DOI QR코드

DOI QR Code

A one-dimensional model for impact forces resulting from high mass, low velocity debris

  • Paczkowski, K. (Department of Civil and Environmental Engineering, University of Hawaii at Manoa) ;
  • Riggs, H.R. (Department of Civil and Environmental Engineering, University of Hawaii at Manoa) ;
  • Naito, C.J. (Department of Civil Engineering, Lehigh University, ATLSS Center) ;
  • Lehmann, A. (Department of Civil Engineering, Lehigh University, ATLSS Center)
  • 투고 : 2011.12.23
  • 심사 : 2012.05.01
  • 발행 : 2012.06.25

초록

Impact from water-borne debris during tsunami and flood events pose a potential threat to structures. Debris impact forces specified by current codes and standards are based on rigid body dynamics, leading to forces that are dependent on total debris mass. However, shipping containers and other debris are unlikely to be rigid compared to the walls, columns and other structures that they impact. The application of a simple one-dimensional model to obtain impact force magnitude and duration, based on acoustic wave propagation in a flexible projectile, is explored. The focus herein is on in-air impact. Based on small-scale experiments, the applicability of the model to predict actual impact forces is investigated. The tests show that the force and duration are reasonably well represented by the simple model, but they also show how actual impact differs from the ideal model. A more detailed three-dimensional finite element model is also developed to understand more clearly the physical phenomena involved in the experimental tests. The tests and the FE results reveal important characteristics of actual impact, knowledge of which can be used to guide larger scale experiments and detailed modeling. The one-dimensional model is extended to consider water-driven debris as well. When fluid is used to propel the 1-D model, an estimate of the 'added mass' effect is possible. In this extended model the debris impact force depends on the wave propagation in the two media, and the conditions under which the fluid increases the impact force are discussed.

키워드

참고문헌

  1. AASHTO (2009), "Vessel collision design of highway bridges", American Association of State Highway and Transportation Officials, 217.
  2. Arroyo-Caraballo, J.R. and Ebeling, R.M. (2006), "Glancing-blow impact forces by a barge train on a lock approach wall", J. Infrastruct. Syst., 5, 135-143.
  3. ASCE (2006), "Minimum design loads for buildings and other structures", ASCE/SEI 7-05, American Society of Civil Engineers.
  4. Consolazio, G.R. and Cowan, D.R. (2005), "Numerically efficient dynamic analysis of barge collisions with bridge piers", J. Struct. Eng., 8, 1256-1266.
  5. Consolazio, G.R., Cook, R.A., McVay, M.C., Cowan, D., Biggs, A. and Bui, L. (2006), "Barge impact testing of the St. George Island causeway bridge", UF 00026868/FDOT BC-354 RPWO 76, University of Florida, Gainesville, FL.
  6. Consolazio, G.R., Getter, D.J. and Davidson, M.T. (2009), "A static analysis method for barge-impact design of bridges with consideration of dynamic amplification", UF Project No. 00068901/FDOT BD-545-85, University of Florida, Gainsville, FL.
  7. Dassault Systemes, Abaqus Unified FEA Software, Ver. 6.10, Dassault Systemes Simulia Corp., Providence, RI, USA.
  8. FEMA (2005), Coastal Construction Manual, FEMA P-55, Edition 3, Vol. 2, Federal Emergency Management Agency, Washington, D.C.
  9. FEMA (2008), "Guidelines for design of structures for vertical evacuation from tsunamis", FEMA P646, Federal Emergency Management Agency.
  10. Goldsmith, W. (1960), Impact: The Theory and Physical Behaviour of Colliding Solids, Edward Arnold Ltd., London.
  11. Haehnel, R.B. and Daly, S.F. (2002), "Maximum impact force of woody debris on floodplain structures", ERDC/ CRREL TR-02-2, US Army Corp of Engineers, Engineer Research and Development Center.
  12. Haehnel, R.B. and Daly, S.F. (2004), "Maximum impact force of woody debris on floodplain structures", J. Hydraulic Eng., 2, 112-120.
  13. Johnson, W. (1972), Impact Strength of Materials, Edward Arnold, London, .
  14. Kumagai, K., Oda, K. and Fujii, N. (2006), "Applicability of simulation model for drift behavior of containers due to tsunami", Techno-Ocean 2006/19th JASNAOE Ocean Engineering Symposium, Kobe, Japan.
  15. Matsutomi, H. (2009), "Method for estimating collision force of driftwood accompanying tsunami inundation flow", J. Disaster Res., 6, 435-440.
  16. Mikhaylov, Y. (2009), "Evaluation of prototypical reinforced concrete building performance when subjected to tsunami loading", M.S. Thesis, University of Hawaii, USA.
  17. Mizutani, N., Takagi, Y., Shiraishi, K., Miyajima, S. and Tomita, T. (2005), "Study on wave force on a container on apron due to tsunamis and collision force of drifted container", Annual Journal of Coastal Engineering, 741-745.
  18. NRC (2004), Preventing Earthquake Disasters: The Grand Challenge in Earthquake Engineering: A Research Agenda for the Network for Earthquake Engineering Simulation (NEES), The National Academies Press, Washington, D.C..
  19. Oda, K., Okamoto, O. and Kumagai, K. (2006), "Development of estimation method on drift and collision behaviors of debris caused by tsunamis", Tech. Memorandum of Public Works Research Institute.
  20. Robertson, I.N., Riggs, H.R., Yim, S.C.S. and Young, Y.L. (2006), "Lessons from Katrina", Civil Engineering, ASCE Magazine, April, 56-63.
  21. USACE (2004), Barge Impact Analysis for Rigid Walls, ETL 1110-2-563, USACE, Washington, DC.
  22. Yeh, H. (2007), "Design tsunami forces for onshore structures", J. Disaster Res., 6, 1-6.
  23. Yeom, G.S., Nakamura, T. and Mizutani, N. (2009), "Collision analysis of container drifted by runup tsunami using drift collision coupled model", J. Disaster Res., 6, 441-449.

피인용 문헌

  1. Estimation of demands resulting from inelastic axial impact of steel debris vol.82, 2015, https://doi.org/10.1016/j.engstruct.2014.10.021
  2. Procedure for Site Assessment of the Potential for Tsunami Debris Impact vol.140, pp.2, 2014, https://doi.org/10.1061/(ASCE)WW.1943-5460.0000222
  3. A simplified model for estimating axial impact forces resulting from debris with non-uniform nonstructural mass vol.20, pp.6, 2017, https://doi.org/10.1177/1369433216668361
  4. Beam Response to Longitudinal Impact by a Pole vol.140, pp.7, 2014, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000765
  5. Experimental Investigations of Debris Dynamics over a Horizontal Plane vol.143, pp.3, 2017, https://doi.org/10.1061/(ASCE)WW.1943-5460.0000371
  6. Full-Scale Experimental Study of Impact Demands Resulting from High Mass, Low Velocity Debris vol.140, pp.5, 2014, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000948
  7. Study of demands resulting from transverse impact of high mass, low velocity debris vol.19, pp.8, 2016, https://doi.org/10.1177/1369433216642059
  8. Effect of nonstructural mass on debris impact demands: Experimental and simulation studies vol.88, 2015, https://doi.org/10.1016/j.engstruct.2015.01.048
  9. Experimental investigation of tsunami-borne debris impact force on structures: Factors affecting impulse-momentum formula vol.127, 2016, https://doi.org/10.1016/j.oceaneng.2016.09.008
  10. Measurements of tsunami-borne debris impact on structures using an embedded accelerometer vol.54, pp.4, 2016, https://doi.org/10.1080/00221686.2016.1170071
  11. vol.136, pp.4, 2014, https://doi.org/10.1115/1.4028338
  12. Engineering lessons from the 28 September 2018 Indonesian tsunami: debris loading vol.47, pp.1, 2020, https://doi.org/10.1139/cjce-2019-0049
  13. Conceptual Evaluation of Tsunami Debris Field Damming and Impact Forces vol.146, pp.6, 2012, https://doi.org/10.1061/(asce)ww.1943-5460.0000600
  14. Dynamic amplification responses of short span bridges considering scour and debris impacts vol.252, pp.None, 2022, https://doi.org/10.1016/j.engstruct.2021.113644