한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권4호
  • /
  • Pages.357-366
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

재구성형 모듈러셀의 팔레트-치구 할당: 통합적 접근

Pallet-fixture Allocation in Reconfigurable Manufacturing Cells: An Integrative Approach

  • Han, Su-Min (Automation and System Research Institute / Department of Industrial Engineering, Seoul Nat'l Univ.) ;
  • Seo, Jin-Wu (Automation and System Research Institute / Department of Industrial Engineering, Seoul Nat'l Univ.) ;
  • Park, Jin-Woo (Automation and System Research Institute / Department of Industrial Engineering, Seoul Nat'l Univ.) ;
  • Lee, Jong-Kuk (Doosan Infracore, Ltd.) ;
  • Kang, Kyung-Chul (Doosan Infracore, Ltd.) ;
  • Lee, Sang-Ho (Doosan Infracore, Ltd.) ;
  • Moon, Jum-Seang (Doosan Infracore, Ltd.)
  • 투고 : 2012.01.13
  • 심사 : 2012.02.17
  • 발행 : 2012.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To schedule a Reconfigurable Manufacturing Cell (RMC), reconfiguration and setting decisions should be made first. Those decisions, together with characteristics of production orders, affect attainable performance of a system. So an integrative approach is required considering all decisions and characteristics rather than dealing with each of them separately. Pallet-fixture allocation, as a decision problem in setting, which determines the number of pallets to be equipped with each fixture type to produce different types of products, has rarely been investigated. In this study, several pallet-fixture allocation rules are proposed including both simple and novel ones. Then system performance is investigated through various combinations of setting and scheduling decisions (rules) for given system configurations and production orders, via simulation. The result shows that one of proposed pallet-fixture allocation rules which considers both configuration and order characteristic outperforms the others, justifying the necessity of an integrative approach in the RMC operation.

키워드

참고문헌

  1. Rahimifard, S. and Newman, S., "Simultaneous Scheduling of Workpieces, Fixtures and Cutting Tools within Flexible Machining Cells," Int. J. Prod. Res., Vol. 35, No. 9, pp. 2379-2396, 1997. https://doi.org/10.1080/002075497194552
  2. Rahimifard, S. and Newman, S., "The Application of Information Systems for the Design and Operation of Flexible Machining Cells," J. Intelligent Manufacturing, Vol. 2, pp. 21-27, 1999.
  3. Solot, P., "A Heuristic Method to Determine the Number of Pallets in a Flexible Manufacturing System with Several Pallet Types," Int. J. Flexible Mfg. Sys., Vol. 2, No. 3, pp. 191-216, 1990. https://doi.org/10.1007/BF00404672
  4. Solot, P. and Bastos J., "MULTIQ: A Queueing Model for FMSs with Several Pallet Types," J. Opl. Res. Soc., Vol. 39, No. 9, pp. 811-821, 1988. https://doi.org/10.1057/jors.1988.141
  5. Shanthikumar, J. and Buzacott, J., "Open Queueing Network Models of Dynamic Job Shops," Int. J. Prod. Res., Vol. 19, No. 3, pp. 255-266, 1981. https://doi.org/10.1080/00207548108956652
  6. Sethi, S. P., Sriskandarajah, C., Van de Velde, S., Wang, M. W. and Hoogeveen, H., "Minimizing Makespan in a Pallet-Constrained Flowshop," J. Sched., Vol. 2, No. 3, pp. 115-133, 1999. https://doi.org/10.1002/(SICI)1099-1425(199905/06)2:3<115::AID-JOS20>3.0.CO;2-U
  7. Gilmore, P. and Gomory, R., "Sequencing a One State-Variable Machine: A Solvable Case of the Traveling Salesman Problem," Op. Res., Vol. 12, No. 5, pp. 655-679, 1964. https://doi.org/10.1287/opre.12.5.655
  8. Denzler, D., Boe, W. and Duplaga, E., "An Experimental Investigation of FMS Scheduling Rules under Uncertainty," J. Op. Mgt., Vol. 7, No. 1-2, pp. 139-151. 1987. https://doi.org/10.1016/0272-6963(87)90013-1
  9. Mashaei, M., Lennartson, B., Sannehed, F. and Abbestam, G., "Optimal Number of Pallets for Reconfigurable Cyclic Manufacturing Plants," Proc. of Emerging Technologies & Factory Automation Conf., 2009.
  10. Lee, D. and Ryo, I., "A Study on Scheduling by Mixed Dispatching Rule in Flexible Manufacturing Systems," J. Soc. of Korea Industrial and Systems Engineering, Vol. 21, No. 47, pp. 35-46, 1998.
  11. Park, J., Seo, J. and Park, J., "RMC scheduling considering setup and pallet constrains," Proc. of KIIE/KORMS Joint Conf., 2010.

피인용 문헌

  1. Determination of the Pallet Quantity Using Simulation in the FMS for Aircraft Parts vol.41, pp.4, 2018, https://doi.org/10.11627/jkise.2018.41.4.059