DOI QR코드

DOI QR Code

Experimental and numerical investigations on the ratcheting characteristics of cylindrical shell under cyclic axial loading

  • Shariati, M. (Department of Mechanical Engineering, Shahrood University of Technology) ;
  • Hatami, H. (Department of Mechanical Engineering, Shahrood University of Technology) ;
  • Torabi, H. (Young Researchers Club, Mashhad Branch, Islamic Azad University) ;
  • Epakchi, H.R. (Department of Mechanical Engineering, Shahrood University of Technology)
  • 투고 : 2011.05.29
  • 심사 : 2012.11.08
  • 발행 : 2012.12.25

초록

The ratcheting characteristics of cylindrical shell under cyclic axial loading are investigated. The specimens are subjected to stress-controlled cycling with non-zero mean stress, which causes the accumulation of plastic strain or ratcheting behavior in continuous cycles. Also, cylindrical shell shows softening behavior under symmetric axial strain-controlled loading and due to the localized buckling, which occurs in the compressive stress-strain curve of the shell; it has more residual plastic strain in comparison to the tensile stress-strain hysteresis curve. The numerical analysis was carried out by ABAQUS software using hardening models. The nonlinear isotropic/kinematic hardening model accurately simulates the ratcheting behavior of shell. Although hardening models are incapable of simulating the softening behavior of the shell, this model analyzes the softening behavior well. Moreover, the model calculates the residual plastic strain close to the experimental data. Experimental tests were performed using an INSTRON 8802 servo-hydraulic machine. Simulations show good agreement between numerical and experimental results. The results reveal that the rate of plastic strain accumulation increases for the first few cycles and then reduces in the subsequent cycles. This reduction is more rapid for numerical results in comparison to experiments.

키워드

참고문헌

  1. ABAQUS Analysis User's Manual (2009), v6.9.1 Section 19.2.2: Models for Metals Subjected to Cyclic Loading.
  2. ABAQUS Theory Manual (2009), v6.9.1 Section 4.3.5: Models for Metals Subjected to Cyclic Loading.
  3. ASTM A370-05, Standard Test Methods and Definitions for Mechanical Testing of Steel Products.
  4. Boller, C. and Seeger, T. (1987), Materials Data for Cyclic Loading, Amsterdam, Elsevier.
  5. Chang, K.H., Pan, W.F. and Lee, K.L. (2008), "Mean moment effect on circular thin-walled tubes under cyclic bending", Struct. Eng. Mech., 28(5), 495-514. https://doi.org/10.12989/sem.2008.28.5.495
  6. Chang, K.H. and Pan, W.F. (2009), "Buckling life estimation of circular tubes under cyclic bending", Int. J. Solids Struct., 46(2), 254-270. https://doi.org/10.1016/j.ijsolstr.2008.08.024
  7. Chaboche, J.L. and Lemaitre, J. (1990), Mechanics of Solid Materials, Cambridge University Press.
  8. Dong, J., Wang, S. and Lu, X. (2006), "Simulations of the hysteretic behavior of thin-wall cold-formed steel members under cyclic uniaxial loading", Struct. Eng. Mech., 24(3), 323-337. https://doi.org/10.12989/sem.2006.24.3.323
  9. Jiao, R. and Kyriakides, S. (2009), "Ratcheting, wrinkling and collapse of tubes under axial cycling", Int. J. Solids Struct., 46(14-15), 2856-2870. https://doi.org/10.1016/j.ijsolstr.2009.03.018
  10. Kulkarni, S.C., Desai, Y.M., Kant, T., Reddy, G.R., Parulekar, Y. and Vaze, K.K. (2003), "Uniaxial and biaxial ratchetting study of SA333 Gr.6 steel at room temperature", Int. J. Press. Vessel. Pip., 80, 179-185. https://doi.org/10.1016/S0308-0161(03)00029-2
  11. Kulkarni, S.C., Desai, Y.M., Kant, T., Reddy, G.R., Prasad, P., Vaze, K.K. and Gupta, C. (2004), "Uniaxial and biaxial ratchetting in piping materials-experiments and analysis", Int. J. Press. Vessel. Pip., 81, 609-617. https://doi.org/10.1016/j.ijpvp.2004.04.001
  12. Lee, K.L. (2010), "Mechanical behavior and buckling failure of sharp-notched circular tubes under cyclic bending", Struct. Eng. Mech., 34(3), 367-376. https://doi.org/10.12989/sem.2010.34.3.367
  13. Nip, K.H., Gardner, L. and Elghazouli, A.Y. (2010), "Cyclic testing and numerical modelling of carbon steel and stainless steel tubular bracing members", Eng. Struct., 32, 424-441. https://doi.org/10.1016/j.engstruct.2009.10.005
  14. Owen, D.R.J. and Hinton, F. (1980), Finite Elements in Plasticity - Theory and Practice, Pineridge Press Ltd.
  15. Rahman, S.M., Hassan, T. and Corona, E. (2008), "Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure", Int. J. Plast., 24, 1756-1791. https://doi.org/10.1016/j.ijplas.2008.02.010
  16. Sato, M. and Shimazaki, K. (2011), "Approximate formulation for bifurcation buckling loads of axially compressed cylindrical shells with an elastic core", Int. Multis. Mech., 4(4), 313-320. https://doi.org/10.12989/imm.2011.4.4.313
  17. Shariati, M. and Hatami, H. (2012), "Experimental study of SS304L cylindrical shell with/without cutout under cyclic axial loading", Theo. Appl. Fract. Mech., 58, 35-43. https://doi.org/10.1016/j.tafmec.2012.02.005
  18. Shariati, M., Hatami, H., Yarahmadi, H. and Eipakchi, H.R. (2011), "An experimental study on the ratcheting and fatigue behavior of polyacetal under uniaxial cyclic loading", Mater. Des., 34, 302-312.
  19. Sun, G.Q. and Shang, D.G. (2010), "Prediction of fatigue lifetime under multiaxial cyclic loading using finite element analysis", Mater. Des., 31(1), 126-133. https://doi.org/10.1016/j.matdes.2009.06.046
  20. Yoon, S., Hong, S.G., Lee, S.B. and Kim, B.S. (2003), "Low cyclic fatigue testing of 429EM stainless steel pipe", Int. J. Fatigue, 8(9-11), 1301-1307.
  21. Zakavi, S.J., Zehsaz, M. and Eslami, M.R. (2010), "The ratchetting behavior of pressurized plain pipework subjected to cyclic bending moment with the combined hardening model", Nucl. Eng. Des., 240, 726-737. https://doi.org/10.1016/j.nucengdes.2009.12.012
  22. Zhang, C., Liu, Y. and Goto, Y., (2008), "Plastic buckling of cylindrical shells under transverse loading", Tsinghua Sci. Technol., 13, 202-210. https://doi.org/10.1016/S1007-0214(08)70034-8

피인용 문헌

  1. Treatment of the High Number of Cycles as a Pseudo-Cyclic Creep by Analogy with the Soft Soil Creep Model vol.34, pp.6, 2016, https://doi.org/10.1007/s10706-016-0078-7
  2. Behavior of Sand After a High Number of Cycles Application to Shallow Foundation vol.14, pp.7, 2016, https://doi.org/10.1007/s40999-016-0050-1
  3. Bending ratcheting behavior of pressurized straight Z2CND18.12N stainless steel pipe vol.52, pp.6, 2014, https://doi.org/10.12989/sem.2014.52.6.1135
  4. An investigation of the fatigue of CK45 steel in the as-received state and after pre-fatigue deformation vol.38, pp.4, 2015, https://doi.org/10.1111/ffe.12249
  5. Aspect ratio factor for finite element method analysis of axially symmetric cylindrical shell walls vol.6, pp.4, 2014, https://doi.org/10.3846/2029882X.2014.996255
  6. Ratcheting analysis of joined conical cylindrical shells vol.55, pp.5, 2015, https://doi.org/10.12989/sem.2015.55.5.913
  7. The Assessment of Elastic Follow-Up Effects on Cyclic Accumulation of Inelastic Strain Under Displacement-Control Loading 2017, https://doi.org/10.1007/s40997-017-0089-x
  8. Numerical and Experimental Investigation of SS304L Cylindrical Shell with Cutout Under Uniaxial Cyclic Loading 2019, https://doi.org/10.1007/s40997-017-0120-2
  9. Local ratcheting behavior in notched 1045 steel plates vol.28, pp.1, 2012, https://doi.org/10.12989/scs.2018.28.1.001