References
- B. J. Chalmers, L. Musaba and D. F. Gosden, "Variable -Frequency Synchronous Motor Drives for Electrical Drives", IEEE Transactions on Industry Applications, vol. 32 no. 4, pp. 896-903, August 1996.
- B. J. Chalmers, R. Akmese and L. Musaba, "Design and Field Weakening Performance of Permanent- Magnet/Reluctance Motor with Two-Part Rotor", IEE Proceedings-Electric Power Applications, vol. 145, no. 2, 1998.
- W. Guo, Z. Zhao and Y. Zhang, "Analysis and Experimental Study of Slot Effect in Synchronous Reluctance Permanent Magnet Motors", 5th International Power Electronics and Motion Control Conference -IPEMC 2006-, August 2006.
- W. Guo and Z. Zhao, "Design and Experiments of Two Glued Axially Laminated Synchronous Reluctance Permanent Magnetic Motors, International Conference on Power Electronics and Drive Systems -PEDS 2005-, 2005.
- P. Niazi, H. A. Toliyat, D. H. Cheong and J. C. Kim, "A Low-Cost and Efficient Permanent-Magnet- Assisted Synchronous Reluctance Motor Drive", IEEE Transactions on Industry Applications, vol. 43 no. 2, pp. 542-550, 2007. https://doi.org/10.1109/TIA.2006.890033
- P. Niazi and H. A. Toliyat, "Design of a Low-Cost Concentric Winding Permanent Magnet Assisted Synchronous Reluctance Motor Drive, IEEE 40th IAS Annual Meeting, 2005.
- S. Talebi, P. Niazi and H. A. Toliyat, "Design of a Permanent Magnet Assisted Synchronous Reluctance Motors Made Easy", IEEE 42nd IAS Annual Meeting, September 2007.
- P. Guglielmi, G. Giraudo, G.M. Pellegrino and A. Vagati, "Pm Assisted Synchronous Reluctance Drive for Minimal Hybrid Application", IEEE 39th IAS Annual Meeting, October 2004.
- N. Bianchi, S. Bolognani, D. Bon and M. Dai Pre, "Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and Pm Assisted Synchronous Reluctance Motors", IEEE Transactions on Industry Applications, vol. 45 no. 3, pp. 921-928, May 2009. https://doi.org/10.1109/TIA.2009.2018960
- C. L. Gu, B. J. Chalmers and C. W. Lu, "Rotor Design Optimization of a Synchronous Machine with Two Part Rotor", IEEE International Electric Machines and Drives Conference, 1997.
- E. Kandemir Beser, S. Camur, B. Arifoglu and E. Beser, "Application of a Four-pole Hybrid Motor Structure Suitable for Modifying the Rotor Hybridization Ratio", International Review of Electrical Engineering, vol.5, no.5, pp. 2049-2056, September-October 2010.
- W. L. Soong, D. A. Staton and T. J. E. Miller, "Design of a New Axially-Laminated Interior Permanent Magnet Motor", IEEE Transactions on Industry Applications, vol. 31 no. 2, pp. 358-367, May 1995. https://doi.org/10.1109/28.370285
- I. Boldea and S. Nasar, "Emerging Electric Machines with Axially Laminated Anisotropic Rotors: a Review", Electrical Machines and Power Systems, vol. 19, pp. 673-704, 1991. https://doi.org/10.1080/07313569108909557
Cited by
- Torque Characteristic With Respect to the Load Angle of a Permanent Magnet Motor vol.48, pp.11, 2012, https://doi.org/10.1109/TMAG.2012.2203353
- Comparison of Two Rotor Configurations by Changing the Amount of Magnet and Reluctance Components vol.10, pp.1, 2015, https://doi.org/10.5370/JEET.2015.10.1.155