References
- I. S. Moon, D. S. Kim, E. J. Lee and S. H. Lee, "New Method for Patterning front and Rear Contacts of High-Rfficiency Solar Cells with Mechanical Scriber", 17th European Photovoltaic Solar Energy Conference and Exhibition (PVSEC) Munich, 22, (2001).
- M. A. Green, "Silicon Solar Cells : Advanced Principles Practice", pp.117, Centre for Photovoltaic Devices and Systems, University of New South Wales, Sydney (1995).
- E. J. Lee, D. S. Kim and S. H. Lee, "Ni/Cu Metallization for Low-Cost High-Efciency PERC Cells", Sol. Energ. Mat. Sol. C, 74, 65 (2002). https://doi.org/10.1016/S0927-0248(02)00049-1
- F. d'Heurle, C. S. Petersson, J. E. E. baglin, S. J. La Placa and C. Y. Wong, "Formation of Thin Films of NiSi - Metastable Structure, Diffusion Mechanisms in Intermetallic Compounds", J. Appl. Phys., 55, 4208 (1984). https://doi.org/10.1063/1.333021
-
E. G. Colgan, M. Maenpaa, M. Finetti and MA. Nicolet, "Electrical Characteristics of Thin
$Ni_{2}Si$ , NiSi, and$NiSi_{2}$ Layers grown on Silicon", J. Electron. Mater., 12, 413 (1983). https://doi.org/10.1007/BF02651140 - Y. Hu and S. P. Tay, "Spectroscopic Ellipsometry Investigation of Nickel Silicide Formation by Rapid Thermal Process", J. Vac. Sci. Technol. A 16, 1820 (1998). https://doi.org/10.1116/1.581114
- J. D. Lee, H. K. Kwon and S. H. Lee, "Study of Ni/Cu front Metal Contact Applying Selective Emitter Silicon Solar Cells", Kor. J. Met. Mater., 49, 905 (2011).
- S. R. Kim and H. Y. Lee, "Measurement of Adhesion", Journal of Adhesion and Interface., 4, 21 (2003).
- R. H. Dauskardt, M. Lane, Q. Ma and N. Krishna, "Adhesion and Debonding of Multi-Layer Thin Film Structures", Eng Fract. Mech., 61, 141 (1998). https://doi.org/10.1016/S0013-7944(98)00052-6
- J. W. Kim, K. S. Kim, H. J. Lee, H. Y. Kim, Y. B. Park and S. M. Hyun, "Characterization and Observation of Cu-Cu Thermo-Compression Bonding Using 4-point Bending Test System", J. Microelectron. Packag. Soc., 18(4), 11 (2011).
- E. J. Jang, J. W. Kim, B. Kim, T. Matthias and Y. B. Park, "Annealing Temperature Effect on the Cu-Cu Bonding Energy for 3D-IC Integration", Met. Mater. Int. 17, 105 (2011). https://doi.org/10.1007/s12540-011-0214-0
- J. W. Kim, K. S. Kim, H. J. Lee, H. Y Kim, Y. B. Park and S. M. Hyun, "The Effect of Plasma Pre-Cleaning on the Cu- Cu Direct Bonding for 3D Chip Stacking", proc. 18th IEEE International Symposium on the Physical & Failure Analysis of Integrated Circuits (IPFA), Incheon, 102, IEEE Reliability/ CPMT/ED (2011).
- R. Shaviv, S. Roham and P. Woytowitz, "Optimizing the Precision of the Four-Point Bend Test for the Measurement of Thin Film Adhesion", Microelectronic Engineering 82, 99 (2005). https://doi.org/10.1016/j.mee.2005.06.006
- K. N. Chen, A. Fan, C. S. Tan and R. Reif, "Morphology and Bond Strength of Copper Wafer Bonding", Electrochemical and Solid-State Letters, 7(1), G14 (2004). https://doi.org/10.1149/1.1626994
- K. J. Min, M. H. Jeong, K. H. Lee, Y. S. Jeong and Y. B. Park, "Effect of Temperature/Humidity Treatment Conditions on Interfacial Adhesion of Electroless-Plated Ni on Polyimide", Kor. J. Met. Mater., 47, 675 (2009).
- C. D. Wagner, W. M. Riggs, L. E. Davis and J. F. Moulder, "Handbook of X-ray Photoelectron Spectroscopy", pp.56-84, Perkin-Elmer, U.S.A (1978).
Cited by
- Effects of Wet Chemical Treatment and Thermal Cycle Conditions on the Interfacial Adhesion Energy of Cu/SiNxthin Film Interfaces vol.21, pp.1, 2014, https://doi.org/10.6117/kmeps.2014.21.1.045
- A Four-point Bending Probe Station for Semiconductor Sensor Piezoresistance Measurement vol.20, pp.4, 2013, https://doi.org/10.6117/kmeps.2013.20.4.035