DOI QR코드

DOI QR Code

Effect of corrosion on the ultimate strength of double hull oil tankers - Part I: stiffened panels

  • Kim, Do Kyun (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Park, Dae Kyeom (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Kim, Jeong Hwan (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Kim, Sang Jin (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Kim, Bong Ju (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Seo, Jung Kwan (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University) ;
  • Paik, Jeom Kee (The Ship and Offshore Research Institute (The Lloyd's Register Educational Trust Research Centre of Excellence), Pusan National University)
  • 투고 : 2011.09.21
  • 심사 : 2012.04.11
  • 발행 : 2012.05.25

초록

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.

키워드

참고문헌

  1. ALPS/ULSAP (2011), "A computer program for ultimate limit state assessment of stiffened panels", (version 2011. 2), Advanced Technology Center, DRS C3 Systems, Inc., MD, USA (www.proteusengineering.com, www.maestromarine.com).
  2. ALPS/HULL (2011), "A computer program for progressive collapse analysis of ship hulls", (version 2011.2), Advanced Technology Center, DRS C3 Systems, Inc., MD, USA (www.proteusengineering.com, www.maestromarine.com).
  3. DNV/PULS (2010), "A computer program for panel ultimate limit state", User's Manual, DNV RP-C201, Det Norske Veritas, Oslo.
  4. DNV (2003), Fatigue Assessment of Ship Structures, Classification Notes, No. 30.7.
  5. Fricke, W. and Kahl, A. (2005), "Comparison of different structural stress approaches for fatigue assessment of welded ship structures", Marine Struct., 18, 473-488. https://doi.org/10.1016/j.marstruc.2006.02.001
  6. Fujikubo, M., Harada, M., Yao, T., Mohammad, R.K. and Yanagihara, D. (2005), "Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: Continuous stiffened panel", Marine Struct., 18, 411-427. https://doi.org/10.1016/j.marstruc.2006.01.001
  7. Gudze, M.T. and Melchers, R.E. (2008), "Operational based corrosion analysis in naval ships", Corros. Sci., 50(12), 3296-3307. https://doi.org/10.1016/j.corsci.2008.08.048
  8. Guo, J., Wang, G., Ivanov, L. and Perakis, A.N. (2008), "Time-varying ultimate strength of aging tanker deck plate considering corrosion effect", Marine Struct., 21(4), 402-419. https://doi.org/10.1016/j.marstruc.2008.03.002
  9. Hughes, O.F. and Paik, J.K. (2010), Ship Structural Analysis and Design, Society of Naval Architects and Marine Engineers, New Jersey, USA.
  10. IACS (2006a), "Common structural rules for double hull oil tankers", International Association of Classification Societies, London, UK.
  11. IACS (2006b), "Common structural rules for bulk carriers", International Association of Classification Societies, London, UK.
  12. ISO (2007), "International standard ISO 18072-1, Ships and marine technology - Ship structures, Part 1: General requirements for their limit state assessment", International Organization for Standardization, Geneva.
  13. Kang, S.W., Kim, M.H., Kim, J.H., Kim, K.S., Kang, J.K. and Heo, J.H. (2010), "An experimental study on the fatigue strength assessment of longi-web connections in ship structures using structural stress", Ocean Eng., 36, 1067-1072.
  14. Lotsberg, I. (2006), "Assessment of fatigue capacity in the new bulk carrier and tanker rules", Marine Struct., 19, 83-96. https://doi.org/10.1016/j.marstruc.2006.03.001
  15. Khedmati, M.R., Nouri, Z.H.M.E. and Roshanali, M.M. (2011), "An effective proposal for strength evaluation of steel plates randomly corroded on both sides under uniaxial compression", Steel Compos. Struct., 11(3), 183-205. https://doi.org/10.12989/scs.2011.11.3.183
  16. Paik, J.K., Kim, B.J. and Seo, J.K. (2008), "Methods for ultimate limit state assessment of ships and shipshipped offshore structures: Part I (unstiffened panels), Part II (stiffened panels) and Part III (hull girders)", Ocean Eng., 35(2), 261-286. https://doi.org/10.1016/j.oceaneng.2007.08.004
  17. Paik, J.K., Kim, D.K. and Kim, M.S. (2009), "Ultimate strength performance of Suezmax tanker structures: Pre- CSR versus CSR designs", Int. J. Marit. Eng., 151(A2).
  18. Paik, J.K., Lee, J.M., Hwang, J.S. and Park, Y.I. (2003a), "A time-dependent corrosion wastage model for the structures of single/double hull tankers and FSOs/FPSOs", Marine Technol., 40(3), 201-217.
  19. Paik, J.K., Thayamballi, A.K., Park, Y.I. and Hwang, J.S. (2003b), "A time-dependent corrosion wastage model for bulk carrier structures", Int. J. Marit. Eng., 145(A2), 61-87.
  20. Paik, J.K., Thayamballi, A.K., Park, Y.I. and Hwang, J.S. (2004), "A time-dependent corrosion wastage model for seawater ballast tanks of ships", Corros. Sci., 46, 471-486. https://doi.org/10.1016/S0010-938X(03)00145-8
  21. Paik, J.K. and Thayamballi, A.K. (2007), Ship-shaped Offshore Installations: Design, Building, and Operation, Cambridge University Press, Cambridge, UK.
  22. Paik, J.K. and Melchers, R.E. (2008), Condition Assessment of Aged Structures, CRC Press, New York, USA.
  23. Paik, J.K., Kim, S.J., Kim, D.H., Kim, D.C., Frieze, P.A., Abbattista, M., Vallascas, M. and Hughes, O.F. (2011), "Benchmark study on use of ALPS/ULSAP method to determine plate and stiffened panel ultimate strength", Proceedings of MARSTRUCT 2011 Conference, Hamburg, Germany.
  24. Poutiainen, I. and Marquis, G. (2006), "A fatigue assessment method based on weld stress", Int. J. Fatigue, 28, 1037-1046. https://doi.org/10.1016/j.ijfatigue.2005.11.007

피인용 문헌

  1. Ultimate strength performance of bulk carriers with various corrosion additions vol.10, pp.1, 2015, https://doi.org/10.1080/17445302.2014.883957
  2. Ultimate Strength Assessment of Ship Stiffened Panel under Arctic Conditions vol.51, pp.4, 2014, https://doi.org/10.3744/SNAK.2014.51.4.283
  3. Time-Dependent Ultimate Strength Performance of Corroded FPSOs vol.39, pp.11, 2014, https://doi.org/10.1007/s13369-014-1364-4
  4. Ultimate strength performance of tankers associated with industry corrosion addition practices vol.6, pp.3, 2014, https://doi.org/10.2478/IJNAOE-2013-0196
  5. Ultimate strength performance of Northern sea going non-ice class commercial ships vol.52, pp.3, 2014, https://doi.org/10.12989/sem.2014.52.3.613
  6. An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression vol.140, 2017, https://doi.org/10.1016/j.oceaneng.2017.05.031
  7. Operability of non-ice class aged ships in the Arctic Ocean—Part I: Ultimate limit state approach vol.102, 2015, https://doi.org/10.1016/j.oceaneng.2014.12.040
  8. Simplified Technique for Predicting Offshore Pipeline Expansion vol.17, pp.1, 2018, https://doi.org/10.1007/s11804-018-0006-8
  9. The necessity of applying the common corrosion addition rule to container ships in terms of ultimate longitudinal strength vol.49, pp.None, 2012, https://doi.org/10.1016/j.oceaneng.2012.04.012
  10. Ultimate strength of initially deflected plate under longitudinal compression: Part I = An advanced empirical formulation vol.68, pp.2, 2012, https://doi.org/10.12989/sem.2018.68.2.247
  11. A technical review on ultimate strength prediction of stiffened panels in axial compression vol.170, pp.None, 2012, https://doi.org/10.1016/j.oceaneng.2018.10.022
  12. Ultimate bending capacity of aged fixed platform by considering the effect of marine fouling vol.16, pp.5, 2019, https://doi.org/10.1590/1679-78255479
  13. An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part I = generalisation vol.12, pp.None, 2012, https://doi.org/10.1016/j.ijnaoe.2020.06.007
  14. An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part II = Application to the ship's ballast tank vol.12, pp.None, 2012, https://doi.org/10.1016/j.ijnaoe.2020.07.002
  15. Ultimate Compressive Strength of Stiffened Panel: An Empirical Formulation for Flat-Bar Type vol.8, pp.8, 2012, https://doi.org/10.3390/jmse8080605
  16. Prediction of Longitudinal Curvature Radius of 3D Surface Based on Quadratic Relationship between Strain and Coordinates in Continuous Roll Forming vol.10, pp.9, 2012, https://doi.org/10.3390/met10091249
  17. The effect of corrosion spatial randomness and model selection on the ultimate strength of stiffened panels vol.16, pp.suppl1, 2021, https://doi.org/10.1080/17445302.2021.1907063