DOI QR코드

DOI QR Code

Damage localization in plate-like structure using built-in PZT sensor network

  • Liu, Xinglong (National Engineering Laboratory for System Integration of High Speed Train (South), CSR Qingdao Sifang, Co., Ltd.) ;
  • Zhou, Chengxu (Department of Mechanical Engineering, Engineering Faculty, Yamaguchi University) ;
  • Jiang, Zhongwei (Department of Mechanical Engineering, Engineering Faculty, Yamaguchi University)
  • 투고 : 2010.05.08
  • 심사 : 2011.11.08
  • 발행 : 2012.01.25

초록

In this study, a Lamb-wave based damage detection approach is proposed for damage localization in plate. A sensor network consisting of three PZT wafer type actuators/sensors is used to generate and detect Lamb waves. To minimize the complication resulted from the multimode and dispersive characteristics of Lamb waves, the fundamental symmetric Lamb mode, $S_0$ is selectively generated through designing the excitation frequency of the narrowband input signal. A damage localization algorithm based upon the configuration of the PZT sensor network is developed. Time-frequency analysis method is applied to purify the raw signal and extract damage features. Experimental result obtained from aluminum plate verified the proposed damage localization approach.

키워드

참고문헌

  1. Achenbach, J.D. (1984), Wave Propagation in Elastic Solids, North-Holland, New York.
  2. Giurgiutiu, V., Zagrai, A. and Bao, J.J. (2002), "Piezoelectric wafer embedded active sensors for aging aircraft structural health monitoring", Struct. Health Monit., 1(1), 41-61. https://doi.org/10.1177/147592170200100104
  3. Giurgiutiu, V. (2005), "Tuned Lamb wave excitation and detection with piezoelectric active sensors for structural health monitoring", J. Intel. Mat. Syst. Str., 16(4), 291-305. https://doi.org/10.1177/1045389X05050106
  4. Grondel, S., Paget, C., Delebarre, C., Assaad, J. and Levin, K. (2002), "Design of optimal configuration for generating A0 Lamb mode in a composite plates using peizoceramic transducers", J. Acoust. Soc. Am., 112, 84-90. https://doi.org/10.1121/1.1481062
  5. Hu, N., Shimomukai, T., Fukunaka, H. and Su, Z.Q. (2008), "Damage identification of metallic structure using A0 mode of Lamb waves", Struct. Health Monit., 7, 271-285. https://doi.org/10.1177/1475921708090566
  6. Lin, X. and Yuan, F.G. (2002), "Diagnostic Lamb waves in an integrated piezoelectric sensor/actuator plate: analytical and experimental studies", Smart Mater. Struct., 10(5), 907-913.
  7. Su, Z.Q., Ye, L. and Bu, X.Z. (2002), "A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers", Compos. Struct., 57(1-4), 465-471. https://doi.org/10.1016/S0263-8223(02)00115-0
  8. Tua, P.S., Quek, S.T. and Wang, Q. (2004), "Detection of cracks in plates using piezo-actuated Lamb waves", Smart Mater. Struct., 13(4), 643-660. https://doi.org/10.1088/0964-1726/13/4/002
  9. Viktorov, I.A. (1967), Rayleigh and Lamb waves, physical theory and applications, Plenum, New York.
  10. Wang, C.S.F. and Chang, F.K. (2001), "Structural health monitoring from fiber-reinforced composites to steelreinforced concrete", Smart Mater. Struct., 10(3), 548-552. https://doi.org/10.1088/0964-1726/10/3/318
  11. Wang, L. and Yuan, F.G. (2007), "Active damage localization technique based on energy propagation of Lamb waves", Smart Struct. Syst., 3(2), 201-207. https://doi.org/10.12989/sss.2007.3.2.201
  12. Wieslaw, O, Pawel, K., Pawel, M. and Tomasz, W. (2009), "Damage localization in plate-like structures based on PZT sensors", Mech. Syst. Signal Pr., 23(6), 1805-1829. https://doi.org/10.1016/j.ymssp.2008.10.011
  13. Yan, Z.H., Miyamoto, A. and Jiang, Z.W. (2009), "Frequency slice wavelet transform for transient vibration response analysis", Mech. Syst. Signal Pr., 23(5), 1474-1489. https://doi.org/10.1016/j.ymssp.2009.01.008

피인용 문헌

  1. Perturbation analysis for robust damage detection with application to multifunctional aircraft structures vol.16, pp.3, 2015, https://doi.org/10.12989/sss.2015.16.3.435
  2. Linear and Nonlinear Guided Wave Imaging of Impact Damage in CFRP Using a Probabilistic Approach vol.9, pp.12, 2016, https://doi.org/10.3390/ma9110901
  3. Triboelectric Nanogenerator Built on Suspended 3D Spiral Structure as Vibration and Positioning Sensor and Wave Energy Harvester vol.7, pp.11, 2013, https://doi.org/10.1021/nn405209u
  4. Comprehensive comparison of macro-strain mode and displacement mode based on different sensing technologies vol.50-51, 2015, https://doi.org/10.1016/j.ymssp.2014.05.011
  5. Application of laser Doppler vibrometry for ultrasonic velocity assessment in a composite panel with defect vol.184, 2018, https://doi.org/10.1016/j.compstruct.2017.10.059
  6. Optimizing location of damage within an enclosed area defined by an algorithm based on the Lamb wave response data vol.120, 2017, https://doi.org/10.1016/j.apacoust.2017.01.014
  7. Non-contact damage monitoring technique for FRP laminates using guided waves vol.17, pp.5, 2016, https://doi.org/10.12989/sss.2016.17.5.795
  8. Distributed parameter model and experimental validation of a compressive-mode energy harvester under harmonic excitations vol.6, pp.8, 2016, https://doi.org/10.1063/1.4961232
  9. Piezoelectricity in PbZrxTi1-xO3Studied by Density-Functional Perturbation Theory Supercell Calculations vol.52, pp.9R, 2013, https://doi.org/10.7567/JJAP.52.091101
  10. Damage evaluation and failure mechanism analysis of steel tube confined reinforced-concrete columns by acoustic emission technology vol.15, pp.11, 2018, https://doi.org/10.1590/1679-78255339
  11. Damage identification in multi-step waveguides using Lamb waves and scattering coefficients vol.88, pp.6, 2018, https://doi.org/10.1007/s00419-018-1355-0
  12. Identification of damage in composite structures using Gaussian mixture model-processed Lamb waves vol.27, pp.4, 2012, https://doi.org/10.1088/1361-665x/aaaf96