References
- Vardi J., Biller W. F., 1968, "Thermal behavior of an exhaust gas catalytic converter," Ind. Eng. Chem-Process Des Dev., 7(1):83-90. https://doi.org/10.1021/i260025a017
- Kuo J. C., Morgan C. R., Lassen H. G., "Mathematical modeling of CO and HC catalytic converter systems," SAE paper 710289.
- Harned J. L., Montgomery D. L., "Comparison of catalyst substrate for catalytic converter systems," SAE paper 730561.
- Oh S. H., Cavendish J. C., 1982, "Transients of monolithic catalytic converters: response to step changes in feedstream temperature as related to controlling automobile emissions," Ind Eng Chem Res;21:29-37. https://doi.org/10.1021/i300005a006
- Pattas K. N., Stamatelos A. M., Pistikopoulos P. K., Koltsakis G. C., Konstandinidis P. A., Volpi E., et al, 1994, "Transient modeling of 3-way catalytic converters," SAE paper 940934.
- Tischer, S., Correa, C. and Deutschmann, O., 2001, "Transient Three-Dimensional Simulations of a Catalytic Combustion Monolith Using Detailed Models for Heterogeneous and Homogeneous Reactions and Transport Phenomena," Catal. Today, 69, pp. 57-62. https://doi.org/10.1016/S0920-5861(01)00355-8
- Koltsakis, G. C., and Stamatelos, A. M., 1997, "Catalytic Automotive Exhaust Aftertreatment," Prog. Energy Combust. Sci., 23, pp. 1-37. https://doi.org/10.1016/S0360-1285(97)00003-8
- Lai, M. C., Lee, T., Kim, J. Y., Li, P., Chui, G. and Pakko, J. D., 1992, "Numerical and Experimental Characterization of Automotive Catalytic Converter Internal Flows," J. Fluids Struct., 6, pp. 451-470. https://doi.org/10.1016/0889-9746(92)90026-Y
- Charles N. Satterfield, 1981, "Mass Transfer in Heterogeneous Catalysis," Robert E. Krieger Publishing Company, Inc.
- Otto, N. C. and LeGray, W. J., 1980, "Mathematical Models for Catalytic Converter Performance," SAE Paper No. 800841.
- FLUENT 6.1.18, FLUENT Inc.
- S. Siemund, D. Schweich, J. P. Leclerc and J. Villermaux, 1995, "Modelling Three-Way Monolithic Catalytic Converter: Comparison Between Simulation and Experimental Data," Catalysis and Automotive Pollution Control, III, Studies in Surface Science and Catalysis, Vol. 96.
- T.Shamim, S.Sengupta, A.A.Adamczyk, 2002, "A comprehensive model to predict three way catalytic converter performance," Journal of Engineering for Gas Turbines and Power, April 2002, Vol. 124 / 421. https://doi.org/10.1115/1.1424295
- Ming Chen, Joe Aleixo, Shazam Williams & Thierry Leprince, "CFD modeling of three way catalytic converters with detailed catalytic surface reaction mechanism," DCL International Inc.
- Sandip Mazumder, "Modeling full scale monolith catalytic converters," Transactions of the ASME, 526 / Vol. 129, April 2007. https://doi.org/10.1115/1.2709655
- Depcik C., 2003 "Modeling reacting gases and aftertreatment devices for internal combustion engines," PhD in mechanical engineering. Ann Arbor, Michiganr: The University of Michigan.
- Young L. C., Finlayson B. A., 1976, "Mathematical models of the monolithic catalytic converter: part II. Application to automobile exhaust," AIChE J, 22(2):343-53. https://doi.org/10.1002/aic.690220217
- Christopher Depcik, Dennis Assanis, 2005, "One-dimensional automotive catalyst modeling," Progress in Energy and Combustion Science 31, pp. 308-369. https://doi.org/10.1016/j.pecs.2005.08.001
- Hua Lun, Niu Xiaoweiy, Zhou Liangz, 2010, "CFD simulation of the effect of monolith wall thickness on the light off performance of a catalytic converter," International journal of chemical reactor engineering, Vol. 8.