Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Performance of Hybrid Coupled Shear Wall System Considering Connection Details

접합부 상세에 따른 복합 병렬 전단벽 시스템의 구조 성능

  • Received : 2012.02.04
  • Accepted : 2012.04.27
  • Published : 2012.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

In high multistory buildings, hybrid coupled shear walls can provide an efficient structural system to resist horizontal force due to wind and seismic loads. Hybrid coupled shear walls are usually built over the whole height of the building and are laid out either as a series of walls coupled by steel beams with openings to accommodate doors, elevator walls, windows and corridors. In this paper, the behavior characteristics of hybrid coupled shear wall system considering connection details is examined through results of an experimental research program where 5 two-thirds scale specimens were tested under cyclic loading. Such connections details are typically employed in hybrid coupling wall system consisting of steel coupling beams and reinforced concrete shear wall. The test variables of this study are embedment length of steel coupling beam and wall thickness of concrete shear wall. The results and discussion presented in this paper provide fundamental data for seismic behavior of hybrid coupled shear wall systems.

복합 병렬 전단벽(Coupled shear walls)은 커플링 보와 철근콘크리트 벽체로 구성되어 바람이나 지진 등의 횡하중으로부터 유발된 전도모멘트의 상당 부분을 철골 연결보의 커플링 작용에 의하여 골조 작용(Frame action)을 의하여 횡력에 효율적으로 저항하게 된다. 본 연구에서는 접합부 상세에 따른 복합병렬 전단벽의 접합부 강도에 대한 규준식을 정립하기 위한 선행연구로서 병렬 전단벽 접합부에서 커플링 보의 매립길이 및 벽체 두께를 주변수로 실험적 연구를 수행하여 접합부 상세에 따른 복합 병렬 전단벽 시스템의 거동특성을 규명하고자 하였다. 본 실험결과, 실험체의 거동 및 내력은 매립길이 및 접합부 상세에 많은 영향을 받는 것으로 나타났으며 향후 설계시 이에 대한 영향을 반영해야 할 것으로 판단된다.

Keywords

References

  1. 김선웅, 박완신, 윤현도, 장영일, 김경태, "복합 병렬전단벽 접합부에 대한 실험적 연구", 한국콘크리트 학회 2011년 추계학술발표대회논문집, 제23권 2호, 2011, pp.7-8.
  2. 윤현도, 박완신, 한병찬, 황선경, 이재연, 이원호, "철근 콘크리트 벽체에 매립된 철골 커플링 보 접합부의 전단강도", 대한건축학회 논문집(구조계), 제20권 5호, 2004, pp.43-50.
  3. 윤현도, 박완신, 황선경, 양일승, 김선우, 한민기, "접합부 상세에 따른 철골 커플링 보-벽체 접합부의 지압강도", 대한건축학회 논문집(구조계), 제20권 12호, 2004, pp.61-68.
  4. American Concrete Institute (ACI) Committee 318., Building Code Requirements for Structural Concrete and Commentary (ACI 318-11), Farmington Hills, MI, 2011, p.503.
  5. Galano, L. and Vignoli, A., "Seismic Behavior of Short Coupling Beams with Different Reinforcement Layouts", ACI Structural Journal, vol. 97, No. 6, 2000, pp.876-885.
  6. Gong, B., Harries, K. A. and Shahrooz, B. M., "Behaviour and Design of Reinforced Concrete, Steel, and Steel-Concrete Coupling Beams", Earthquake Spectra, vol. 16, No. 4, 2000, pp.775-799. https://doi.org/10.1193/1.1586139
  7. Harries, K. A., "Seismic Design and Retrofit of Coupled Walls Using Structural Steel", PhD Thesis, McGill University, Montreal, 1995, p.229.
  8. Kriz, L. B. and Raths, C. H., "Connection in Precast Concrete Structures - Shear strength of Column Heads", Prestressed Concrete Institute, vol. 8, No. 6, 1963, pp.45-75.
  9. Marcakis, K. and Mitchell, D., "Precast Concrete Connection with Embedded Steel Member", Journal Prestressed Concrete Institute, vol. 25, No. 4, 1980, pp.86-116.
  10. Mattock, A. H. and Gaafar, G. H., "Strength of Embedded Steel Sections as Brackets", ACI Journal, vol. 79, No. 9, 1982, pp.83-93.
  11. Park, W. S. and Yun, H. D., "Seismic performance of pseudo strain - hardening cementitious composite coupling beam with different reinforcement details", Composites : Part B, vol. 42, No. 6, 2011, pp.1421-1444. https://doi.org/10.1016/j.compositesa.2011.06.006
  12. PCI Design Handbook -Precast and Prestressed Concrete, Prestressed Concrete Institute, Chicago, 1978, p.370.
  13. Roeder, C. W. and Popov, E. P., "Eccentrically Braced Steel Frames for Earthquakes", Journal of Structural Divisions, ASCE, vol. 104, No. 3, 1978, pp.391-411.
  14. Shahrooz, B. M. and Fortney, J. P., "The next generation of coupling beams", Report No. UC-CII 05/01, Cincinnati Infrastructure Institute, University of Cincinnati, Ohio, 2005, p.346.
  15. Shahrooz, B. M., Remmetter, M. A. and Qin, F., "Seismic Design and Performance of Composite Coupled Walls", Journal of the Structural Division, ASCE, vol. 19, No. 11, 1993, pp.3291-3309.
  16. Shen et al., "Nonlinear Behavior of Posttensioned Hybrid Coupled Wall Subassemblages", ASCE Journal of Structural Engineering, vol. 128, No. 10, 2002, pp.1290-1300. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1290)
  17. Tassios, T. P., Moretti, M. and Bezas, A., "On the Coupling Behavior and Ductility of Reinforced Concrete Coupling Beams of Shear Walls", ACI Structural Journal, vol. 93, No. 6, 1996, pp.711-720.
  18. Williams A., "The Bearing Capscity of Concrete Loaded over a Limited Area", Technical Report No. 526, Cement and Concrete Institute, 1963, pp.45-75.

Cited by

  1. Numerical assessment of the load transfer in steel coupling beam-reinforced concrete shear wall connection vol.20, pp.1, 2012, https://doi.org/10.1007/s42107-018-0086-4
  2. Seismic Retrofitting of Reinforced-Concrete Coupled Shear Walls: A Review vol.25, pp.3, 2012, https://doi.org/10.1061/(asce)sc.1943-5576.0000489