DOI QR코드

DOI QR Code

A New Moving-magnet Type Linear Actuator utilizing Flux Concentration Permanent Magnet Arrangement

  • Goto, Akira (Ishii Tool & Engineering Corporation) ;
  • Okamoto, Takuya (Ishii Tool & Engineering Corporation) ;
  • Ikariga, Atsushi (Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University) ;
  • Todaka, Takashi (Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University) ;
  • Enokizono, Masato (Department of Electrical and Electronic Engineering, Faculty of Engineering, Oita University)
  • 투고 : 2010.12.28
  • 심사 : 2011.12.03
  • 발행 : 2012.05.01

초록

This paper presents a moving-magnet type linear actuator designed by using flux concentration type permanent magnet arrangement, which can generate higher magnetic flux density in air-gap. In this construction, detent force which is induced by both slot-effect and end-effect becomes larger due to strong attractive forces. To reduce cogging force we have employed a modular mover structure of two magnetic pole sections connected with a center yoke. The improved motor performance is demonstrated with the prototype machine.

키워드

참고문헌

  1. H. Luo, J. Wu and W. Chang, "Minimizing Thrust Fluctuation in Moving-Magnet Permanent-Magnet Brushless Linear DC Motor," IEEE Transactions on Magnetics, vol. 43, no. 5, pp. 1968-1972, 2007. https://doi.org/10.1109/TMAG.2007.892081
  2. M. Sanada, S. Morimoto, Y. Takeda, "Interior Permanent Magnet Linear Synchronous Motor for High Performance Device," IEEE Transactions on Industry Application, vol. 33, no. 4, pp. 966-972, 1997. https://doi.org/10.1109/28.605738
  3. S. Zeze, T. Todaka, M. Enokizono, "Magnetic Field Analysis of Concentrated Surface Permanent Magnetic Synchronous Motor," Journal of the Japan Society of Applied Electromagnetics and Mechanics, vol. 17, Supplement September 2009, pp. S121- S124, 2009.
  4. Atushi Ikariga, Hiroyasu Shimoji, Takashi Todaka and Masato Enokizono "High-density permanent magnet machines", International Journal of Applied Electromagnetics and Mechanics, vol. 25, no. 1-4, pp. 19-23, 2007.
  5. Y-J Kim, M. Watada and H. Dohmeki, "Reduction of the Cogging Force at the Outlet Edge of a Stationary Discontinuous Primary Linear Synchronous Motor," IEEE Transactions on Magnetics, vol. 43, no. 1, pp. 40-45, 2007. https://doi.org/10.1109/TMAG.2006.884962
  6. I.-S. Jung, J. Hur, D.-S. Hyun, "Performance Analysis of Skewed PM Linear Synchronous Motor According to Various Design Parameter," IEEE Transactions on Magnetics, vol. 37, no. 5, pp. 3653-3657, 2001. https://doi.org/10.1109/20.952683
  7. T. Li and G. Slemon, "Reduction of Cogging Torque in Permanent Magnet Motor," IEEE Transactions on Magnetics, vol. 24, No. 6, pp. 2901-2903, 1988. https://doi.org/10.1109/20.92282
  8. Tomoyuki Lee, Naoki Maki, "Propulsive Force Simulation of Cylindrical Synchronous Motors and Improvement in the Propulsive Force Fluctuations," IEEJ Trans. IA, vol.126, no.4, pp.519-525, 2006. https://doi.org/10.1541/ieejias.126.519

피인용 문헌

  1. Characteristics Analysis and Design of a Novel Magnetic Contactor for a 220 V/85 A vol.49, pp.11, 2013, https://doi.org/10.1109/TMAG.2013.2268054
  2. Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm vol.9, pp.3, 2014, https://doi.org/10.5370/JEET.2014.9.3.859
  3. Optimal Design of a Novel Permanent Magnetic Actuator using Evolutionary Strategy Algorithm and Kriging Meta-model vol.9, pp.2, 2014, https://doi.org/10.5370/JEET.2014.9.2.471
  4. Comparative Study of Stator Configurations of a Permanent Magnet Linear Oscillating Actuator for Orbital Friction Vibration Actuator vol.7, pp.6, 2017, https://doi.org/10.3390/app7060630