DOI QR코드

DOI QR Code

Investigation of the seismic performance of precast segmental tall bridge columns

  • Bu, Z.Y. (Faculty of Architectural, Civil Engineering and Environment, Ningbo University) ;
  • Ding, Y. (Faculty of Architectural, Civil Engineering and Environment, Ningbo University) ;
  • Chen, J. (Architectural Design and Research Institute of Ningbo University Co. Ltd.) ;
  • Li, Y.S. (Faculty of Architectural, Civil Engineering and Environment, Ningbo University)
  • 투고 : 2011.06.19
  • 심사 : 2012.06.01
  • 발행 : 2012.08.10

초록

Precast segmental bridge columns (PSBC) are alternatives for monolithic cast-in-situ concrete columns in bridge substructures, with fast construction speed and structural durability. The analytical tool for common use is demonstrated applicable for seismic performance prediction of PSBCs through experiment conducted earlier. Then the analytical program was used for parameter optimization of PSBC configurations under reversal cyclic loading. Shear strength by pushover analysis was compared with theoretical prediction. Moreover, seismic response of PSBC with energy dissipation (ED) bars was compared with its no ED bar counterpart under three history ground acceleration records. The investigation shows that appropriate ED bar and post-tensioned tendon arrangement is important for higher lateral bearing capacity and good ductility performance of PSBCs.

키워드

참고문헌

  1. AASHTO (2004), AASHTO LRFD Bridge Design Specifications, 3rd Edition, Washington, D.C.
  2. Billington, S.L., Barnes, R.W. and Breen, J.E. (1999), "A precast segmental substructure system for standard bridges", PCI J., 44(4), 56-73.
  3. Billington, S.L. and Yoon, J.K. (2004), "Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete", J. Bridge Eng., 9(4), 353-363. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:4(353)
  4. Chou, C.C. and Chen, Y.C. (2006), "Cyclic tests of post-tensioned precast CFT segmental bridge columns with unbonded strands", Earthq. Eng. Struct. D., 35, 159-175. https://doi.org/10.1002/eqe.512
  5. Chou, C.C. and Hsu, C.P. (2008), "Hysteretic model development and seismic response of unbonded posttensioned precast CFT segmental bridge columns", Earthq. Eng. Struct. D., 37, 919-934. https://doi.org/10.1002/eqe.796
  6. Hewes, J.T. and Priestley, M.J.N. (2002), "Seismic design and performance of precast concrete segmental bridge columns", Rep. No. SSRP-2001/25, Univ. of California, San Diego.
  7. Kim, T.H., Kim, Y.J. and Shin, H.M. (2008), "Seismic performance assessment of reinforced concrete bridge piers supported by laminated rubber bearings", Struct. Eng. Mech., 29(3), 259-278. https://doi.org/10.12989/sem.2008.29.3.259
  8. Kim, T.H., Lee, H.M., Kim, Y.J. and Shin, H.M. (2010), "Performance assessment of precast concrete segmental bridge columns with a shear resistant connecting structure", Eng. Struct., 32, 1292-1303. https://doi.org/10.1016/j.engstruct.2010.01.007
  9. Kwak, H.G. and Shin, D.K. (2009), "An improved pushover analysis procedure for multi-mode seismic performance evaluation of bridges: (1) Introduction to numerical model", Struct. Eng. Mech., 33(2), 215-238. https://doi.org/10.12989/sem.2009.33.2.215
  10. Kwan, W.P. and Billington, S.L. (2003), "Unbonded posttensioned concrete bridge piers. II: Seismic Analyses", J. Bridge Eng., 8(2), 102-111. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:2(102)
  11. Lee, J.H., Ko, S.H. and Choi, J.H. (2004), "Shear strength and capacity protection of RC bridge columns", 2004 ANCER Annual Meeting: Networking of Young Earthquake Engineering Researchers and Professionals, USA, July.
  12. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis of cyclically loaded R.C. plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending", Proceedings of the IABSE Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon.
  13. Ou, Y.C., Tsai, M.S., Chang, K.C. and Lee, G.C. (2010a), "Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy dissipation bars", Earthq. Eng. Struct. D., 39(11), 1181-1198. https://doi.org/10.1002/eqe.986
  14. Ou, Y.C., Wang, P.H., Tsai, M.S., Chang, K.C. and Lee, G.C. (2010b), "Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions", J. Struct. Eng.-ASCE, 136(3), 255-264. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000110
  15. Palermo, A., Pampanin, S. and Marriott, D. (2007), "Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections", J. Struct. Eng.-ASCE, 133(11), 1648-1661. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1648)
  16. Park, R., Kent, D.C. and Sampton, R.A. (1972), "Reinforced concrete members with cyclic loading", J. Struct. Div.-ASCE, 98(7), 1341-1360.
  17. Priestley, M.J.N., Verma, R. and Xiao, Y. (1994), "Seismic shear strength of reinforced concrete columns", J. Struct. Eng.-ASCE, 120(8), 2310-2329. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310)
  18. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, John Wiley & Sons, Inc., New York.
  19. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI J., 79(2), 13-27.
  20. Shim, C.S., Chung, C.H. and Kim, H.H. (2008), "Experimental evaluation of seismic performance of precast segmental bridge piers with a circular solid section", Eng. Struct., 30, 3782-3792. https://doi.org/10.1016/j.engstruct.2008.07.005
  21. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996), "Fibre beam-column model for non-linear analysis of R/C frames: Part I. Formulation", Earthq. Eng. Struct. D., 25, 711-725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9
  22. Wang, J.C., Ou, Y.C., Chang, K.C. and Lee, G.C. (2008a), "Large-scale seismic tests of tall concrete bridge columns with precast segmental construction", Earthq. Eng. Struct. D., 37, 1449-1465. https://doi.org/10.1002/eqe.824
  23. Wang, Z.Q., Ge, J.P. and Wei, H.Y. (2008b), "Seismic performance of precast concrete bridge column of East Sea Bridge", J. Tongji Univ. (Natural Science), 36(11), 1462-1466. (In Chinese)
  24. Zhu, Z.Y., Ahmad, I. and Mirmiran, A. (2006), "Fiber element modeling for seismic performance of bridge columns made of concrete-filled FRP tubes", Eng. Struct., 28, 2023-2035. https://doi.org/10.1016/j.engstruct.2006.03.031

피인용 문헌

  1. Rational analysis model and seismic behaviour of tall bridge piers vol.51, pp.1, 2014, https://doi.org/10.12989/sem.2014.51.1.131
  2. Influencing factors of residual drifts of precast segmental bridge columns with energy dissipation bars pp.2048-4011, 2019, https://doi.org/10.1177/1369433218780545
  3. Experimental testing and modeling of precast segmental bridge columns with hybrid normal- and high-strength steel rebars vol.166, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2018.01.159
  4. Cyclic Load Tests on Precast Segmental Bridge Columns with Both Steel and Basalt FRP Reinforcement vol.23, pp.3, 2012, https://doi.org/10.1061/(asce)cc.1943-5614.0000944
  5. Quasi-static test of the precast-concrete pile foundation for railway bridge construction vol.10, pp.1, 2020, https://doi.org/10.12989/acc.2020.10.1.049
  6. Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions vol.221, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2020.111037
  7. Seismic Performance of Precast Segmental Concrete-Filled Steel-Tube Bridge Columns with Internal and External Energy Dissipaters vol.26, pp.11, 2021, https://doi.org/10.1061/(asce)be.1943-5592.0001792
  8. Cyclic performance of different mitigation strategies proposed for segmental precast bridge piers vol.36, pp.None, 2012, https://doi.org/10.1016/j.istruc.2021.12.020