DOI QR코드

DOI QR Code

Experimental study on laterally restrained steel columns with variable I cross sections

  • 투고 : 2011.07.07
  • 심사 : 2012.05.17
  • 발행 : 2012.09.25

초록

Steel structural elements with web-tapered I cross section, are usually made of welded thin plates. Due to the nonrectangular shape of the element, thin web section may be obtained at the maximum cross section height. The buckling strength is directly influenced by lateral restraining, end support and initial imperfections. If no lateral restraints, or when they are not effective enough, the global behaviour of the members is characterized by the lateral torsional mode and interaction with sectional buckling modes may occur. Actual design codes do not provide a practical design approach for this kind of elements. The paper summarizes an experimental study performed by the authors on a relevant number of elements of this type. The purpose of the work was to evaluate the actual behaviour of the web tapered beam-columns when applying different types of lateral restraints and different web thickness.

키워드

참고문헌

  1. Abaqus, v.6.5.1, Dassault Systems/Simulia, Providence, RI, USA; 2008.
  2. AS 4100-1998. Australian Standard: Steel Structures. Australian Building Codes Board.
  3. Cristutiu, I. M. and Muntean, N. (2010), "Erection and manufacturing imperfection influence on steel frame behaviour", Proceedings of International workshop "Global and regional environmental protection (GLOREP 2010), Timisoara, November.
  4. Consteel v.6.0 user manual (2011), Developed by Consteel Ltd. Budapest.
  5. Davies, J. M. (1990), "In-plane stability in portal frames", The Structural Engineer, 68(8), 141-147.
  6. Dubina, D. and Cristutiu, I. M. (2005), "Buckling strength of pitched roof portal frames of Class 3 and 4 tapered members" Proceedings of EUROSTEEL 2005-4th European Conference on Steel and Composite Structures, Maastricht, June.
  7. Duthinh, D. and Fritz, W. P. (2007), "Safety Evaluation of Low-Rise Steel Structures under Wind Loads by Nonlinear Database-Assisted Technique". J. Struct. Eng. ASCE, 0733-9445(2007)133: 4(587), 587-594.
  8. EN 1991-1-1 Eurocode 1. (2002), "Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings", CEN-CEN-Brussels, Belgium, 2002.
  9. EN 1991-1-1 Eurocode 1. (2003), "Eurocode 1 - Actions on structures - Part 1-3: General actions -Snow loads", CEN-CEN-Brussels, Belgium, 2003.
  10. EN 1993-1-1 Eurocode 3. (2005), "Design of steel structures Part 1.1: General rules and rules for buildings", CEN-CEN-Brussels, Belgium, 2005.
  11. EN 1993-1-5 Eurocode 3. (2003), "Design of steel structures Part 1.5: Plated structural elements", CEN-CENBrussels, Belgium, 2003.
  12. Farshi, B. and Kooshesh, F. (2009), "Buckling Analysis of structural steel frames with inelastic effects according to codes" J. Constr. Steel Res., 65(2009), 2078-2085. https://doi.org/10.1016/j.jcsr.2009.04.018
  13. Goncalves, R. and Camotim, D. (2005), "On the incorporation of the equivalent member imperfections in the inplane design of steel frames", J. Constr. Steel Res., 61(2005), 1226-1240. https://doi.org/10.1016/j.jcsr.2005.01.006
  14. Jimenez, G. A. and Galambos, T. V. (2008), "In plane and out of plane behaviour of web tapered beam-columns" Proceedings of EM08- Inaugural International Conference of the Engineering Mechanics Institute, Minnesota, May.
  15. Kala, Z. (2011), "Sensitivity Analysis of Steel Plane Frames with Initial Imperfections", Eng. Struct., 33(8), 2342-2349. https://doi.org/10.1016/j.engstruct.2011.04.007
  16. Kala, Z. (2011), "Sensitivity Analysis of Stability Problems of Steel Plane Frames", Thin-Walled Structures, 49(5), 645-651.
  17. Nagy, Zs. et al. (2010) "Case study: The supporting steel structure of the ice rink - city of Tg. Mures, Romania", Proceedings of the 1-st International Conference on Structures & Architecture - ICSA2010, Guimaraes, July.
  18. Nagy, Zs. and Cristuþiu, I. M. (2010). "Advanced nonlinear investiga-tions of a 50 m span frame case study: The steel structure of the ice rink, city of Targu Mures, Romania". Proceedings of Stability and Ductility of Steel Structures, SDSS-2010, Rio de Janeiro, September.
  19. Raftoyiannis, I. G. and Ermopoulos, J. C. (2005), "Stability of tapered and stepped steel columns with initial imperfections" Eng. Struct., 27(2005), 1248-1257. https://doi.org/10.1016/j.engstruct.2005.03.009
  20. Salem, A. H. et al. (2009). "Ultimate capacity of axially loaded thin-walled tapered column with doubly symmetric sections". Thin Walled Structures, 47(2009), 931-941. https://doi.org/10.1016/j.tws.2009.02.011
  21. Simoes da Silva, L., Rebelo, C. and Marques, L. (2009), "Application of the general method for the evaluation of the stability resistance of non-uniform members," Proceedings of the Sixth International Conference on Advances in Steel Structures - ICASS 09, Hong Kong, China, December.
  22. Shanmugam, N. E. and Min, H. (2007), "Ultimate load behaviour of tapered steel plate girders", Steel. Compos. Struct., 7(6), 469-486. https://doi.org/10.12989/scs.2007.7.6.469
  23. Szalai, J. and Papp, F. (2009), "On the probabilistic evaluation of the stability resistance of steel columns and beams", J. Constr. Steel Res., 65(2009), 569-577. https://doi.org/10.1016/j.jcsr.2008.08.006
  24. Taras, A. and Greiner, R. (2008), "Torsional and flexural torsional buckling - A study on laterally restrained Isections", J. Constr. Steel Res., 64(2008)7-8, S. 725-731. https://doi.org/10.1016/j.jcsr.2008.01.019
  25. Taras, A. and Greiner, R. (2008), "Development of consistent buckling curves for torsional and lateral-torsional buckling", Steel Constr., 1(2008)1, S. 42-50. https://doi.org/10.1002/stco.200890005

피인용 문헌

  1. Research on anti-seismic property of new end plate bolt connections - Wave web girder-column joint vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.045
  2. Local and Global Stability of I Steel Members with Tapered Web via Advanced Nonlinear Analysis vol.710, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.710.372
  3. Behavior of Steel Welded Tapered Beam-column vol.11, pp.1, 2012, https://doi.org/10.2174/1874149501711010345
  4. Modeling for fixed-end moments of I-sections with straight haunches under concentrated load vol.23, pp.5, 2012, https://doi.org/10.12989/scs.2017.23.5.597
  5. Tapered beam-column analysis by analytical solution vol.172, pp.11, 2012, https://doi.org/10.1680/jstbu.18.00062
  6. Overall stability of steel web-tapered frame members vol.775, pp.None, 2020, https://doi.org/10.1088/1757-899x/775/1/012152
  7. Design of web-tapered steel I-section members by second-order inelastic analysis with strain limits vol.224, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2020.111242