DOI QR코드

DOI QR Code

Perforation threshold energy of carbon fiber composite laminates

  • Hwang, Shun-Fa (Department of Mechanical Engineering, National Yunlin University of Science and Technology) ;
  • Li, Jia-Ching (Department of Mechanical Engineering, National Yunlin University of Science and Technology) ;
  • Mao, Ching-Ping (Automotive Research & Testing Center)
  • Received : 2011.03.19
  • Accepted : 2012.06.01
  • Published : 2012.07.25

Abstract

Two carbon fiber composite laminates, $[0/90]_{2S}$ and $[0/+45/90/-45]_S$, were considered in this work to find out the perforation threshold energy to complete the perforation process and the corresponding maximum contact force. Explicit finite element commercial software, LS-DYNA, was used to predict these values. According to the simulation results, these two types of composite laminates were tested by using a vertical drop-weight testing machine. After testing, the damage condition of these specimens were observed and compared with the results from finite element analysis. The testing results indicate that the perforation threshold energy is 6 Joules for $[0/90]_{2S}$ and 7 Joules for $[0/+45/90/-45]_S$, which is in good agreement with the simulation results. Also, the maximum contact force at the case of perforation threshold energy is the lowest as compared to the maximum contact forces occurring at the impact energy that is larger or less than the perforation threshold energy.

Keywords

References

  1. Aslan, Z., Karakuzu, R. and Okutan, B. (2003), "The response of laminated composite plates under low-velocity impact loading", Compos. Struct., 59, 119-127. https://doi.org/10.1016/S0263-8223(02)00185-X
  2. Atas, C. Akgun, Y., Dagdelen, O., Icten, B.M. and Sarikanat, M. (2011), "An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processes", Compos. Struct., 93, 1178-1186. https://doi.org/10.1016/j.compstruct.2010.10.002
  3. Dean, J., S-Fallah, A., Brown, P.M., Louca, L.A. and Clyne, T.W. (2011), "Energy absorption during projectile perforation of lightweight sandwich panels with metallic fibre cores", Compos. Struct., 93, 1089-1095. https://doi.org/10.1016/j.compstruct.2010.09.019
  4. Duan, Y., Keefe, M., Bogetti, T.A. and Powers, B. (2006), "Finite element modeling of transverse impact on a ballistic fabric", Int. J. Mech. Sci., 48, 33-43. https://doi.org/10.1016/j.ijmecsci.2005.09.007
  5. Goldsmith, W., Dharan, C.K.H. and Chang, H. (1995), "Quasi-static and ballistic perforation of carbon fibre laminates", Int. J. Solid Struct., 32, 89-103. https://doi.org/10.1016/0020-7683(94)00109-A
  6. Guida, M., Marulo, F., Meo, M., Grimaldi, A. and Olivares, G. (2011), "SPH - Lagrangian study of bird impact on leading edge wing", Compos. Struct., 93, 1060-1071. https://doi.org/10.1016/j.compstruct.2010.10.001
  7. Hashin, Z. (1980), "Failure criteria for unidirectional fiber composites", J. Appl. Mech., 47, 329-334. https://doi.org/10.1115/1.3153664
  8. He, T., Wen, H.M. and Qin, Y. (2007), "Penetration and perforation of FRP laminates struck transversely by conical-nosed projectiles", Compos. Struct., 81, 243-252. https://doi.org/10.1016/j.compstruct.2006.08.020
  9. He, T., Wen, H.M. and Qin, Y. (2008), "Finite element analysis to predict penetration and perforation of thick FRP laminates struck by projectiles", Int. J. Impact. Eng., 35, 27-36. https://doi.org/10.1016/j.ijimpeng.2006.11.008
  10. Jiang, D. and Shu, D. (2001), "Effects of damage threshold on stresses in composite laminates under transverse impact", Compos. Struct., 66, 61-67.
  11. Lee, B.L., Song, J.W. and Ward, J.E. (1994), "Fibre reinforced composites under ballistic impact loading", J. Compos. Mater., 28, 1202-1226. https://doi.org/10.1177/002199839402801302
  12. Liu, D. (1990), "Delamination resistance in stitched and unstitched composite plates subjected to impact loading", J. Reinf. Plast. Compos., 9, 59-69. https://doi.org/10.1177/073168449000900104
  13. Liu, D., Basavaraju, B.R. and Dang, X. (2000), "Impact perforation resistance of laminated and assembled composite plates", Int. J. Impact Eng., 24, 733-746. https://doi.org/10.1016/S0734-743X(00)00021-X
  14. Liu, D., Raju, B.B. and Dang, X. (1998), "Size effects on impact response of composite laminates", Int. J. Impact. Eng., 21, 837-854. https://doi.org/10.1016/S0734-743X(98)00036-0
  15. Meo, M., Morris, A.J., Vignjevic, R. and Marengo, G. (2003), "Numerical simulation of low-velocity impact on an aircraft sandwich panel", Compos. Struct., 62, 353-360. https://doi.org/10.1016/j.compstruct.2003.09.035
  16. Nguyen, M.Q., Jacombs, S.S., Thomson, R.S., Hachenberg, D. and Scott, M.L. (2005), "Simulation of impact on sandwich structures", Compos. Struct., 67, 217-227. https://doi.org/10.1016/j.compstruct.2004.09.018
  17. Smojver, I. and Ivancevic, D. (2011), "Bird strike damage analysis in aircraft structures using Abaqus/explicit and coupled Eulerian Lagrangian approach", Compos. Sci. Tech., 71, 489-498. https://doi.org/10.1016/j.compscitech.2010.12.024
  18. Sun, C.T. and Potti, S.V. (1995), "Modeling dynamic penetration of thick section composite laminates", Proceedings of the 36th AIAA/ASME/ASCE/AHS/ASC SDM Conference and AIAA/ASME Adaptive Structures Forum, New Orleans, Louisiana.
  19. Talebi, H., Wong, S.V. and Hamouda, A.M.S. (2009), "Finite element evaluation of projectile nose angle effects in ballistic perforation of high strength fabric", Compos. Struct., 87, 314-320. https://doi.org/10.1016/j.compstruct.2008.02.009
  20. Wang, Y., Low, K.H., Pang, H.L.J., Hoon, K.H., Che, F.X. and Yong, Y.S. (2006), "Modeling and simulation for a drop-impact analysis of multi-layered printed circuit boards", Microelectron Reliab., 46, 558-573. https://doi.org/10.1016/j.microrel.2005.05.007
  21. Zee, R.H. and Hsieh, C.Y. (1993), "Energy loss partitioning during ballistic impact of polymer composites", Polym. Compos., 14, 265-271. https://doi.org/10.1002/pc.750140312