DOI QR코드

DOI QR Code

Influence of Cement Matrix's Compressive Strength and Replacement of Expansive Admixture on the Mechanical Properties of Synthetic Polyethylene (PE) Fiber-Reinforced Strain-Hardening Cement-Based Composites (SHCCs)

압축강도와 팽창재 대체에 따른 폴리에틸렌 합성섬유로 보강된 변형 경화형 시멘트 복합체의 역학적 특성

  • Received : 2012.01.19
  • Accepted : 2012.03.08
  • Published : 2012.03.30

Abstract

In order to improve the dimensional stability and mechanical performance of cement-based composites, the effect of an expansive admixture based on calcium sulphoaluminate (CSA) on the shrinkage and mechanical properties of strain-hardening cement-based composite (SHCC), which exhibits multiple cracks and pseudo strain-hardening behavior in the direct tension, is investigated. Polyethylene fibers reinforced SHCC mixtures with three levels (30, 70, and 100MPa) of compressive strength were compared through free shrinkage, compressive strength, flexural strength, and direct tensile strength measurements. The SHCC mixtures were cast with and without replacing 10% of Portland cement content with CSA admixture. According to test results, CSA admixture is effective in reducing shrinkage of SHCC material. SHCC mixture with CSA admixture exhibited a little higher strength than companion mixture without CSA admixture.

변형경화형 시멘트 복합체(SHCC)는 직접인장 상황에서 FRCCs에 비해 우수한 변형경화 특성을 갖는 재료이다. 하지만 SHCC는 일반적인 콘크리트에 비해서 시멘트비율이 높은 부배합 이며, 이에 따라서 자기수축이 큰 특성을 갖는 재료이다. 따라서 시멘트 복합체 내에 팽창재를 대체함으로써 수축저감을 통한 성능향상을 기대하였다. 이 연구에서는 각 강도별 SHCC의 배합에 팽창재를 대체함에 따른 역학적특성을 평가하고자 하였다. 시험결과 설계기준 압축강도 70MPa 배합이 압축, 인장, 휨, 시험에서 우수한 역학적 특성을 나타내었으며, 균열 특성에서는 팽창재를 대체한 SHCC가 균열분산 및 연성에서 우수한 특성을 나타내었다.

Keywords

References

  1. 박완신, 윤현도, 전에스더, 남상현, "섬유의 혼입이 변형 경화형 시멘트 복합체에 미치는 영향", 대한건축학회 논문집 구조계, 제25권 11호, 2009, pp.29-36.
  2. 송종택, 조진상, 전준영, "산업부산물을 이용한 CSA계 팽창시멘트의 제조 및 특성", 한국세라믹학회지, 제38권 2호, 2001, pp.183-192.
  3. 윤현도, 김용철, 김선우, "보강섬유 종류에 따른 변형경화형 시멘트 복합체의 거동특성", 대한건축학회 논문집 구조계, 제 24권 5호, 2008, pp.141-148.
  4. 이선우, 김남호, "CSA 팽창재의 콘크리트에 사용", 한국콘크리트학회 논문집, 제8권 6호, 1996, pp.59-66.
  5. 이영오, 윤현도, "팽창재 치환율에 따른 섬유보강 시멘트 복합체의 역학적 특성", 한국콘크리트학회 논문집, 제22권 5호, 2010, pp.617-624. https://doi.org/10.4334/JKCI.2010.22.5.617
  6. 전준영, 송종택, "칼슘 설포알루미네이트계 팽창재의 제조 및 기초 물성", 한국세라믹학회지, 제37권 4호, 2000, pp.388-394.
  7. 정민철, "Meta kaolin 및 Silica Fume을 이용한 고성능 고강도 시멘트 모르타르 특성에 관한 연구", 한국세라믹학회지, 제33권 5호, 1996, pp.519-523.
  8. 한국콘크리트 학회, "콘크리트 구조설계 기준 해설", 2007.
  9. 황인동, 염회남, 정윤중, "팽창재를 포함한 시멘트 모르터의 팽창요인", 한국세라믹학회지, 제37권 6호, 2000, pp.517-616.
  10. Charlotte Famy, Hal F. W. Taylor, "Ettringite in hydration of portland cement concrete and its occurrence in mature concretes", ACI Materials Journal, vol. 98, No. 4, 2001, pp.350-356.
  11. CRDC 621, "Corps of Engineers Sprcification for Nonshrink Grout", 1980.
  12. Ei-ichi. Tazawa, Shingo. Miyazawa, "Experimental Study on Mechanism of Autogenous Shrinkage of Concrete", Cement and Concrete Research, vol. 25, No. 8, 1995, pp.1633-1638. https://doi.org/10.1016/0008-8846(95)00159-X
  13. Houssam A. Toutanji, "Properties of polypropylene fiber reinforced silica fume expansive-cement concrete", Construction and Building Material, vol. 13, 1999, pp.171-177. https://doi.org/10.1016/S0950-0618(99)00027-6
  14. Mohammed Seddik Meddaha, Masahiro Suzuki, Ryoichi Sato, "Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete", Concrete and Building Materials, vol. 25, No. 1, 2011, pp.239-250. https://doi.org/10.1016/j.conbuildmat.2010.06.033
  15. Naaman. A. E. and Reinhardt. H. W., "Characterization of high performance fiber reinforced cement composites-HPFRCC.", Performance Fiber Reinforced Cement Composites 2(HPFRCC2), pp.1-23.
  16. P. Kumar Mehta, Paulo J. M. Monteiro, Concrete, 3th edition, 2006.