Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지
DOI QR코드

DOI QR Code

The Static Collapse Characteristics of CFRP Single and Double Hat Shaped Section Members according to the Interface Number for Lightweight

경량화용 CFRP 단일 모자형 부재와 CFRP 이중 모자형 부재의 계면수 변화에 따른 정적압궤특성

  • Hwang, Woo-Chae (BK21 Education Center of Mould Technology for Advanced Material & Parts, Chosun University) ;
  • Cha, Cheon-Seok (Fire Protections and Safety Engineering, Dongkang College) ;
  • Yang, In-Young (Department of Mechanical Design Engineering, Chosun University)
  • 황우채 (조선대학교 BK 21 첨단소재부품금형기술인력양성사업단) ;
  • 차천석 (동강대학 소방안전관리과) ;
  • 양인영 (조선대학교 기계설계공학과)
  • Received : 2012.09.11
  • Accepted : 2012.12.03
  • Published : 2012.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Currently, the most important purpose in designing automobile is environment-friendly and safety performance aspect. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a wide application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. In this study, experimental investigations are carried out for CFRP single and double hat shaped section member in order to study the effect of various stacking condition. They were cured by heating to the appropriate curing temperature($130^{\circ}C$) by means of a heater at the vacuum bag of the autoclave. The stacking conditions were selected to investigate the effect of the interface numbers. The CFRP single and double hat shaped section members which manufactured from unidirectional prepreg sheets were made of 8ply. The static collapse tests performed and the collapse mode and energy absorption capability were analyzed according to interface number.

Keywords

References

  1. K. S. Lee, H. K. Seo, Y. J. Yang, W. C. Hwang, K. H. Im and I. Y. Yang, "Collapse behavior evaluation of hybrid thin-walled member by stacking condition." Trans. Nonferrous Met. Soc. Chinas Vol. 21, pp. s135-s140, 2011. https://doi.org/10.1016/S1003-6326(11)61077-7
  2. S. Li and S. R. Reid, "Relationship Between the Elastic Bucking of Square Tubes and Rectangular Plates." International Journal of Applied Mechanics Vol. 57, pp. 969-973, 1990. https://doi.org/10.1115/1.2897669
  3. M. Avalle and G. Belingardi, "Experimental evaluation of the strain field history during plastic progressive folding of aluminum circular tubes." Int. J. Mech. Sci., Vol. 39, pp. 575-583, 1990.
  4. A. A. Singace, "Axial crushing analysis of tubes deforming in the multi-mode." Int. J. Mech. Sci., Vol. 41, pp. 865-890, 1999. https://doi.org/10.1016/S0020-7403(98)00052-6
  5. S. K. Kim, K. H. Im, Y. N. Kim, J. W. Park, I. Y. Yang and T. Adachi, "On the characteristics of energy absorption control in thin-walled members for the use of vehicular structures." Key Engineering Materials Vol. 233-236, pp. 239-244, 2003. https://doi.org/10.4028/www.scientific.net/KEM.233-236.239
  6. N. Aya and K. Takahashi, "Energy absorption characteristics of vehicles body structure."Japan Society of Automotive Engineers Bulletin 7:65-74, 1976.
  7. M. Tani and A. Funahashi, "Energy absorption by the plastic deformation of body structural members." Paper 783068 presented at S.A.E. Annual Meeting, Detroit, February 1978. 2002.
  8. Q. Wang, Z. Fan and L. Gui, "Theoretical analysis for axial crushing behaviour of aluminium foam-filled hat sections." Int. J. Mech. Sci. 49: 515-521, 2007. https://doi.org/10.1016/j.ijmecsci.2006.06.011
  9. C. S. Cha, J. Y. Kang and I. Y. Yang, "Axial Impact Collapse Analysis of Spot Welded Hat shaped Section member," KSME International Journal, Vol. 15. pp. 180-191. 2001.
  10. M. D. White, N. Jones and W. Abramowicz, " Theoretical Analysis for the Quasi-static Axial Crushing of Top-hat and Double-hat Thin-walled Sections," Int. J. Mech. Sci., Vol. 41, pp. 209-233, 1999. https://doi.org/10.1016/S0020-7403(98)00048-4
  11. M. Avalle and G. Belingardi, "Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminum Circular Tubes," Int. J. Mech. Sci., Vol. 39, pp. 575-583, 1997. https://doi.org/10.1016/S0020-7403(96)00063-X
  12. S. Li and S. R. Reid, "Relationship Between theElastic Bucking of Square Tubes and Rectangular Plates,"International Journal of Applied Mechanics, Vol. 57, pp. 969-973.pp. 239-244, 1990. https://doi.org/10.1115/1.2897669
  13. Y. N. Kim, J. J. Hwang, K. Y. Baek, C. S. Cha and I. Y. Yang, "Impact Collapse Characteristics of CF/Epoxy Composite Tubes for Light-weights," KSME International Journal, Vol. 17, pp. 48-56, 2003. https://doi.org/10.1007/BF02984285
  14. B. J. Kim and S. J. Heo, "Collapse Characteristics of Aluminum Extrusions Filled with Structural Foam for Space Frame Vehicles" Inernational Journal of Automotive Technology 4: 141-147.2007, 2003.
  15. A. G. Hanssen, M. Langseth and O. S. Hopperstad, "Optimum Design for Energy Absorption of Square Aluminum Columns with Aluminium foam Filler."Int. J. Mech. Sci. 43: 153-176, 2001. https://doi.org/10.1016/S0020-7403(99)00108-3
  16. G. L. Farley and R. M. Jones, "Prediction of Energy- Absorption Capability of Composite tubes" Journal of Composite Materials Vol. 26, pp. 388-404, 1991.
  17. A. G. Mamilis, D. E. Manolakos, G. A. Demosthenous and W. Johnson, "Axial Plastic Collapse of Thin Bi-Material Tubes as Energy Dissipating Systems."  International Journal of Impact Engineering Vol. 11, pp. 185-196, 1991 https://doi.org/10.1016/0734-743X(91)90005-Z
  18. Y. N. Kim, H. S. Choi, C. S. Cha, K. H. Im, J. A. Jung and I. Y. Yang, "Influence of Stacking Sequence Conditions on the Characteristics of Impact Collapse using CFRP Thin-Wall Structures." The Korean Society of Mechanical Engineers Vol. 24, No. 12, pp. 2945-2951, 2000.