Design & Manufacturing
- 제6권1호
- /
- Pages.1-4
- /
- 2012
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
사출성형금형에서 직선채널과 배플의 냉각효율 비교
Comparison of Linear Channel and Baffle for Cooling Rate in Injection Mold
- Moon, Young-Bae (Graduate School of Mechanical Engineering, Pukyong National University) ;
- Choi, Youn-Sik (Dept. of Mechatronics, Korea Polytechnic VI) ;
-
Jeong, Yeong-Deug
(Division of Mechanical Engineering, Pukyong National University)
- 투고 : 2011.10.06
- 심사 : 2012.04.13
- 발행 : 2012.06.29
초록
Plastic products are producted more than 70% of total processes in the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. In this study, it was made a comparative study about cooling of linear channels and baffles and observed the variation of mold temperature on the coolant's temperature. As the result, the linear channel's cooling rate had faster than baffles and as coolant's temperature was increased, difference of cooling time was increased. Result of this study will be used widely to design for cooling system of injection mold.