03.022
  32. Yu, D.J. and Ren, W.X. (2005), "EMD-based stochastic subspace identification of structures from operational vibration measurements", Eng. Struct., 27(12), 1741-1751. https://doi.org/10.1016/j.engstruct.2005.04.016
  33. Zivanovic, S., Pavic, A. and Reynolds, P. (2006), "Modal testing and fe model tuning of a lively footbridge structure", Eng. Struct., 28(6), 857-868. https://doi.org/10.1016/j.engstruct.2005.10.012
  34. Zivanovic, S., Pavic, A. and Reynolds, P. (2007), "Finite element modelling and updating of a lively footbridge: the complete process", J. Sound Vib., 301(1-2), 126-145. https://doi.org/10.1016/j.jsv.2006.09.024

피인용 문헌

  1. Displacement estimation of bridge structures using data fusion of acceleration and strain measurement incorporating finite element model vol.15, pp.3, 2015, https://doi.org/10.12989/sss.2015.15.3.645
  2. Constructing the mode shapes of a bridge from a passing vehicle: a theoretical study vol.13, pp.5, 2014, https://doi.org/10.12989/sss.2014.13.5.797
  3. Extension of indirect displacement estimation method using acceleration and strain to various types of beam structures vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.699
  4. Ambient vibration testing of existing buildings: Experimental, numerical and code provisions vol.10, pp.4, 2018, https://doi.org/10.1177/1687814018772718
  5. Structural response of historical masonry arch bridges under different arch curvature considering soil-structure interaction vol.18, pp.2, 2012, https://doi.org/10.12989/gae.2019.18.2.141
  6. Finite-Element Model Updating and Dynamic Responses of Reconstructed Historical Timber Bridges using Ambient Vibration Test Results vol.34, pp.1, 2020, https://doi.org/10.1061/(asce)cf.1943-5509.0001344
  7. Bridge Displacement Estimation Using a Co-Located Acceleration and Strain vol.20, pp.4, 2012, https://doi.org/10.3390/s20041109
  8. Extraction of bridge information based on the double-pass double-vehicle technique vol.25, pp.6, 2012, https://doi.org/10.12989/sss.2020.25.6.679