DOI QR코드

DOI QR Code

Solar-powered multi-scale sensor node on Imote2 platform for hybrid SHM in cable-stayed bridge

  • Ho, Duc-Duy (Department of Ocean Eng., Pukyong National University) ;
  • Lee, Po-Young (Department of Ocean Eng., Pukyong National University) ;
  • Nguyen, Khac-Duy (Department of Ocean Eng., Pukyong National University) ;
  • Hong, Dong-Soo (Department of Ocean Eng., Pukyong National University) ;
  • Lee, So-Young (Department of Ocean Eng., Pukyong National University) ;
  • Kim, Jeong-Tae (Department of Ocean Eng., Pukyong National University) ;
  • Shin, Sung-Woo (Department of Safety Eng., Pukyong National University) ;
  • Yun, Chung-Bang (Department of Civil and Environmental Eng., KAIST) ;
  • Shinozuka, Masanobu (Department of Civil and Environmental Eng., Univ. of California)
  • 투고 : 2011.11.08
  • 심사 : 2012.01.30
  • 발행 : 2012.02.25

초록

In this paper, solar-powered, multi-scale, vibration-impedance sensor node on Imote2 platform is presented for hybrid structural health monitoring (SHM) in cable-stayed bridge. In order to achieve the objective, the following approaches are proposed. Firstly, vibration- and impedance-based hybrid SHM methods are briefly described. Secondly, the multi-scale vibration and impedance sensor node on Imote2-platform is presented on the design of hardware components and embedded software for vibration- and impedance-based SHM. In this approach, a solar-powered energy harvesting is implemented for autonomous operation of the smart sensor nodes. Finally, the feasibility and practicality of the smart sensor-based SHM system is evaluated on a full-scale cable-stayed bridge, Hwamyung Bridge in Korea. Successful level of wireless communication and solar-power supply for smart sensor nodes are verified. Also, vibration and impedance responses measured from the target bridge which experiences various weather conditions are examined for the robust long-term monitoring capability of the smart sensor system.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Adams, R.D., Cawley, P., Pye, C.J. and Stone, B.J. (1978), "A vibration technique for nondestructive assessing the integrity of structures", J. Mech. Eng. Sci., 20(2), 93-100. https://doi.org/10.1243/JMES_JOUR_1978_020_016_02
  2. Analog Devices (2010), "Datasheet of AD5933", Available at http://www.analog.com.
  3. Brincker, R., Zhang. L. and Andersen, P. (2001), "Modal identification of output-only using frequency domain decomposition", Smart Mater. Struct., 10(3), 441-445. https://doi.org/10.1088/0964-1726/10/3/303
  4. Cho, S., Jo, H., Jang, S., Park, J., Jung, H.J., Yun, C.B., Spencer, Jr, B.F. and Seo., J.W. (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: data analyses", Smart Struct. Syst., 6(5-6), 461-480. https://doi.org/10.12989/sss.2010.6.5_6.461
  5. Clough, R.W. and Penzien, J. (1993), Dynamics of structures, 2nd Ed., McGraw-Hill.
  6. Crossbow Technology (2007), "Imote2 hardware reference manual, revision A", Available at http://www.xbow.com.
  7. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib., 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  8. Farrar, C.R. (2001), Historical overview of structural health monitoring, Lecture Notes on Structural Health Monitoring Using Statistical Pattern Recognition, Los Alamos Dynamics, Los Alamos, NM.
  9. Illinois Structural Health Monitoring Project (2011), Imote2 for Structural Health Monitoring: User's Guide, University of Illinois at Urbana-Champaign
  10. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice, J.A., Sim, S.H., Jung, H.J., Yun, C.B., Spencer, Jr, B.F. and Agha, G. (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation", Smart Struct. Syst., 6(5-6), 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  11. Jo, H., Rice, J.A., Spencer, B.F. and Nagayama, T. (2010), "Development of a high-sensitivity accelerometer board for structural health monitoring", Proceedings of the SPIE, San Diego, USA.
  12. Kim, J.T., Park, J.H. and Lee, B.J. (2006), "Vibration-based damage monitoring in model plate-girder bridges under uncertain temperature conditions", Eng. Struct., 29(7), 1354-1365.
  13. Kim, J.T., Park, J.H., Hong, D.S. and Ho, D.D. (2011), "Hybrid acceleration-impedance sensor nodes on Imote2- platform for damage monitoring in steel girder connections", Smart Struct. Syst., 7(5), 393-416. https://doi.org/10.12989/sss.2011.7.5.393
  14. Kim, J.T., Park, J.H., Hong, D.S. and Park, W.S. (2010), "Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches", Eng. Struct., 32(1), 115-128. https://doi.org/10.1016/j.engstruct.2009.08.021
  15. Koo, K.Y. (2008), Structural health monitoring methods for bridges using ambient vibration and impedance measurements, Doctoral Dissertation, Korea Advanced Institute of Science and Technology, Deajeon. Korea.
  16. Liang, C., Sun, F.P. and Rogers, C.A. (1996), "Electro-mechanical impedance modeling of active material systems", Smart Mater. Struct., 5(2), 171-186. https://doi.org/10.1088/0964-1726/5/2/006
  17. Lynch, J.P., Wang, W., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the Geumdang bridge using a dense network of high-resolution wireless sensors", Smart Mater. Struct., 15(6), 1561-1575. https://doi.org/10.1088/0964-1726/15/6/008
  18. Mascarenas, D.L., Todd, M.D., Park, G., and Farrar, C.R., (2007), "Development of an impedance-based wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145. https://doi.org/10.1088/0964-1726/16/6/016
  19. Memsic Co. (2010), "Datasheet of ISM400", Available at http://www.memsic.com.
  20. Miller, T.I., Spencer, B.F., Li, J. and Jo, H. (2010), Solar energy harvesting and software enhancements for autonomous wireless smart sensor networks, NSEL Report Series, NSEL-022.
  21. Nagayama, T., Spencer, B.F. and Rice, J.A. (2009), "Autonomous decentralized structural health monitoring using smart sensors", Struct. Health Monit., 16, 842-859.
  22. Park, G., Kabeya, K., Cudney., H.H. and Inman, D.J. (1999), "Impedance-based structural health monitoring for temperature varying applications", JSME Int. J. A-Solid M., 42(2), 249-258. https://doi.org/10.1299/jsmea.42.249
  23. Park, G., Sohn, H., Farrar, C. and Inman, D. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib., 35, 451-463. https://doi.org/10.1177/05831024030356001
  24. Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, J.P. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(5-6), 711-730. https://doi.org/10.12989/sss.2010.6.5_6.711
  25. Raghavan, A. and Cesnik, E.S. (2007), "Review of guided-wave structural health monitoring", Shock Vib., 39(2), 91-114. https://doi.org/10.1177/0583102406075428
  26. Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, Jr, B.F., Agha, G. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. https://doi.org/10.12989/sss.2010.6.5_6.423
  27. Shimada, T. (1995), A study on the maintenance and management of the tension measurement for the cable of bridge, Ph.D. Dissertation, Kobe University, Japan.
  28. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), A review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS, Los Alamos, NM.
  29. Spencer, B.F. and Cho, S. (2011), "Wireless smart sensor technology for monitoring civil infrastructure: Technological developments and full-scale applications", Proceeding of the World Congress on Advances in Structural Engineering and Mechanics (ASEM'11 Plus), Seoul, Korea.
  30. Spencer, B.F., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Health Monit., 11(4), 349-368. https://doi.org/10.1002/stc.48
  31. Straser, E.G. and Kiremidjian, A.S. (1998), A modular, wireless damage monitoring system for structure, Technical Report 128, John A. Blume Earthquake Engineering Center, Stanford University, Stanford, CA.
  32. Stubbs, N. and Kim, J.T. (1996), "Damage localization in structures without baseline modal parameters", AIAA J., 34(8), 1644-1649. https://doi.org/10.2514/3.13284
  33. Sun, F.P., Chaudhry, Z., Rogers, C.A. and Majmundar, M. (1995), "Automated real-time structure health monitoring via signature pattern recognition", Proceedings of the SPIE, San Diego, USA.
  34. Yi, J.H. and Yun, C.B. (2004), "Comparative study on modal identification methods uing output-only information", Struct. Eng. Mech., 17(7), 927-944.
  35. Zui, H., Shinke, T. and Namita, Y. (1996), "Practical formulas for estimation of cable tension by vibration method", J. Struct. Eng - ASCE, 122(6), 651-656. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(651)

피인용 문헌

  1. Traffic Safety Evaluation for Railway Bridges Using Expanded Multisensor Data Fusion vol.31, pp.10, 2016, https://doi.org/10.1111/mice.12210
  2. Repetitive model refinement for structural health monitoring using efficient Akaike information criterion vol.15, pp.5, 2015, https://doi.org/10.12989/sss.2015.15.5.1329
  3. Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.881
  4. Temperature-Compensated Damage Monitoring by Using Wireless Acceleration-Impedance Sensor Nodes in Steel Girder Connection vol.8, pp.9, 2012, https://doi.org/10.1155/2012/167120
  5. Field Implementation of Wireless Vibration Sensing System for Monitoring of Harbor Caisson Breakwaters vol.8, pp.12, 2012, https://doi.org/10.1155/2012/597546
  6. Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.381
  7. Development of a Multitype Wireless Sensor Network for the Large-Scale Structure of the National Stadium in China vol.9, pp.12, 2013, https://doi.org/10.1155/2013/709724
  8. Direct simulation of the tensioning process of cable-stayed bridges vol.121, 2013, https://doi.org/10.1016/j.compstruc.2013.03.010
  9. Wind and traffic-induced variation of dynamic characteristics of a cable-stayed bridge - benchmark study vol.17, pp.3, 2016, https://doi.org/10.12989/sss.2016.17.3.491
  10. System identification of a cable-stayed bridge using vibration responses measured by a wireless sensor network vol.11, pp.5, 2013, https://doi.org/10.12989/sss.2013.11.5.533
  11. Remote structural health monitoring systems for next generation SCADA vol.11, pp.5, 2013, https://doi.org/10.12989/sss.2013.11.5.511
  12. FOS-Based Prestress Force Monitoring and Temperature Effect Estimation in Unbonded Tendons of PSC Girders vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000608
  13. Optimal Sensor Placement for Stay Cable Damage Identification of Cable-Stayed Bridge under Uncertainty vol.9, pp.12, 2013, https://doi.org/10.1155/2013/361594
  14. Wireless sensor network for decentralized damage detection of building structures vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.399
  15. Real-time remote monitoring: the DuraMote platform and experiments towards future, advanced, large-scale SCADA systems vol.11, pp.4, 2015, https://doi.org/10.1080/15732479.2014.951861
  16. Estimation of flexibility matrix of beam structures using multisensor fusion vol.1, pp.2, 2016, https://doi.org/10.1080/24705314.2016.1179494
  17. Wireless monitoring of typhoon-induced variation of dynamic characteristics of a cable-stayed bridge vol.20, pp.2, 2015, https://doi.org/10.12989/was.2015.20.2.293
  18. Rapid full-scale expansion joint monitoring using wireless hybrid sensor vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.415
  19. Structural identification of cable-stayed bridge under back-to-back typhoons by wireless vibration monitoring vol.88, 2016, https://doi.org/10.1016/j.measurement.2016.03.032
  20. Recent R&D activities on structural health monitoring in Korea vol.3, pp.1, 2016, https://doi.org/10.12989/smm.2016.3.1.091
  21. Simplified planar model for damage estimation of interlocked caisson system vol.12, pp.3_4, 2013, https://doi.org/10.12989/sss.2013.12.3_4.441
  22. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  23. Advances and challenges in impedance-based structural health monitoring vol.4, pp.4, 2012, https://doi.org/10.12989/smm.2017.4.4.301
  24. PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.057
  25. A New Insight to Vibration Characteristics of Spans under Random Moving Load: Case Study of 38 Bridges in Ho Chi Minh City, Vietnam vol.2020, pp.None, 2012, https://doi.org/10.1155/2020/1547568
  26. A statistical approach for evaluating crack defects in structures under dynamic responses vol.36, pp.2, 2012, https://doi.org/10.1080/10589759.2019.1699086
  27. Structural health monitoring of bridge spans using Moment Cumulative Functions of Power Spectral Density (MCF-PSD) and deep learning vol.17, pp.1, 2012, https://doi.org/10.3233/brs-210183
  28. Anchor Force Monitoring Using Impedance Technique with Single-Point Mount Lead-Zirconate-Titanate Interface: A Feasibility Study vol.11, pp.9, 2012, https://doi.org/10.3390/buildings11090382
  29. A Low-Cost Prestress Monitoring Method for Post-Tensioned RC Beam Using Piezoelectric-Based Smart Strand vol.11, pp.10, 2012, https://doi.org/10.3390/buildings11100431