DOI QR코드

DOI QR Code

Crack driving force prediction based on finite element analysis using standard models

  • Brnic, Josip (Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka) ;
  • Vukelic, Goran (Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka) ;
  • Turkalj, Goran (Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka)
  • 투고 : 2012.03.06
  • 심사 : 2012.10.24
  • 발행 : 2012.12.10

초록

Effect of different crack sizes on fracture criterion of some engineering materials was investigated in this work. Using finite element (FE) method coupled with a newly developed algorithm, J-integral values for different crack sizes were obtained for single-edge notched bend (SENB) and compact type (CT) specimen. Specimens with initial a/W ratio from 0.25 to 0.75 varying in crack size in steps of 0.125 were investigated. Several different materials, like 20MnMoNi55, 42CrMo4 and 50CrMo4, usually used in engineering structure, were investigated. For one of mentioned materials, numerical results were compared with experimental and their compatibility is visible.

키워드

참고문헌

  1. American Society for Testing and Materials (ASTM) (2005), Standard Test Method for Measurement of Fracture Toughness, E1820, ASTM, Baltimore.
  2. Brnic, J., Canadija, M., Turkalj, G. and Lanc, D. (2010), "50CrMo4 steel-determination of mechanical properties at lowered and elevated temperatures, creep behavior and fracture toughness calculation", J. Eng. Mater. Technol., 132, 021004-1-021004-6. https://doi.org/10.1115/1.4000669
  3. Dense de Araujo, T., Roehl, D. and Martha, L.F. (2008), "An adaptive strategy for elastic-plastic analysis of structures with cracks", J. Braz. Soc. Mech. Sci. Eng., 30(4), 341-350.
  4. Ellerman, A. and Scholtes, B. (2011), "The bauschinger effect in different heat treatment conditions of 42CrMo4", Int. J. Struct. Chang. Solid., 3(1), 1-13.
  5. Kim, Y.J. and Schwalbe, K.H. (2001), "On experimental J estimation equations based on CMOD for SE(B) specimens", J. Test. Eval., 29, 67-71. https://doi.org/10.1520/JTE12393J
  6. Kirk, M.T. and Dodds, R.H., Jr. (1993), "J and CTOD estimation equations for shallow cracks in single edge notch bend specimens", J. Test. Eval., 21, 228-238. https://doi.org/10.1520/JTE11948J
  7. Kozak, V. and Dlouhy, I. (2007), "J-R curve prediction using cohesive model and its sensitivity to a material curve", Transactions of SMiRT 19, Toronto, G06/4.
  8. Margolin, B.Z. and Kostylev, V.I. (1998), "Analysis of biaxial loading effect on fracture toughness of reactor pressure vessel steels", Int. J. Pres. Ves. Pip., 75(8), 589-601. https://doi.org/10.1016/S0308-0161(98)00056-8
  9. Mohammadi, S. (2008), Extended Finite Element Method, Blackwell Publishing, Singapore.
  10. Narasaiah, N., Tarafder, S. and Sivaprasad, S. (2010), "Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel", Mater. Sci. Eng. A, 527, 2408-2411. https://doi.org/10.1016/j.msea.2009.12.011
  11. Premchand, V.P. and Sajikumar, K.S. (2009), "Fracture analysis in adhesive bonded joints with centre crack", Proceedings of the 10th National Conference on Technological Trends, Trivandrum, 1, 45-50.
  12. Rakin, M., Gubeljak, N., Dobrojevic, M. and Sedmak, A. (2008), "Modelling of ductile fracture initiation in strength mismatched welded joint", Eng. Fract. Mech., 75(11), 3499-3510. https://doi.org/10.1016/j.engfracmech.2007.04.026
  13. Rice, J.R. (1968), "A path independent integral and the approximate analysis of strain concentration by notches and cracks", J. Appl. Mech., 35, 379-386. https://doi.org/10.1115/1.3601206
  14. Saxena, S. and Ramakrishnan, N. (2007), "A comparison of Micro, Meso and Macroscale FEM analysis of ductile fracture in a CT specimen", Comp. Mater. Sci., 39(1), 1-7. https://doi.org/10.1016/j.commatsci.2006.01.022
  15. Shen, G. and Tyson, W.R. (2009), "Crack size evaluation using unloading compliance in single-specimen singleedge- notched tension fracture toughness testing", J. Test. Eval., 37(4), 347-357.
  16. Tierean, M. and Baltes, L. (2009), "Computing of stress intensity factor using j-integral method with F.E.A.", Annals of DAAAM 2009 & Proceedings of the 20th Int. DAAAM Symposium, Vienna, 1105-1106.

피인용 문헌

  1. Fracture behaviors of tunnel lining caused by multi-factors: A case study vol.8, pp.4, 2012, https://doi.org/10.12989/acc.2019.8.4.269