마이크로전자및패키징학회지 (Journal of the Microelectronics and Packaging Society)

  • 제19권1호
  • /
  • Pages.33-38
  • /
  • 2012
  • /
  • 1226-9360(pISSN)
  • /
  • 2287-7525(eISSN)
한국마이크로전자및패키징학회 (The Korean Microelectronics and Packaging Society)
권호 표지
DOI QR코드

DOI QR Code

n형 Bi-Te와 p형 Sb-Te 증착박막으로 구성된 in-plane 열전센서의 형성공정 및 감지특성

Fabrication Process and Sensing Characteristics of the In-plane Thermoelectric Sensor Consisting of the Evaporated p-type Sb-Te and n-type Bi-Te Thin Films

  • 배재만 (홍익대학교 공과대학 신소재공학과) ;
  • 김민영 (홍익대학교 공과대학 신소재공학과) ;
  • 오태성 (홍익대학교 공과대학 신소재공학과)
  • Bae, Jae-Man (Department of Materials Science and Engineering, Hongik University) ;
  • Kim, Min-Young (Department of Materials Science and Engineering, Hongik University) ;
  • Oh, Tae-Sung (Department of Materials Science and Engineering, Hongik University)
  • 투고 : 2012.02.06
  • 심사 : 2012.02.24
  • 발행 : 2012.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

유리기판에 n형 Bi-Te 열전박막과 p형 Sb-Te 열전박막을 진공증착하여 in-plane 열전센서를 형성한 후, 열전센서의 감지특성을 분석하였다. 열전센서를 구성하는데 사용한 n형 Bi-Te 증착박막은 -165 ${\mu}V$/K의 Seebeck 계수와 $80{\times}10^{-4}W/K^2-m$의 출력인자를 나타내었으며, p형 Sb-Te 증착박막은 142 ${\mu}V$/K의 Seebeck 계수와 $51.7{\times}10^{-4}W/K^2-m$의 출력인자를 나타내었다. 이와 같은 n형 Bi-Te 및 p형 Sb-Te 박막 15쌍으로 구성된 열전센서는 2.8 mV/K의 감지도를 나타내었다.

An in-plane thermoelectric sensor was processed on a glass substrate by evaporation of the n-type Bi-Te and p-type Sb-Te thin films, and its sensing characteristics were evaluated. The n-type Bi-Te thins film used to fabricate the inplane sensor exhibited a Seebeck coefficient of -165 ${\mu}V$/K and a power factor of $80{\times}10^{-4}W/K^2-m$. The p-type Sb-Te thin film used to fabricate the in-plane sensor exhibited a Seebeck coefficient of 142 ${\mu}V$/K and a power factor of $51.7{\times}10^{-4}W/K^2-m$. The in-plane thermoelectric sensor consisting of 15 pairs of the n-type Bi-Te and the p-type Sb-Te evaporated thin films exhibited a sensitivity of 2.8 mV/K.

키워드

참고문헌

  1. K. Rajasekar, L. Kungumadevi, A. Subbarayan, and R. Sathyamoorthy, "Thermal sensors based on $Sb_{2}Te_{3}$ and $(Sb_{2}Te_{3})_{70}(Bi_{2}Te_{3})_{30} $ thin films", Ionics, 14, 69 (2007).
  2. K. Tittes, A. Bund, W. Plieth, A. Bentien, S. Paschen, M. Plotner, H. Grafe, and W-H. Fischer, "Electrochemical deposition of Bi2Te3 for thermoelectric microdevices", J. Solid State Electrochem., 7, 714 (2003). https://doi.org/10.1007/s10008-003-0378-8
  3. L. M. Goncalves, C. Couto, P. Alpuim, D. M. Rowe, and J. H. Correia, "Thermoelectric microstructures of $Bi_2Te_3/Sb_2Te_3$ for a self-calibrated micro-pyrometer", Sens. Actuators, A130-131, 346 (2006).
  4. Y. N. Choi, M. Y. Kim, and T. S. Oh, "Thermoelectric properties of Bi-Te thin films processed by coevaporation", J. Microelectron. Packag. Soc., 17(4), 89 (2010).
  5. J. M. Bae, M. Y. Kim, and T. S. Oh, "Effects of evaporation processes and a reduction annealing on thermoelectric properties of the Sb-Te thin films", J. Microelectron. Packag. Soc., 17(4), 77 (2010).
  6. D. D. L. Wijingaards, S H. Kong, M. Bartek, and R. F. Wolffenbuttel, "Design and fabrication of on-chip integrated poly SiGe and poly Si Peltier devices", Sens. Actuators, 85, 316 (2000). https://doi.org/10.1016/S0924-4247(00)00417-9
  7. A. W. Van Herwaarden, "The Seebeck effect in silicon ICs", Sens. Actuators, 6, 245 (1984). https://doi.org/10.1016/0250-6874(84)85020-9
  8. J. R. Lim, G. J. Snyder, C.-K. Huang, J. A. Herman, M. A. Ryan, and J.-P. Fleurial, Proc, "Thermoelectric microdevice fabrication process and evaluation at the Jet Propulsion Laboratory (JPL)", Proc. 21th International Conference on Thermoelectrics, Long Beach, 535, International Thermoelectric Society (2002).
  9. A. Giani, A. Boulouz, F. Pascal-Delannoy, A. Foucaran, A. Boyer, B. Aboulfarah, and A. Mzerd, J. Mater, "Electrical and thermoelectrical properties of $Sb_2Te_3$ prepared by the metalorganic chemical vapor deposition technique", J. Mater. Sci. Lett., 18, 541 (1999). https://doi.org/10.1023/A:1006670327086
  10. M. Y. Kim and T. S. Oh, "Effects of annealing in a reduction ambient on thermoelectric properties of the thin films processed by vacuum evaporation", J. Microelectron. Packag. Soc., 15(3), 1 (2008).
  11. Y. Kim, A. DiVenere, C. K. L. Wong, J. B. Ketterson, S. Cho, and J. R. Meyer, "Structural and thermoelectric transport properties of $Sb_2Te_3$ thin films grown by molecular beam epitaxy", J. Appl. Phys., 91, 715 (2002). https://doi.org/10.1063/1.1424056
  12. L. W. Da Silva, M. Kaviany, and C. Uher, "Thermoelectric performance of films in the bismuth-tellurium and antimonytellurium systems", J. Appl. Physics, 97, 114903 (2005). https://doi.org/10.1063/1.1914948
  13. D. D. Frari, S. Diliberto, N. Stein, C. Boulanger, and J.-M. Lecuire, "Comparative study of the electrochemical preparation of $Bi_2Te_3$, $Sb_2Te_3$, and $(Bi_{x}Sb_{1-x})_2Te_3 $ films", Thin Solid Films, 483, 44 (2005). https://doi.org/10.1016/j.tsf.2004.12.015
  14. M. Takahashi, M. Kojima, S. Sato, N. Ohnisi, A. Nishiwaki, K. Wakita, T. Miyuki, S. Ikeda, and Y. Muramatsu, "Electric and thermoelectric properties of electrodeposited bismuth telluride ($Bi_2Te_3$) films", J. Appl. Phys., 96, 5582 (2004). https://doi.org/10.1063/1.1785834
  15. A. H. Weber and G. Plantenberg, "Rapid and direct measurement of vapor pressure of liquid metals", Phys. Rev. 69, 649 (1946). https://doi.org/10.1103/PhysRev.69.649
  16. D. H. Kim and G. H. Lee, "Improvement of thermoelectric properties of bismuth telluride thin films using rapid thermal processing", Korean J. Mater. Res., 16(5), 292 (2006). https://doi.org/10.3740/MRSK.2006.16.5.292
  17. M. Y. Kim and T. S. Oh, "Electrodeposition and thermoelectric characteristics of $Bi_{2}Te_{3}$ and $Sb_{2}Te_{3}$ films for thermopile sensor applications", J. Electron. Mater., 38, 1176 (2009). https://doi.org/10.1007/s11664-008-0653-7
  18. P. Fan, Z.-H. Zheng, G.-X. Liang, X.-M. Cai, D.-P. Zhang, "Composition-dependent characterization of $Sb_{2}Te_{3}$ thin films prepared by ion beam sputtering deposition", Chin. Phys. Lett., 27, 087201 (2010). https://doi.org/10.1088/0256-307X/27/8/087201
  19. W. H. Lee, Y. T. Lee, H. Takao, K. Sawada, and M. Ishida, "Fabrication of thermoelectric sensor using silicon-on-insulator structure", Jpn. J. Appl. Phys. 46, 7232 (2007). https://doi.org/10.1143/JJAP.46.7232
  20. L. M. Goncalves, C. Couto, P. Alpuim, D.M. Rowe, and J. H. Correia, "Thermoelectric microstructures of Bi2Te3/Sb2Te3 for a self-calibrated micro-pyrometer", Sens. Actuators A 130-31, 346 (2006). https://doi.org/10.1016/j.sna.2005.10.014