초록
슬립폼 공법에 있어서 초기경화시간은 콘크리트가 거푸집에서 안전하게 빠져나올 수 있는 굳기를 갖게 되는 콘크리트 타설 후 경화시간으로써 슬립폼 시스템의 상승속도를 결정하는 중요한 요소이다. 따라서 슬립폼 시스템의 안전성 확보와 콘크리트의 시공품질을 확보하도록 초기경화시간을 파악하는 기술이 필요하다. 본 논문에서는 초음파를 이용하는 기법 중 표면파 속도를 이용하여 콘크리트의 경화정도를 파악하여 초기경화시간을 추정함으로써 슬립폼 시스템의 상승 시기를 결정하는 연구를 수행하였다. 관입저항시험과 압축강도시험을 수행하여 콘크리트의 초기경화시간과 압축강도와의 관계를 규명하였고, 또한 압축강도와 표면파 속도와의 관계를 규명하기 위해 초음파시험을 동시에 수행하였다. 표면파 속도를 측정하기 위해 연속웨이블릿변환을 사용하였으며, 이때 수치해석을 통해 연속웨이블릿변환의 사용에 대한 타당성을 입증하였다. 이로부터 슬립폼 시스템의 상승에 요구되는 표면파 전파속도를 제안하였으며, 슬립폼 시스템의 축소모형실험을 수행하여 제안한 표면파 속도가 슬립폼 상승 시기를 결정하는데 사용될 수 있음을 입증하였다.
The early setting time of concrete is an important factor determining the slip up velocity of the slip-form system. Accordingly, need is for a technique evaluating the early setting time in order to secure the safety of the slip-form system and the construction quality of concrete. This paper intends to estimate the early setting time by evaluating the setting degree of concrete using surface wave velocity so as to determine the slip up time of the slip-form system. Penetration resistance test and compressive strength test are performed first to clarify the relationship between the early setting time of concrete and the compressive strength. Then, compressive strength test and ultrasonic wave test are conducted to examine the relation between the compressive strength and the surface wave velocity. Continuous wavelet transform is adopted to measure the surface wave velocity. Numerical analysis is carried out to demonstrate the appropriateness of the application of continuous wavelet transform. Based on these results, the propagation velocity of the surface wave required for the slip up of slip-form system is suggested. Finally, a reduced model test of the slip-form system is conducted to verify the feasibility of the proposed surface wave velocity for the determination of th slip up velocity.