DOI QR코드

DOI QR Code

Reduction of seismic pounding effects of base-isolated RC highway bridges using MR damper

  • Sheikh, M.N. (School of Civil, Mining and Environmental Engineering, University of Wollongong) ;
  • Xiong, J. (School of Civil, Mining and Environmental Engineering, University of Wollongong) ;
  • Li, W.H. (School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong)
  • 투고 : 2011.10.20
  • 심사 : 2012.02.21
  • 발행 : 2012.03.25

초록

Significant structural damages due to pounding between adjacent superstructures of multi-span reinforced concrete (RC) highway bridges have been observed in past earthquakes. Different methods have been proposed in the literature to mitigate the adverse seismic pounding effects. This paper presents an analytical investigation on the use of magnetorheological (MR) dampers in reducing seismic pounding effects of base-isolated multi-span RC highway bridges. It has been observed that MR damper can effectively reduce the seismic pounding effect. Three control strategies (passive off, passive on, and bang bang control) of MR damper have been investigated. Although all the control strategies are found to be effective, bang bang control has been observed to be the most effective.

키워드

참고문헌

  1. Anagnostopoulos, S.A. (1988), Pounding of building in series during earthquake", Earthq. Eng. Struct. D., 16(3), 443-456. https://doi.org/10.1002/eqe.4290160311
  2. Jung, H.J., Jang, D.D., Choi, K.M. and Cho, S.W. (2009), "Vibration mitigation of highway isolated bridge using MR damper-based smart passive control system employing an electromagnetic induction part", Struct. Contol Hlth. Monit., 16(6), 613-625. https://doi.org/10.1002/stc.333
  3. Guo, A.X. and Li, H. (2008), "Pounding reduction of highway bridges with pounding effect by using Magnetorheological dampers under earthquake excitation", Adv. Struct. Eng., 11(3), 317-334.
  4. Guo, A.X., Li, Z., Li, H. and Ou, J. (2009), "Experimental and analytical study on pounding reduction of baseisolated highway bridges using MR dampers", Earthq. Eng. Struct. D., 38(11), 1307-1333. https://doi.org/10.1002/eqe.903
  5. Jankowski, R., Wilde, K. and Fujino, Y. (1998), "Pounding of superstructure segments in isolated elevated bridge during earthquakes", Earthq. En. Struct. D., 27, 487-502. https://doi.org/10.1002/(SICI)1096-9845(199805)27:5<487::AID-EQE738>3.0.CO;2-M
  6. Jankowski, R., Wilde, K. and Fujino, Y. (2000), "Reduction of pounding effects in elevated bridges during earthquake", Earthq. Eng. Struct. D., 29(2), 195-212. https://doi.org/10.1002/(SICI)1096-9845(200002)29:2<195::AID-EQE897>3.0.CO;2-3
  7. Li, W.H., Du, H., Chen, G., Yeo, S.H. and Guo, N.Q. (2002), "Nonlinear rheological behavior of magnetorheological fluids: step-strain experiments", Smart Mater. Struct., 11(2), 209-217. https://doi.org/10.1088/0964-1726/11/2/304
  8. Li, W.H., Yao, G.Z., Chen, G., Yeo, S.H. and Yap, F.F. (2000), "Testing and steady state modeling of a linear MR damper under sinusoidal loading", Smart Mater. Struct., 9(1), 95-102. https://doi.org/10.1088/0964-1726/9/1/310
  9. Maison B.F. and Kasai, K. (1990), "Analysis for type of structural pounding", J. Struct. Eng., 116, 957-977. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(957)
  10. Sireteanu, T. and Stammers, C.W. (2000), "Control of building seismic response by means of three semi-active friction dampers", J. Sound Vib., 237(5), 745-759. https://doi.org/10.1006/jsvi.1999.3096
  11. Spencer B.F., Dyke, S.J., Sain, M.K. and Carlson, J.D. (1997), "Phenomenological model of a magnetorheological damper", J. Eng. Mech., 123(3), 230-238. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230)
  12. Vega, J., Rey, I.D. and Alarcon, E. (2009), "Pounding force assessment in performance-based design of bridges", Earthq. Eng. Struct. D., 38, 1525-1544. https://doi.org/10.1002/eqe.916
  13. Wang, X. and Gordaninejad, F. (2007), Magnetorheological Materials and Their Applications, Intelligent Materials, Eds. Shahinpoor, M. and Schneider, H.J., 339-385.
  14. Yang, M.G., Chen, Z.Q. and Hua, X.G. (2011), "An experimental study on using MR damper to mitigate longitudinal seismic response of a suspension bridge", Soil Dyn. Earthq. Eng., 31, 1171-1181. https://doi.org/10.1016/j.soildyn.2011.04.006
  15. Yao, G.Z., Yap, F.F., Chen, G., Li, W.H. and Yeo, S.H. (2002), "MR damper and its application for semi-active control of vehicle suspension system", Mechatronics, 12(7), 963-973. https://doi.org/10.1016/S0957-4158(01)00032-0
  16. Zhu, P., Abe, M. and Fujino, Y. (2004), "Evaluation of pounding countermeasures and serviceability of elevated bridges during seismic excitation using 3D modeling", Earthq. Eng. Struct. D., 33(5), 591-609. https://doi.org/10.1002/eqe.365

피인용 문헌

  1. Seismic performance evaluation and retrofitting with viscous fluid dampers of an existing bridge in Istanbul vol.49, pp.4, 2014, https://doi.org/10.12989/sem.2014.49.4.463
  2. A study on a MR damping system with lumped mass for a two-span bridge to diminish its earthquake-induced longitudinal vibration vol.92, 2017, https://doi.org/10.1016/j.soildyn.2016.10.004
  3. Principle, modeling, and testing of an annular-radial-duct magnetorheological damper vol.201, 2013, https://doi.org/10.1016/j.sna.2013.07.028
  4. Optimum tuned mass damper approaches for adjacent structures vol.7, pp.6, 2014, https://doi.org/10.12989/eas.2014.7.6.1071
  5. Pounding force response spectrum for near-field and far-field earthquakes vol.19, pp.5, 2012, https://doi.org/10.1016/j.scient.2012.07.012
  6. A Novel Design of Magnetorheological Damper with Annular Radial Channel vol.2016, 2016, https://doi.org/10.1155/2016/8086504
  7. Longitudinal vibration control for a suspension bridge subjected to vehicle braking forces and earthquake excitations based on magnetorheological dampers vol.22, pp.17, 2016, https://doi.org/10.1177/1077546314564781
  8. Research on Hybrid Seismic Response Control System for Motion Control of Two Span Bridge vol.744, 2016, https://doi.org/10.1088/1742-6596/744/1/012043
  9. Telescopic columns as a new base isolation system for vibration control of high-rise buildings vol.3, pp.6, 2012, https://doi.org/10.12989/eas.2012.3.6.853
  10. Devices for protecting bridge superstructure from pounding and unseating damages: an overview vol.13, pp.3, 2017, https://doi.org/10.1080/15732479.2016.1170155
  11. Expected extreme value of pounding force between two adjacent buildings vol.61, pp.2, 2017, https://doi.org/10.12989/sem.2017.61.2.183
  12. A hybrid seismic response control to improve performance of a two-span bridge vol.61, pp.5, 2012, https://doi.org/10.12989/sem.2017.61.5.675
  13. Optimum stiffness values for impact element models to determine pounding forces between adjacent buildings vol.77, pp.2, 2012, https://doi.org/10.12989/sem.2021.77.2.293
  14. Development of a hybrid control algorithm for effective reduction of drift in multispan isolated bridges vol.143, pp.None, 2021, https://doi.org/10.1016/j.soildyn.2021.106659